ASE A8 Engine Performance Boot Camp

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • Need an engine performance boost?
    Revisit crucial concepts and refine your troubleshooting skills in this power-packed 3-hour review of the ASE A8 Engine Performance Review. Deepen your understanding of scan tools, fuel systems, and electrical circuits. Conquer real-world scenarios with hands-on practice. Leave ready to tackle any engine challenge with confidence!
    Need help with your L-1? -------- masterautomoti...

КОМЕНТАРІ • 56

  • @leroyfleming3626
    @leroyfleming3626 5 місяців тому +8

    Just leave this video on repeat for a week like I did,you will pass the A-8. I scored a 23-25 on my recertification. Great video refresher.

  • @haromaster1988
    @haromaster1988 Місяць тому +1

    Thank you for this video. Between this, a book and some online test got 48-50.

  • @blakerudolph9504
    @blakerudolph9504 5 місяців тому +2

    Passed off of your videos and online practice tests. Thanks for making these man

  • @bernardocisneros4402
    @bernardocisneros4402 4 дні тому +1

    At minute 15:00 of this video, you have voltage drop values for certain parts of the circuit of a starter and alternator, but in another video you made, the values are different. Which are the correct values?

    • @MasterAutomotiveTraining
      @MasterAutomotiveTraining  3 дні тому +1

      I compared them all and they are the same except for one that has a PCM ground of .050v.

    • @bernardocisneros4402
      @bernardocisneros4402 3 дні тому

      ​​​@@MasterAutomotiveTraining Sorry, I should've pointed out which ones were different in the other video. The other video had 200 mV from B+ to starter and 300 mV across starter solenoid. Which values are correct?

  • @codyshaylyn
    @codyshaylyn 7 місяців тому +2

    Great videos Oscar thank your contributions to the trade its greatly appreciated.

  • @freddieco3487
    @freddieco3487 Місяць тому

    Start at 14:30

  • @farooqhussain7684
    @farooqhussain7684 8 місяців тому +3

    Thank you for your time and effort sir❤

  • @HugoMurillo-nr7ir
    @HugoMurillo-nr7ir 3 місяці тому +1

    I’m a technician over ten years always struggle to pass ase test. Going for this one next what book would you recommend. Just found out about your videos from another tech amazing stuff love the videos.

    • @MasterAutomotiveTraining
      @MasterAutomotiveTraining  3 місяці тому

      James Halderman's Engine performance book, however with what I've covered in the class you should be golden. Let me know if you have any other questions.

  • @fredlikes1
    @fredlikes1 8 місяців тому +3

    Thank you been watching your other videos on repeat on my way to work everyday so the information can stick! I want to get my smog license could you give me information on it thanks

  • @Klark-hm3cq
    @Klark-hm3cq 9 днів тому

    Great video! But sadly I don’t have much hope for the auto industry, at the dealership I work at they are starting new techs at a lower pay then the starting pay at McDonald lmao

  • @slightlymodded1
    @slightlymodded1 7 місяців тому

    leakdown question. Can you have low compression and bad leakdown results? And opposite, can you have good compression and bad leakdown results?

  • @garywcasejr4158
    @garywcasejr4158 8 місяців тому

    Oscar these are great I watch and re watch even as a Master . Could you possibly do a L1 series? That be great! Keep on brother!! Thank you!! Your friend in Columbus Ohio Bill

  • @E.1037s
    @E.1037s 2 місяці тому

    Thank you so much for the video. Great effort we learn from the best (master)

  • @codydouglass242
    @codydouglass242 3 місяці тому +1

    Can you get in without ase certificate

  • @leemoore3151
    @leemoore3151 3 місяці тому +1

    how do you do a running compression test on a single cylinder engine after doing static test?

    • @MasterAutomotiveTraining
      @MasterAutomotiveTraining  2 місяці тому +1

      Wouldn't be possible as you only have one cylinder. Id do a vacuum test instead.

  • @michaelgividen7784
    @michaelgividen7784 3 місяці тому +1

    This video was a huge help for me!! Thank you so much, passed my a8 first try thanks to the video.
    Is there any hope that you'll do I video for the transmission ase test in the future?

    • @Klark-hm3cq
      @Klark-hm3cq 3 місяці тому +1

      Was there a ton of wire diagrams?

    • @michaelgividen7784
      @michaelgividen7784 3 місяці тому +1

      @@Klark-hm3cq I had about 8 or 9. Most of them were pretty basic diagrams. A couple Were more complex

    • @Klark-hm3cq
      @Klark-hm3cq 3 місяці тому +1

      Was it the full 50 questions as well or a re-cert? Also what topics should I study on?

    • @michaelgividen7784
      @michaelgividen7784 3 місяці тому +1

      It was 60 questions. If you watch the a6 and a8 test prep video it will give you everything you need to pass. Very limited manufacture based questions. I saw one of 2, everything else was pretty generic

    • @Klark-hm3cq
      @Klark-hm3cq 3 місяці тому +1

      Sweet! What did you score

  • @flyguy061
    @flyguy061 7 місяців тому

    I love your videos, they have been great study material. I do have a question. Near the end of this segment, it's states that during vacuum test,due to clogged exhaust needle fluctuates from 12 to 24 on the gauge. During my reading I've known this to be from a broken valve spring. Is this a typo or mistake? Please explain . Thank you.
    On a similar note, can you guys do an in depth video on super and turbo charger operation and diagnosis? Thanks.

  • @balrajsingh3019
    @balrajsingh3019 5 місяців тому

    On V6 engine if one cat is clogged,it will set misfire code on same bank or other good cat bank?

  • @codydouglass242
    @codydouglass242 3 місяці тому +1

    No test yet

  • @righteousman8488
    @righteousman8488 8 місяців тому

    I am still struggling with my A8 ase test. I pray i pass it soon.

  • @shakeelsss
    @shakeelsss 8 місяців тому

    The A8 looks easier to me. I guess the online review is as good as being there in person.

  • @stryker4374
    @stryker4374 8 місяців тому +2

    It was great being there!

    • @MasterAutomotiveTraining
      @MasterAutomotiveTraining  8 місяців тому +3

      Great to have you bro! See you in the diag class!

    • @stryker4374
      @stryker4374 8 місяців тому +1

      Looking forward to it!​@MasterAutomotiveTraining

  • @coltcomphbar
    @coltcomphbar 2 місяці тому +1

    Bro is smart AF

  • @raven_themechanic
    @raven_themechanic 8 місяців тому +2

    I was soooo TIRED, sorry I missed the live.

  • @johnathanleepart9379
    @johnathanleepart9379 8 місяців тому

    i remember i had an 03 sn95 that had a clogged engine and exhaust put 2 cans off seafoam and some tranny fliud in the engin air filter and boom fixed lmao.

  • @shortmanjw08
    @shortmanjw08 3 місяці тому

    What’s the easiest ASE to pass

    • @Mooshhyyyy
      @Mooshhyyyy 3 місяці тому

      G1 maintenance and light repair

  • @freddieco3487
    @freddieco3487 Місяць тому

    1:48:45

  • @itsstunt340
    @itsstunt340 2 місяці тому

    1:29:20

  • @nickayivor8432
    @nickayivor8432 8 місяців тому

    Master Automotive Training Oscar Gomez
    Please can you help me I need training from your website please
    Oscar Gomez Master Automotive Training
    👍
    QUICK-WITTED Oscar Gomez Master Automotive Training
    From Nick Ayivor from London England UK 🇬🇧 ⏰️ 21:33pm Good Evening
    Brilliant interview with Carm Capriotto

  • @timothyvalcoure8890
    @timothyvalcoure8890 6 місяців тому

    Oh no get rid of the countdown at the beginning and start right into talking.

  • @desrios6837
    @desrios6837 13 днів тому

    Stick to the course and stop going off track with trash talking about dealers!!!!

  • @jims.3987
    @jims.3987 10 днів тому

    12 minutes and I have not discerned a single useful bit of information yet. No wonder tech's all suck these days.

    • @MasterAutomotiveTraining
      @MasterAutomotiveTraining  10 днів тому +1

      Techs suck these days because of the same mindset as you. I know it all, and I haven't learned or don't need to learn anything, because I'm the best and know it all. Good luck with microwave mentality and good luck to the people who work with you ,around you and who's cars you service, they are going to need it. By the way thanks for helping the algorithm.

  • @jims.3987
    @jims.3987 10 днів тому

    Why the fuck you talking about distributor caps and rotors. None of these kids will ever see a distributor rotor unless they are at a small shop that does classic cars.

    • @MasterAutomotiveTraining
      @MasterAutomotiveTraining  10 днів тому +1

      Lol, talking bad about a video 12 minutes, then an hour later, still watching, yet has to tell the world how special he is by posting yet another "I know it all and am the best" comment, thanks for helping the algo. Good luck with what ever it is you know or do.