How To Clean A Suzuki Access Carburetor
Вставка
- Опубліковано 12 вер 2024
- How To Clean A Suzuki Access Carburetor.
📱Follow me on Facebook at / rysonsgarage
📱Follow me on Instagram at / rysonsgarage7
📱Follow me on Twitter at / ryson95883774
here is our carburetor so first you will have to remove these two bolts, then these two screws and then one more screw here which is there for the ring.
so first i will remove these two bolts which are connected to the engine.
then i will loosen the screw which is holding the ring.
after that you will have to push the rubber connection a little bit and pull out the carburetor, just keep this gasket in a safe place as you need it while putting everything back, here comes the carburetor out, you still have to leave three more connections, one is accelerator cable, then choke cable and petrol line.remove the petrol line and keep it on one side, now here i am removing the accelerator cable, by removing these two screws the accelerator cable will come out. now here comes out your accelerator cable just keep it on one side.
now you will have to remove the choke cable, and here comes out the choke cable.
so here is our carburetor which is completely separated from the bike so i will start to clean it now.
just take out some petrol from the motorcycle and take a paint brush and bush it outside first with petrol so that the dirt from out side will not go inside. clean the outside part of the carburetor really well and then we will open the carburetor after cleaning it with petrol just wipe it dry.
now here i am done cleaning the outside part of the carburetor, so you will have to take out these 4 screws which are holding the carburetor together.
you will have to put a clean paper and clean the carburetor on the paper so that the dirt from the floor will not go inside of the carburetor.
here i will start to remove all the four screws.
so here my carburetor is open now, all the parts which are taken out from the carburetor you will have to keep them in a safe place. just put petrol in a bowl and place all the dismantled parts in that bowl.
here you can see that how much dirt is accumulated over here inside of the carburetor like a layer, here i have taken out a pin from the carburetor, as i go on removing parts from the carburetor i will keep them on one side, here comes out the pipe and now i will remove the tuning screw.
like this one by one go on removing all the attachments and keep on one side safely, see that you don't loose any of the parts.
now here this part which is fallen out i will show you later from where it came out from, underneath of this part there should be a spring.
now we will remove this float by just pushing this small pin out and the float will come out easily.
here i am removing the choke assembly, just make it loose with a spanner,and here comes out my choke assembly.
as you can see here that i am taken out all of the parts from the carburetor and now i will start to clean them with petrol, all the parts which you have taken out from the carburetor you can now put in this bowl of petrol for soaking so that the dirt inside of the parts will become loose and will come out easily, here i am using a paint brush and cleaning all the parts, just clean all the parts nicely and see that there is no dirt left behind, you have opened it so much then clean it properly.
like this just put a few amount of petrol inside of this pipe so that all the dirt inside will come out, all the dirt inside will come out like this.
now all the small items which are there you will have to brush them one by one properly, there are small holes for these pins, you can just blow air inside of them and clear them, if you have a compressor then you can use that to blow air or you can blow air from your mouth.
now here i am done with cleaning everything and now i will replace my gloves and will start to assemble everything, i had told you that i would tell you later from where that part came from so here is where that part came from and underneath this part there is a spring, and then on top of that you will have to put this screw. now as and how you have removed all the part you will have to start to put them back. just put this pipe back and our carburetor fitting is done and we will now put it back on the bike, here i am attaching the choke cable, attach the choke cable first.
put that gasket back and slide the carburetor back in position, connect the float pipe, put screw for the ring and make it tight,
now put back the two bolts of the engine connection pipe,
connect the accelerator cable, and lastly you will have to connect the petrol tank pipe connection.
that's all in these video guys hoping that you liked my video if you have not subscribed to my channel then please subscribe and hit the bell icon to get notification of my latest video, till then bye and take care.
Bohot bohot shukriya.... Aap k video dk k hum mera 700rs save kr Lia.... Apnai se carborater pe ajj kaam Kia... Koi problem Nye hua
comment karnekeliye shukriya dost, suscribe or share kiya to meherbani hogi. phir milege.
@@rysonsgarage suzuki access 125 ka gearbox pe aisai ak detaild video banayea... Or saat me nut size explain kr k.. PLZZ....
Very good sir ji jankari bare par meri sutree Duhan bohot hai
Very much helpful vedeo for me,
God bless u always
Please always mention types of tools and their number etc so that common man like me can arrange all required tools before following your video practically. Thanks brother for this video. Alternatively, you can mention the tools in description section.
For further neatness in work I would advise u to plz use a plastic tray to put in all dirty parts and another tray for cleaned parts. Its also good to change all hardened pipes attached to the carb to reduce breakdown.
Meri access 125 old model he. Start karne mein bahut time lagta he aur race bhi high deni padti he. Mechanic said need to change carberetur. Is it carberetur or not. Please help. Awaiting ur reply. Thanks
before you change the carburetor check my suzuki access stalling video and see if that helps you out👉ua-cam.com/video/-otYiIg7DsE/v-deo.html
Thanks a lot the video was very helpful which has covered how to open, clean and fit all parts back, will try the same with my scooter
Bhai apki dukan kha he
Thank you rayson
You are most welcome
Bade bhai please acess125 Ac to dc kaise kare i mean jab headlight ac me hota hai usko dc kaise kare horn light ke liye and please full new wire install video banao
Accelator के पास में एक Casing में 2 wire वो कौन सी हैं, क्योंकि वो मेरी Access 125 में टुट गई हैं।
Carbureator के ऊपर जो accelator cable का Part hota hai...
Vo dono wires TPS sensor ke hai, TPS matlab "Throttle Response Sensor" wo nahi bi lagaye to bike chalegi, lakin apke pickup todha kam leghi bike, bohut hi chota difference hai, jab ap throttle kichte ho to vo apke carburetor se signal bejta hai.
@@rysonsgarage thank You..🙏
नमस्कार...मेरे पास यही गाडी है उसका आर पी एम सेट नही होता। कम ज्यादा होता है एक जगह सेट होना चाहिए लेकिन नही होता। तो उसे क्या इलाज करना होगा? क्योंकि दस साल हो गए है गाड़ी चला रहे है मगर कभीबी ऐसा प्रोब्लम नही आया। कार्बोरेटर ट्यून कैसे करे?
इस वीडियो को देखें ua-cam.com/video/-otYiIg7DsE/v-deo.html
Bhai access gadi ka rr unit ka video banao.meri gadi ki head light bahut dim h.kya rr unit ki problem h
apne head light ka glass check karo, zada se zada ye glass fade hoke light tik se bahar nahee kikalti, apka bulb be nikalke dusre koi bike pe dal ke dekh lo agar tik se zal raha hai ya nahee, nahee to bulb replace kar do.
I think there is no spring under needle jet (below main jet) as told in video
Osum video.....❤️🙏🙏🙏 Thank you
Most welcome 😊
Carburetor k parts ko 10-12 hours Thinner me rakhne se Ekdm New jaisa ho sakta hai ???
I am not very sure about it, I mostly hear that carb cleaner is good link here amzn.to/2XUvl9B
Okay
Nice video..
Meri access agar full accelerate karta hu toh fat fat awaz karke ekdum jhatke deti hein, par slow race ki toh 40 aram se pakad leti hein...ye bhi carburetor ka lafda hein kya bhai?
Check Access Stalling problem Video
Bhai mein jett ke niche spring rehti ya nahi rehti bhai please batado kaam rukha hua hai
spring rehta hai
watch video from 11:30, you can see that part,the spring is under that.
@@rysonsgarage bhai konsi spring choti wali ya
@@rysonsgarage o jo pipe jaisi rehti whole whole rehte o wali kya
ek choti spring rehti hai, agar vo nahi be dali to chalega, relax ho zao.
Dear sir, Air filter clean Karne ke bad Suzuki access 125 chalu nahi ho rahi ,Kya muje carborator tune karna pad3ga ,video share kare
Meri access 2014 model race slow fast problem he, carburettor change karna padega? Clean to 2/3 baar karvaya liya
Kya race hoke rehti hai? Automatic
Sujiki access 125 slow spid jam chalta h kya problem ho Sakta h
mai apka samja nahi, slow speed pe band padta hai?
Meri Suzuki access full accelerator pe chali jati hai bina lever gumaye. Accelerator cable bhi sahi hai. Mechanic bol raha hai ki carburettor change karna padega. 2500 rs. Ka kharcha hoga. Kuchh suzav dijiye. Suzuki access 125 2010 model.
kya apne tuning kiya? ye video dek ke tuning kar ke pehle deko ua-cam.com/video/BgMntTkkFdc/v-deo.html
hi bro. i am using suzuki access 2016 special edition. its not giving correct power while overtaking any vehicle some times. so give me a suggestion to rectify this problem.
did you check any with any other access how it overtakes?
MERI access me problem hori hai scooti race dene par race Hoti hai lekin thoda Jada race karne par Aage badti hai kya problem hai batae please..
Check your drive belt and clutch
Mera access carburetor clean karne ke basd race bahut zyaada ho gaya... Tuning karne ke baad bhi teek nahi ho raha... Please help
fuel mixing screw ko yek turn loose karo, main tuning screw loose karnese pehle. phir bhi nahee ho raha hai to check karo agar apka float apne sahi direction me dala hai to.
Are you from goa? Cz ur hindi little like goan
Yes
Mera access Scooty idling p rukh nahi raha h what's d problm ... carburetor clean kiya he tuning nahi ho ra h chalu honar acc nahi diya to band ho jati he
Check this video ua-cam.com/video/-otYiIg7DsE/v-deo.html
Bhai carburetor ka air SCREWS Q set kar kai nahi bataya or gadi start Q nahi kiya.
tuning video ua-cam.com/video/BgMntTkkFdc/v-deo.html
Sir Suzuki access ki carburetor tunning kitni rehti hai?
Aapka garage kaha par Hai?
dost, tuning karne ke liya apko gadi chalu rake karna padega, bike ka ek round lelo 5 minute ka taki apka engine garam ho jaye,bad me apko tuning screw ko tight karna padega, ise apka tuning high hoga, phir aista apko tuning screw loose karte jana hai tab tak jab tak apki bike kam se kam rpm per chalu rehegi,zada loose kiya to apki bike band ho jayegi, or zada tight kiya to gadi zada race karegi,apko tuning screw bich me rakna hai.
mere facebook page pe jayo maine tuning screw knosa hai vo photo dala hai
link description box me mil zayega
Thanks bhai
Access की बोडी केसे खोल तेहे
वह बताव भाय
Milage problem aa rahi hai muze access 125 special edition 2015 model.. mechanic says there is problem with carburetor. What do u suggest ? Do i need to change whole carburetor or any part of it
apko koi riding problems aa rahe hai mileage ke ilava?
@@rysonsgarage nahi baki koi problem nahi aa rahi hai.. ekdum achhi smooth chalti hai sirf mileage ka problem hai.. maine aapke diaphragm wale video pe bhi comment kiya hai.. bcoz u said diaphragm me issue hota hai to petrol jyada jata hai carburetor me.. ye bhi ek reason ho sakta hai na ?
Sir old Access ko New Access ka carburetor OR air filter set ho sakta hai kya
Excellent
Thank you so much 😀
Brother,
video time at 5.19 you said
"abhi a part nikhale hi,
o kedar se nikhalega o may ape may bade may batadenga hi .
isaka neeche ek spring be Rehata hi,"
Please explain in english.
When I open carburetor a small spring (4rounds spring) fall down from carburator.
i didn't find where it is fallen from.please reply brother.
Should be the one under the fuel mixing screw.
Brother,
Thank you for reply.
But when I kept the spring in that it is not setting properly.half of the spring looks out side.and also difficult to tighten the screw on that spring.but in the video you are fitting very easily.
put the spring on to the fuel mixing screw and then put the screw inside, the fuel mixing screw is the one which is next to the tuning screw, outside of the carburetor. there are two main springs, one for tuning screw and one for fuel mixer screw. on the video I failed to show that. join my facebook, group link will be in the description and send me the photo of the spring after which I will be able to direct you better.
Brother,
I did it.
Thank you soon much.
I like all your videos.
Tq.....
Air fuel mixture screw how many turns has to be opened
take half to 1 turn max, check for smoothness after adjusting, if not smooth then open a little bit more, but start with half turn.
Access 125 ka carpenter Khol sakte hain ya nahin bhai batao
Hi Ryson, I have a problem with my access 125 carburetor version same as yours.
4 weeks ago I dismantled carb and cleaned it as instructed in the video. After installation the vehicle was normal until 3 weeks. Last week, I stopped to fuel and later while riding there was sudden power loss and the scooter came to a rolling stop. The engine needed to be fully accelerated to keep it running. If I let go, it would stall. Also the RPM was not increasing even after applying choke. I thought the belt might have snapped and pushed the vehicle to nearby mechanic. He looked at the issue and told me it was not the belt and opened the seat to check inside. He opened the airbox cover and suddenly the bike behaves normally. He put the cover back on and the same power loss. He removed air filter and just placed the plastic cover and that's how I made back home. The thing is my air filter is new. It is white and from "Suzuki original parts: which I replaced when I cleaned the carb 4 weeks ago. Now my bike refuses to start with air filter on. It only works without it. And also it doesn't idle. If I let go of throttle it stalls the next second. The choke is also non responsive (acceleration doesn't increase or decrease). I inspected accelerator cable, choke cable and throttle spring; all of them are in good condition. I can't find the issue. Even fuel diaphragm is new so no issue with fuel as well. The problem is somewhere between carb and air box. The bike cannot accelerate with new filter. Could you help me out with this issue?
Was it raining when you faced this problem? Or was there water on the road?
@@rysonsgarage No, it was a dry day and I didn't ride in puddle as well. I earlier has the issue with water entering air box and my jugaad was sticking duct tape around airbox seam. so last year I never had problem with water entering after sticking the tape. This time, the power loss was sudden with no apparent reason. The air filter is new and worked well for last 3 weeks but now the bike doesn't like it. It wants to intake air without a filter.
Did you check if all the vacuum pipes are connected properly? Sometimes the pipe connected to the engine head comes out, giving this type of issues, check all pipes.
@@rysonsgarage Yes, vacuum pipes, fuel pipes, air pipes are all visually intact. Second checks performed by removing and reconnecting once again. Still the outcome is same (runs without air filter)
I must also add this. while the bike is running without air filter, the exhaust gases have petrol smell and has a slight black smoke
Tell me how to make tuning setting
you will have to keep your bike started and do the tuning, before you do the tuning take a round of 5 minutes so that the engine warms up, never do tuning on a cold engine, then you will have to tighten your tuning screw to the fullest this will make the tuning high, after that slowly you will have to loosen the tuning screw till your bike idles at the lowest RPM, if you loosen it too much then your bike will shut off, and if you tighten it too much your bike will race too much, so you will have to find the sweet spot for you.
check my Facebook page for tuning screw location, link will be in the description.
Engen me kahi likeg nahi hai bloc pistan naya hai hed ke val valsil bhi sab naya hai
Fir bhi oil 2 3 hafte me kam
Hota hai
air filter check karo, kabi kabhi leak hoke filter me ja sakta hai
How to replace old suzuki Access passanger footrest
bro can old Suzuki access 125 be fitted with new Suzuki access 125 carburetor.
I have not tried that bro, but I feel that you should put the same type of carburetor because that carburetor is designed for that engine. If you are not getting the part then it is a different case.
Bhai apne jo wire choda hai last me uska bare batao plz
kya problem de rahi hai gadhi?
Ye karne se milega kitna improve hoga abi meri scooty 30km deri hai
Engen oil kam ku hota hai
bohut reason hai oil kam honeka, ek to apke engine oil drain honeka bolt loose honeke karan leak ho sakta hai, dusra apke head gasket me leakage hai to oil kam ho sakta hai, silencer me se kaisa dua nikalta hai vo dehko,agar dark blue dua nikal raha hai to apka engine wear ho gaya hai.agar thoda oil kam hua hai to vo normal hai,lekin zaida oil kam hua to apki gadi kaisa dua chod rahi hai vo dekho.
Bhai corburetor ko 2 wire q hota hai meri gadi bahot problem de rahi hai
Vo dono wires TPS sensor ke hai, TPS matlab "Throttle Response Sensor" wo nahi bi lagaye to bike chalegi, lakin apke pickup todha kam leghi bike, bohut hi chota difference hai, jab ap throttle kichte ho to vo apke carburetor se signal bejta hai.
sir pistan daalne k baad scooti ko kitni der chalu rakhna padta hy
Bro what is the price of the activa carburettor gasket??
50-100Rs
Sir old access is stop engine after running 2to3 km and after 4to5 hour it will start what's the problem please can u guide me
watch this video and see if it can help you ua-cam.com/video/-otYiIg7DsE/v-deo.html
Can even check if hole in petrol tank cap is opening. As per video of Safety Mechanic UA-cam channel.
Kaha rahatahe sring
inside of fuel mixing screw
Sir meri access 125 choke lagane pe he chalti hai kya problem ho sakti hai pls bata do
Mene bhut dikhayea lekin problem solved nhi hui bhut missing karti hai or choke lagane pe bhut achi chalti hai
kya apne naya air filter dal diya hai?, carburetor ko saf kiya hai?, oil aur oil filter replace kar diya hai? agar ye sab cheeze apne kar diye hai to ye video dekiya aur zo bhi me bata raha hu video me vo karke deke, thanks. video link ua-cam.com/video/-otYiIg7DsE/v-deo.html
Clean pilot jet using copper wires
Sir where can buy the carburetor for 125 access and how much is price
you will get in the showroom, I have never bought it so don't know the price,do let me know how much it cost if you bought one.
Red wala pipe kya he..uska kya kam hota he...pl reply urgent..
Air pressure inside float chamber made to atmospheric pressure
Where is your garage located?
Averege kitna deti h old acsess
25
shar muge bike engine bare me kon see bare me problem aati he ora keese sola karate he
sir mein aapka sawaal kuch samjha nahin
सर एकसेज सुजूकी वायबल करती त्यावर काय करायच सागा बेरीग बदली तरी तेच होतय बोला सर
फिउल गेज दाखवत नाही त्यावर काय करायच बोला सर
wire tik se connect kiya hai to check karo.
Kya dikkat hoti hai
Mera gaadi reserve pe hi sahi se chal raha h.... reserve ke upar petrol rehtaa h to missing hota h gaadi
Check your fuel diaphragm
Where is it??? And ye video me chota screw kaha jaata h ...nahi samjha
Assembled!!! Thanks Alot !!! Subscribed.!
Ek mechanic se maine pucha tha vah Kah Raha Tha Access 125 2010 model Kaka carpenter Khol Denge to Fir Kabhi gadi Chalegi Nahin vah mechanic Mujhe bata raha tha ki usmein ek chij rahti hai vah Ud Jaati Hai To fir kar Pata Lagane ke bad bhi gadi Nahin start Hogi
kyo nahee kol sakte bhai? mera video dek ke bohut zan ne carburetor clean kiya hai, ap comments check kar sakte ho,zaise maine kiya utna hi karo, zada kuch mat kolna, dusri bat to ye hai ki apne leakage kidar hai vo dekha? kisi ne carburetor clean kiya tha in dino? agar apke carburetor ke under jo float hai vo agar ulta dale ya atak zaye to apka petrol sab katam ho zayega apne ap, to pehle check karo kider se petro leak hota hai vo.
Meri suzuki access 125mein 7-8km. Ke baad engine bahut heatup ho jata hai aur jhatke lete huye gadi band ho jaati hai, fir thodi der baad engine cool hone par hi start hoti hai
Kya problem ho sakti hai
Please help
Apne aap Khade Khade petrol bhi Pai jaati hai aur average bhi bahut kam Deti Hai
Sr carburettor clean krna ka baddd start nhi ho rahi please batooo
agar apne sab parts tik se dale hai to, pehle apka tuning screw zada tight kiya hai to usko toda loose karo, choke deke dekho, first time kick se start karo.
Access Scooty start Nahin ho rahi Chhe mahine se khadi hai current bhi a raha hai sab Kuchh a raha hai sab Kuchh kar liya start hokar band ho ja rahi hai iska nukta batao
check out my suzuki access stalling problem solved video, may be it can help you.
Yesterday i did my bick support your UA-cam, too good
Hello sir meri scooter Suzuki access old model ha us ma carburettor me jo plastic ki ati ha vo Tut chuki hai to hamare yaha ye nhi miltiha to yese kese thik kare😂😂
😂😂😂
boodmo online site par try karo
Kya kiye kuch samjh me nhi aya bhai
kya hogaya dost? video dekho 11 minute 30 seconds se, jo part me udar dika raha hu uske niche vo spring rehta hai.
facbook group pe zao or photo post karo udar se me bolta hu kya karna hai
kya apki spring goom ho gayi hai?
@@rysonsgarage bhai hogaya problem solve jo spring mai pehle daal tha o spring mileage ke screw ki thi
पेट्रोल कॉक नया डाल के पेट्रोल नही आ रहा
सभी पाइप ठीक से कनेक्ट करें
Abhi tak Gari state Nava 125 Suzuki Scooty iska problem kya hai bataiye to
மகிழ்ச்சி
மிக்க நன்றி
Carboreter mein red wala pipe kya kam karta hai
Air pressure inside float made same as atmospheric pressure. Put petrol through it and see while disassembling.
🌹
Eak part ke bareme nahi bole
Time dekho 05:19 ka
Carburetor ical auto care problem deta hai
Accelat cable ke stah 2 pin ka ek wire dekh raha hai use aapne khi pe v connected nhi kiya last ms
I think it is throttle position sensor. Made no difference on my Access.
Caboretar chang atya
How often need to clean carburator
Not so often, only if you feel that it is a carburetor problem you will have to clean it, your bike will lose power when you accelerate and will tend to turn off, that is the time you know your carburetor needs to be cleaned.
@@rysonsgarage thanks for your information
Access 125 2010 model is model ki meri gadi hai apne aap Khade Khade Tel Pai Jaati Hai isko Kaise Sahi Karen bhai average Bhi Nahin Deti Hai 9 10 ka average Deti Hai so rupaye ka petrol dalit Hain Jaise Aaj Chalein petrol cal apne aap kam ho jata hai 4 se 5 Din Khadi karne gadi aur apne aap pura Patrol Sukh jata hai bhai
8
Address kya hai
Rt
Please bhai batado kaise Sahi Karen bhai please please bhai ek bar call karke mujhe bata do kya dikkat hai
Acess 125 bs 4 ka karbureter karab ho gaya he naya lagana padega kay
Kaise2 dala woh dikhao dobara
Bhai meri gadi race chodne par band hoti aur start karne par bhahut awaj karti hai jaldi start bhi nahi hoti jurur comment karta
Like
Number
Bhai mujhe call kar lo yaar
Please bhai call kar lo yaar
Bhai call per bata do please
Your voice is not clear