🔥 How to make PLADUR curtain 💡 3 IDEAS 👉 DRYWALL

In this video I will show you 3 ideas on how to make a plasterboard curtain.
Here you can get ideas and tricks to do it in the best way and even get your own technique.
🔥 How to Mount PLADUR Partition Over Window ✅ (Waterproof Plate) Drywall 👉https: // • 🔥 Cómo Montar Tabica d...
✅ If you are going to do some work for PLADUR, and you are going to choose to hire a company to do it, I have created a short guide to help you analyze the budget and avoid common deceptions in the sector.
Head over to www.tutorialcre... to download it.
In this case the materials we will use are:
- Profile U.
- Profile f47.
- Edge angle.
-Channel 48.
- 12.5mm waterproof plasterboard plate.
-Plateboard plate 12.mm.
- 5mm plastic dowels: amzn.to/3eAevaV
- 4x35 screws: amzn.to/3xPaWVS
- Screws MM.
- 25 screws for plasterboard: amzn.to/3hOzoB4
Tools we usually use:
- One level: amzn.to/3BgU8cD
- A pencil: amzn.to/3rmnLVu
- One metro: amzn.to/3etCB7h
- A cutter: amzn.to/2VS7xrb
- A pencil: amzn.to/3zbzI2P
- A drill: amzn.to/36IMtFJ
- Drill of 5: amzn.to/3eRsU2P
- A screwdriver: amzn.to/3exW4nm
Video transcript:
Let's go with 3 montage ideas for curtain rod.
We mark the height at which we are going to place the background.
We screw the U by the line that we marked.
We cut some strips of plasterboard to the size we want for the hole in the curtain rod.
We screw the plates to the U.
We take an f47 profile and screw it so that it is in line with the plate.
We mark the height at which we are going to place the grid for the ceiling.
To cut the strips of plasterboard for the partition, we measure from the bottom of the curtain rod to the height of the ceiling and we give it 4 cm more.
In this case, since I am 14cm, I will cut them to 18cm.
We mark on the plates the measurement we had from the bottom of the curtain rod to the height of the ceiling. In this case 14cm.
Screw the plates so that the line we mark is aligned with the bottom of the curtain rod.
Are you liking the video?
I don't say anything. Subscribe
We take a U and screw it into the lower part of the partition.
We cut some pieces of channel to fix the curtain at the height of the ceiling.
We fix them to the slab and place them at a distance of 90cm from one to the other.
We check that we are at the height of the laser and screw.
First idea ready.
In this step we do the same: we mark the height and screw the U.
Do you want to know how to make this partition? I leave the link in the description.
In this case we will make a curtain rod with a 24cm gap. But we will cut the plasterboard strips 5cm wider, we will make them 29cm.
We screw the strips to the U.
We take some pieces of profile f47 and screw them.
Between one piece and another we leave a separation of about 80cm.
Here we have the height of the roof grid. We measure from the bottom of the curtain to the height of the ceiling.
We cut the strips of plasterboard.
Now we screw a U that will be the one with which we will fix the partition to the bottom of the curtain rod.
We screw another U on the other side that will be to hold the ceiling later.
We mark a line to screw the tabs.
In this case they have different heights because the ceiling will have two heights.
We screw in the area where we put the f47 pieces for a better grip.
With some pieces of channel or U, we make some pieces to fix the curtain rod to the slab.
We check that it is at the height and screw.
We pass a string to put the partition well in line.
With some pieces of U we will fix the partition.
Second idea ready.