General Electric Washing Machine Not Starting - The Motor
Вставка
- Опубліковано 6 жов 2024
- General Electric Washing Machine Not Starting - The Motor
Replacement parts amzn.to/3SSBGld - paypal.me/Ange...
Warning: Use the information in this video at your own risk
Great Video! Step by Step details and easy to understand. Good Job, I appreciate your help in this video!
Excellent tutorial!
Thank you!
Very well done.
I have a kenmore washer which runs for around 10 seconds and then trips. I noticed that the power cord gets hot. It spins when I need to drain the water and drains very well. Any idea?
Where is the capacitor for the original motor that was changed out as bad? Do those motors have their start/run capacitor internally?
Yes. Internal
Do you know how to test a different GE top load washer motor? I have 5 wires, orange, red, yellow, black, blue. it looks to be a pretty common motor
Sorry my friend i don't have that information
Very good
Do these instructions apply to the GE hydrowave washers? The wire colors don’t match. Thanks
No, the hydrowave washer is a different kind of washer
theapplianceman is it difficult to test the motor directly? I can’t seem to get my washer spin or agitate. Green light blinks 1 sec on and off (no codes), Lid switch tests ok via continuity test, no codes in service mode at the control panel, fusible link not blown, shifter coil tests ok via resistance, I replaced the motor with a known good used one, I checked for 120VAC at the motor side harness and that checks ok. I think I checked everything and it still does not work.
I also did a motor reset via lid opening and closing and nothing.
These machine are a piece of garbage You cant even try the motor like a regular dryer. I am sorry but I don't have much on that type of washer.
Check this link on youtube to see if there is something that mya help you.
ua-cam.com/users/results?search_query=DBVH512GF1ww
angel
My schematic has a capacitor at M7, and unless it is included in the test circuit the motor will not start and the test cable will not work.
Which wires to check for ground fault? I have a washer that trips my GFCI circuit but when plugged into a regular non gfci circuit it runs fine.
Sorry I don't know
Do a full cycle on your washers
How do I check get top loader washer motor for power ????model wjrr4170g1ww ,,,.I jumped door switch and pressurized the pressure switch and still nothing ???any help please
I jump the door switch but it just fill an drain
Por favor en Español
I have wsm2700dawww spacemaker washer and dryer and i need to connect it directly with 120 volt ac which wire i should connect to have agitate mode and spin mode. Help plz
Sorry I don't know anything about the spacemaker
Hello. Help please check the engine. GE 5KMC145YTA005S.
I can send photos. please write me where to send.
I have a kenmore washer which runs for around 10 seconds and then trips. I noticed that the power cord gets hot. It spins when I need to drain the water and drains very well. Any idea?