Thrustmaster TH8RS Ultimate Sequential Shifter MOD
Вставка
- Опубліковано 2 січ 2020
- A mod I made that brings the TH8RS shifter sequential mode into completely new level.
Files available for free on my website: petermakesthings.co.uk/produc...
Purchase link: kapral.store/collections/pmt-...
NOTE: after recording the video I've been using the mod quite intensively and found a major flaw in the design - the friction between shifter shaft and the spring ball screws is resulting in occasional locking of the shifter and scratches on the shaft. You could use some kind of grease to prevent that but it would make the whole thing messy, so I inverted the design: springs are on the top and ball screws right over the base plate. At this height the shaft has a teflon insert therefore the friction is minimised and everything works smoothly.
If you like my designs consider a small tip: paypal.me/PeterMakesThings?lo...
Join me on Facebook: / peter-makes-things-106...
Parts list:
3D models
4x M3 25mm screws
4x M3 nuts
2x M4 nuts
2x M4 screws (around 15mm long)
4x M6*10mm Spring Ball Plunger screws (tinyurl.com/w6wjjx2)
2x Springs for 3d printer bed: 20mm * 7.5mm * 1.2mm (tinyurl.com/s4sbl6c)
Original concept by dukethirteen: www.thingiverse.com/thing:340...
Intro music: Borys Kozielski - Наука та технологія
READ THIS: After recording the video I've been using the mod quite intensively and found a major flaw in the design - the friction between shifter shaft and the spring ball screws is resulting in occasional locking of the shifter and scratches on the shaft. You could use some kind of grease to prevent that but it would make the whole thing messy, so I inverted the design: springs are on the top and ball screws right over the base plate. At this height the shaft has a teflon insert therefore the friction is minimised and everything works smoothly.
Peter I presume its still all the same hardware requirements? I will compile my list over the weekend for the bits I require.
Ps yet another awesome video and modification to improve
@@lurcho101 yup, same hardware, just inverted the model so it doesn't damage the shifter
@@petermakesthings7342 perfect cheers
can you share/show photos of the new design so we can get better understanding of it or do a video about it..
@@ahmedmohmed4346 you can see it on thingiverse (first 3d model picture, the holes for plunger screws are on the bottom rather than on the top of middle piece): www.thingiverse.com/thing:4082817/files
Impressive, that looks/sounds like a HUGE improvement.
Yeah, it is so much better tab the original
I'm going to have to make this to compliment the True QC I bought :) Great work as usual Peter, keep it up!
No fucking way, i was looking for a sequential mod for TH8A and no one ships to my country then i found this video and upon going to contacts i see you are from same city as me :D fantastic!
Just received the mod today and i must say the feeling is pretty good, the tactile feedback is subtle but for the price it's well worth it
Ordered this from Kapral from Co, US. I'm putting it together now and I can already tell this thing is amazing!!!!! Took me a bit to figure out a way to get it together but Absolutely loving it already! 😍
thank you , appreciate the feedback :)
Got mine a few days ago, ordered from the site. Delivery to Germany was very quick and without any problems. Also had a personal thank you note on the inside of the package. Very sweet, I appreciate such little things. So here's a big thank you from my side! :) To the mod: It's pretty solid and way better than the original crap. But the measurments could be a bit better on this one. The springs have a little to much play and the ball screws are a little bit out of line and that results in a tiny weird feeling while shifting. But I'm very pedantic on such things. But all in all a wonderful piece and the general feeling is awesome. But it's a bit noisy for my taste. But I guess that's because of the play at the springs. They make a little scratching sound that's very annoying while playing at night or in a silent environments. I will look for some more stiffer springs. That could be the solution. It's very quite when I fully preload the springs but then it's to hard to shift because the space for the movement of the shaft is getting too small. But as I already said, all in all it's a wonderful piece and for that money you won't get any better! Simple and working design. With a bit of skill you can make it even better. And it will get better by time I guess. It needs to run in a bit first. I will update you on this.
Wow Peter once again your genius amazes me haha 👍. Wish I had a damn 3d printer so I can make this mod. Awesome design Peter you are a true master my friend.
Thank you very much, and I would strongly recommend getting a 3d printer, it's the best toy an adult man can buy :)
You should look a creality 3d printers pretty good out the box and priced well
Hi Dave, I will be happy to print this mod for you and post it to you at your expense (cost price + freight).
@@TheMunkyMagic am sure on thingiverse you can select a company to do the print then post it but not sure what money is involved but I think you will use someone local to save on postage. Go have a look you might need to have a user account to check
@@TheMunkyMagic What's up man thanks for the offer. How much would you charge? Comment back and let me know cost and shipping. Would be awesome to have Peter's mod, he's amazing how he creates these mods. Have his quick release mods which are awesome. But yeah, sure would appreciate it if you could send me the info 😊.
Dave.
Where did you get those thumbscrews. would make switching between h patttern and seuqential much easier
What is your suggested infill for this project? Getting ready to print it now, all the hardware is in the mail. Thank you for the design
Ordered this from Kapral. Do you have a link for the thumbscrews please?
This looks awesome!! I will definitely order one when i got my TH8A! Do you have any design for TH8A mount on Playseat Challange??
any chance you could add the button that depresses the button inside the shifter to put it into sequential mode? thank you for everything you do
absolutely fantastic mod ,how much is shipping to the uk thanks.
What shift knob are you using? M9x1.25 thread pitch?
Peter do you prefer sequential or H pattern shifting in gaming?
Hi Peter, if I purchase this mod am I able to get it printed in black or red?
Great video Peter 👍. Where to get the thumbscrews and magnets? (sizes?) Thanks!
Magnets are 6mm in diameter, and the thumb screws I'm simply buying from eBay
I know I’m a bit late 😅 I really love your designs!! 🙏🏻 Would love to have that one in plexiglass, so it can go on top of the chrome plate maybe... Would be awesome as a separate design, maybe I’m wrong and this can’t be done technically.... but was just brainstorming about that. 😁 otherwise I’ll order it in black if that’s available 😬🙏🏻
there's a small button in the shifter that needs to be pressed in order for it to work in seq mode, therefore it's not possible to put a seq adapter directly on top of the silver h pattern plate, due to this using plexi would actually be pretty ugly cause the internals are not nice to look at :) plus plexi is pretty problematic and can break easily. if you have the means though I would definitely be interested to see one made :)
Donde puedo comprar esto?
Hi is this new mod design is final and it’s working properly? I’m ready to buy
Thanks
Does this come with the thumb screws?
Is it okay without the magnet?
Can you use this with the PS4?
Hey man this looks amazing.. I've been thinking of just using the sequential shifter on my th8a cause it's an inconvenience switching plates back and forth.. How much do you charge to make this? And would you ship it to ny?
tbh the shipping from UK would probably be more expensive than the mod, I'd suggest asking on reddit if somebody in your area could print it for you, the models are available for free and all the hardware can easily be found on ebay or aliexpress
bro you have to watch his other video "How to replace TH8A shifter plates without any tools"
oh i also have a magnet on my rig to hold the screws (and tool, because i havent gotten the thumb screws yet) while swapping plates so i dont drop or lose them. And using a crown royal bag to hold the plates.
Nice stuff man,I will most likely get one as soon as I can,I have a quick question tho,can you use this mod while having the mod for H pattern stiffness installed?
Great question. Would also like to know. Even though from all ive seen I imagine the answer is yes, both should be able to work together. Since the other mod is inside the shifter and he made this one on top/outside the shifter.
Yes you can:) I keep the h-mod in all the time even though I've been switching to seq quite often
@petermakesthings7342 hey brother I'll send you a donation but I can't find the files and everything on your site costs nothing. Am I missing something? I apologize if I am. I have all the parts in my bins and just need the stl but can't find a link to it. Like I said I could give you a donation first. You deserve money for your work.
I was expecting painted nails! Whats happening?
Do you ship to the USA?
Hi,,is it possible to use the sequential mode while the h-pattern mod was also installed?thanks
nope, shifter only works in h or seq, and the modes are changed via small switch underneath the top plate (H btn is not pressed, seq btn is pressed)
@@petermakesthings7342 We could externally mount the switch instead tho maybe ?? this one reason I have never used my TH8 as a seq shifting, too much faff messing around to swap between the two.
Great video what 3D printer do you use
Thanks, I use prusa MK2.5s
@@petermakesthings7342 thank you buddy I'll.look into now
Where I can buy it ?
Mod para Logitech G29 ?
I bought this from Kapral and I'm extremely disappointed. The spring binds up. The ball screws are smaller than shown here and barely make any contact (they either just barely click or they hold the shifter from shifting back to neutral.) The springs are loud and creaky. It feels overall worse. Doesn't look anything like what's shown here. There's no metal contacts on the spring piece that touches the screw. I've done a few upshifts and found that it just sticks in gear until I either increase the spring tension or release the ball tension enough that they don't click at all... or just rip it back into neutral by hand.
You mention that you shouldn't require any grease, but the collar that goes around the shaft rides along the printing lines and starts to raise up as well as bringing the spring with it causing it to bind and stop.
I'm going to give it a chance tonight during my Dirt Rally 2.0 streams, but at this point I think I just wasted $50 (shipping was as much as the device)
where to buy all in one ??
the mod can be purchased here: kapral.store/collections/pmt-peter-make-things/products/thrustmaster-th8rs-ultimate-sequential-shifter-mod-by-pmt
Hey Peter, does the mod also work on the TH8a? Great job mate!
yup, TH8a and TH8rs are the same, only difference is the usb cable TM includes in the box :)
@@petermakesthings7342 Thanks Peter, planning to buy it in the kapral store!
can i have one? where to buy
The 3d model is available for free, if you don't have a 3d printer just ask on Reddit or fb if somebody can print it for u
👏👏👍👌🎅🏻🇳🇴😷
Zrobiłbyś taki na sprzedaż?
ask my friend who's making some of my mods @ www.kapral.store if he can make one for you, it's not listed in products yet, so use the contact form
is anyone selling? I dont have a 3D printer and I would buy if anyone willing to ship to Europe. Thx!
Hi. I can help you with the 3D printing and shipment within Europe can be arranged.
@@Toniboy85 wonderful thank you so much :) can you contact me at andresmalo@gmail.com?
I wouldn't be able to use it, would break my ikea desk lol
u can always use lighter springs and unscrew the plungers a bit to limit the force :)