Casting Silver Cola Cap At Home WITH POTATO - Will It Work?
Вставка
- Опубліковано 15 чер 2020
- Casting at home- is it really easy? What do you really need for it to get a good result? In this long educational video I will try to get the result by minimum equipment. I will experiment as a beginner would do- trying, failing, improving the process, again and again.
My conclusion is casting without special preparation is an option of luck. To get more or less guaranteed result you have to know the technology and follow all the process steps with no rush.
There are always some improvisation at hand work but also some discipline you have to do.
I am very interested in your opinions this week!
We had this video narrated. Tell me what do you think?
Thank you for your feedback and see you next week!
Visit my shop- big sale now!
bonnfactory.ru/
Please check out my other work:
Mini Cannon From Pencils - Super Easy!:
• Mini Cannon From Penci...
Turned a Coin Into Pretty Origami Bird Pin Without Leaving My Flat:
• Folded Coin Into Prett...
Original video in Russian: • Ювелирное литье в дома...
web: bonnfactory.ru/?lang=en
instagram: / bonnjewelry
etsy: www.etsy.com/shop/BonnFactory
email: ad@bonnfactory.ru - Навчання та стиль
if you liked the product, then you can purchase it! bonnfactory.ru/product/bonn-cola
We are working on it! As of now conversion happens only at payment. Sorry for that
Oh my! Did you ever bring back memories from some 30 years ago! I, myself began my goldsmithing career by building a small kiln large enough to fit a small crucible. The book I was working out of said the investment should be about the consistency of sour cream....so, I bought a small tub of sour cream, dumped it in a bowl, and stuck my bare hands in it to memorize the consistency. I will say it worked. I put my casting project together; put it in my little homemade kiln, dumped some silver on top of the flask, and melted it with an acetylene torch. The method I used to force the silver into the mold was a big, raw potato, cut in half and smacked it on top of the crucible. A few minutes later I pulled out my first successful cast. The principle being the potato is 90% water and suddenly converted to steam and forcing the molten silver into the mold. Just thought I'd share a memory that brought a smile to me. Cheers!
P.S.- I also do a little voice-over work: You did a nice job with the narration.
this is better than the previous time you narrated a video but the silent videos have a certain charm to them
either way good video
Thanks for your feedback!
@@bonn3790 yeah man I understand why u did narration bcoz there's alot to understand here but I like your old video style too.. There's so much to casting its hard to do all in one video but you did Well, I need to start tryin to make my own moulds too it's very cool
The narration was really good, and it gives your videos a higher quality. Still the normal ones have a special charm on it.
So, the narrated videos are "better" in my opinion
Eu concordo
That was a really awesome custom pendant, very unique idea. Also the narration was a nice addition, I love hearing the process and what you use for it.
this looks amazing and I very much like the voiceover in the video
From an accessibility standpoint, the narration is great! It explains the steps and why each step is done, and those with visual disabilities can enjoy your videos as well.
The patience on this man
I like Bonn videos! Very nice! It shows the process, a more realistic experimentation. It encourages the creative process. And shows good close-ups. Thank you!
Eres un artista compañero te felicito !!nunca algo tan simple y banal como una tapita cobro tanta importancia te admiro !!!❤️❤️👏👏👏
I LOVED the voiceover! It was so nice to get information on what was happening onscreen! Awesome project!
That was a revelation. I will never have your patience but man was it great to watch. I thought I was an artist when recently I made a necklace from a Corona Extra bottle cap [I pick things up off the street], skull beads and a length of string. Actually, not every artist has to be a master. I'll be a putterer and we'll both be artists. :)
The narration is great! please continue!
Commentary is far better, nice to have explanations to support my personal lack experience in casting. You’re a great finisher also.
I love how persistent and patient you are. I admire you ❤ and naturally your works are all fantastic and beautiful 😍
First time visiting your channel, and I was definitely intrigued. I love the video style of voice over... Hope you make more.
Always Bonn-Cola. That was a LOT of work but I bet it was a learning experience. Looks great Bonn.
You have so much patience it’s amazing
love the commentary on the video, it's a nice video I have not eve seen someone attempt to cast this way. keep it up.
imagine finding a coke cap at your friends house or something, and its a frikkin skull emerging on the inside
...and the Coke cap is one Troy Oz of silver. 🤩😎🥳
this looks amazing and I very much like the voiceover in the video
Very cool video! & I do appreciate the narrative!
so cool!:) really like watching your videos. Your explanation of the process is really good and I would love to watch more videos like that... as long as you still keep the working sequences with amazing music:) much love
Thanks!
I'm enjoying the narration and the skills used
This is awesome!!
Amazing creation, and the commentary was top notch. Although I also really like your more contemplative videos without any talking and simply the music.
Thanks for your feedback, buddy
I'm torn between narration and no narration
I like the sounds of the tools and music like the normal videos but the narration helps me understand what's going on
Great video. God bless you and yours.
This turned out great. I like that you didnt edit out your set backs. Keep up the great work.
I'm a fan of both narrated and just background music.
Which is a rare find on UA-cam. I agree with you
I so wished I could do what you are doing? But I don’t know where to start with equipment or investment or the silicone you make it look so easy. Right now I’m just doing sand casting anyway I am enjoying your videos. I just found you today. Thanks , Autumn Michelle
I forgot to tell you I am also a silversmith instructor. Thank you for sharing your videos.
Very much like the narration.
Love the work i would buy it without questions !!!!
Gorgeous!
This is super good information, it's good to see the process, the narration was very helpful, and it was chill. And I have been wanting to cast and I don't have any fancy equipment so potato and hot nail for wax work sounds good to me. I would dig more full process / narration on top of whatever you already enjoy doing.
I'm on the fence about the narration. Leaning towards no narration. I like just music and the sound of the tools. Plus, I don't watch these because I'm gonna recreate them, I just wanna watch things get made. But that's just me
Excellent and very clever thank you ✊✊✊✊✊
i appreciate hearing your methodology in the narration. If you don't have a spoken narration in the future, for whatever reason, i'm sure many would appreciate written narrations or captions
Dude you're so talented.. 👌
NArration is cool, and I am intrigued about the potatoes. I think one could get rubber in a domestic situation...I like that pen derived chisel, good idea...good experiment, not a bad outcome
Bro, for a better result at this step 03:30 just put your mold in hot water for a while (70-80° if your silicon is okay for this temperature. if not, just immediatly buy some, because it is very useful), then you can cast your parafin in the thin parts much much easier ;-)
At model-mould making class for bronze casting (similar), we needed to warm the mould before pouring the molten metal. You should have more success with a warmed-up mould. Great decoration too.
The skull-bottle-cap combo seems very Goonies-like.
I have had some lapidary training in NC but will be the 1st to tell you , I suck at casting. With that in mind, have you tried cintrifical casting? The students with the best looking projects would really heat up the silver and cast into branches. Groups of 6 to 8 unless the pieces were really big. My girl Sandi liked to shoot 4 oz branches, she said the bulk metal helped keep the metal fluid all the way in the mold pushing the bubbles out.Loved the video, hope to see a bunch more.
Perfect narration and nice voice
Trilha sonora incrível
Trial and error are the catalyst for creativity.
The narration is great!
Nice job, well done. Looks cool.
The finished piece is very beautiful. I doubt it is possible (even for a casting factory) to cast such a thin Coca-Cola bottle cap. It is simply way too thin. After you did all those modifications all went well. :) Hand casting is very interesting but it is very limited. This is why we have so much technology these days.
Amazing. This is awesome
I love your idees. One tip. When you bring the liquid silber into the form.....you must have a second canal that the air comes out. So you have not bubbles.
Awesome what a brilliant idea good job kept it up
Friend, if you allow me a suggestion, in a similar video I saw how it was done well, you need centrifugal force for the metal to enter the mold correctly. In addition, the conduits must be a little wider allowing the entrance of the molten metal, sorry if I offend you for commenting.
Amazing😍 love it ❤️
wow this is really nice idea.
More narration. Great job!
Great vid, a couple of things you can try. I made a lot of silver and turquoise jewelry up in Washington State. I used cuttle fish bone to cast in , also try using bigger spruces to drain and to pour your silver in. Nick
I like the voice-over 😊
I cant say what it does to the library life of the mold, but I found it helped putting the mold in the microwave before injecting the wax - get the mold hot
The narration works well better spoken than my own voice .But so does the silent works for me too..Фантастический и коллекционный кулон and on sale too. for some reason I am thinking of the back of a motorcycle helmet with the skull coming out to tell the car driver to back off and give some road respect..
So if I got it right, the steam from the potato or the paper towel was supposed to push the molten metal down into to mold, right?
What if instead you were to use a narrower diameter mold with a metal/glass syringe that fits the mold and created some pressure with it?
Very good job, I enjoyed watching it, keep going💪🏻👍🏻👌🏻
Very nice video, also the others you did! Thank you for sharing!
Cut some vent holes in the silicone molds, that makes castin much more easy. I think that's the reason why your first trys doesn't work.
Awesome video
amaising wow .good job
I like the ones that failed. So cool and pirate like! 🏴☠️
Use talcon powder/ baby powder from keep both ends of rubber from sticking to each other. I've made hundreds of rubber molds. I've learned the right way for my mentor. Put the powder in a sock and tap the rubber on both side of rubber. It won't stick. Use some tiny screw caps to line up your mold. And mark the sides of the rubber. To make sure your molds are always facing the right way. I use different colors of rubber for different parts. White, black, and green. That way I don't have to search through all my molds. Thanks for sharing.
Not a big fan of the narration, but I love the video!
I made a centrifuge casting machine out of a bike wheel
And a vibrating table out of an old drill with a hockey puck fastened off center to it.and 4 springs plus a few bits of junk
cool idea! I think I missed the part at 24:32 that described how and what worked to produce the excellent casting, since until that point every thing failed. I would also invest in a wax injector and some clamps to hold the two mold parts together.
24:32 is the last second of the video…
the guy narrating sounds great bet he’s cute too
Watch his Blades of Chaos
He appears in that video
Hope you have a safe and great future
I literally use just a normal silicone for casting epoxy and it works xd
Nice👍
Do you think casting in delft clay would have worked better than lost wax plaster casting?
Like pela persistencia
Young master
Amazing work !
Where do you find such a syringe ?
Just a suggestion. Hand engrave the metal cap with the logo that is already there. Cast the skull. Silver solder the skull to the cap.
The background music he's using kind of reminds me Dave Mathews Band
Craftsman!!
super videos
this focus is hard to look >.< great job
👏👏👏
Looks like the gears of war logo at 7:30
What is the casting compound you use
what kind of silicon are you using for this project ?
Lost wax casting, expensive but effective.
This narrator is really good, any idea who he is?
用高速旋轉離心鋳造法製成率最高成品最完美
Your nice 👍
Edd would love this video
U are totally crazy 👍🏼
tutorialnya bagus.
The narration was really good narrated videos are better in my opinion, so we can understend all the spets better
I think it looks very rough in a very Good way, the thing looks like it was dug up from a old dig and thus is what was found 😁
Fraco sem habilidade
I don't like the way you melted the wax, I used to make candles and found out through research that if wax gets too hot it can reach flash point and explode.
The best way to safely melt wax is with a double boiler, one pot or saucepan inside anther with the outer pan holding boiling water, do not fill this pan , but put more in as needed.
When I was melting wax I was using 5 kilo / 11 pound blocks each time.
I do like the video, cheers.
Why not use an over flow at the low point on the mold to improve filling?
直接机雕一个它不香吗
🤩🤘 🤯