{EBAY} They Are Cheap But Are They WORTH it!?!?

Поділитися
Вставка
  • Опубліковано 5 січ 2023
  • Well I took the gamble! Money is tight and project needs to get done so I decided to go with an eBay Standalone wiring harness. For two reasons actually. 1. Save time of learning how to break down my own and 2. SAVE MONEY! So far its been fine? Couple of Plugs are different than what I have?!? And maybe wires not the color the directions say they are, but other than that its goin...ok.
    {EBAY} They Are Cheap But Are They WORTH it!?!?
    Removable Doghouse I Made
    • You Won't BELIEVE what...
    Gauge Cluster Install
    • SHOCKED I could make t...
    Truck Cab Removal
    • Cab removal of Chevy 2...
    Drop Me a line at SimonSaysGarage@Gmail.com
    Facebook
    / simon.says.g. .
    Instagram
    / simon_says_gara. .
    TikTok
    vm.tiktok.com/ZTdPdkSDv/
    #Gasser #Ratrod #Vegasratrods #LOUD #4x4 #4x4cars #ls #lsswap #chevybelair
  • Авто та транспорт

КОМЕНТАРІ • 20

  • @bitsnpieces77
    @bitsnpieces77 Рік тому

    Coming along great 👍

  • @shaneharford1198
    @shaneharford1198 Рік тому

    Looking sharp mate

  • @theace155
    @theace155 Рік тому

    Have a full label list of the underdash wires? mine came without instructions

    • @Simon_Says_Garage
      @Simon_Says_Garage  Рік тому

      I have what it gave me but was off on a couple colors but figured it out.

  • @stevepope5484
    @stevepope5484 10 місяців тому

    Are u gunna use the truck GAUGES?
    Whats the master cylinder from.

    • @Simon_Says_Garage
      @Simon_Says_Garage  10 місяців тому

      Yes I used the stock gauges a and factory master cylinder and pedal assembly

  • @anrtard9452
    @anrtard9452 8 місяців тому

    Did you pin out the plugs on the blue side of pcm

  • @tookapocalypserising4892
    @tookapocalypserising4892 2 місяці тому

    How’d this build come along?

    • @Simon_Says_Garage
      @Simon_Says_Garage  2 місяці тому +1

      I have a entire Playlist if you are interested ua-cam.com/play/PL1RtGTTZEobWcvbSkHENP9kjdkrq-GrWq.html&si=1T5NnOcwxPu5xb8V

  • @shadymaint1
    @shadymaint1 4 місяці тому

    I'm using the factory harness from my donor for my swap.

    • @Simon_Says_Garage
      @Simon_Says_Garage  4 місяці тому +1

      Knowing what I know now. I probably would have done the same.

    • @metrokustomz5816
      @metrokustomz5816 Місяць тому

      Did you pull the wires you didn’t need ? I think I may use my factory one myself and just de pin the ones I don’t use

    • @shadymaint1
      @shadymaint1 Місяць тому +1

      @metrokustomz5816 very little modifications to the factory harness. The plugs I'm not useing just get zip tied out of the way.

    • @metrokustomz5816
      @metrokustomz5816 Місяць тому

      @@shadymaint1 so you think it’s better to use the factory harness and just weave out the wires you don’t need ? Instead of paying for a new one ?
      Thanks for the response to sir

    • @shadymaint1
      @shadymaint1 Місяць тому

      @metrokustomz5816 I'm cheap and the factory harness was free with my donor. I also used the under hood fuse block.

  • @gerardgeter6750
    @gerardgeter6750 Рік тому

    Part # ?

    • @Simon_Says_Garage
      @Simon_Says_Garage  Рік тому

      Sure here’s the one I purchased www.ebay.com/itm/324104459601?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Gz8KZOhSRFu&sssrc=2349624&ssuid=vXE85biJSJi&var=&widget_ver=artemis&media=COPY