Howdy Mr Master ! That is about the hardest metal I have ever seen you pound by hand & barely able to get it started , it looked like it took a lot of effort to straighten out the twist in that drill bit ! And i was surprised to see that you didn’t use more of the knife blank , when you drew the knife pattern on it ( 3:52 ) only because of the extreme effort use by your huge mechanical stamping press! Your videos are never boring , even the large handheld grinder seemed to labor, at cutting that drill metal ! That’s a very impressive , WICKED knife & SHARP ! Keep on pounding & I’ll keep watching !
Looks good, but I have some concerns about this particular tool; The first is the cold shut I saw near the handle, which occured when the larger part of the old drill was flattened... In my mind, the cold shuts on both sides resemble cracks due to how the material flowed over the thinner material and failed to forge weld and as such, could be considered weak spots The second is an old pet hate of mine, I have never been a fan of rat tail tangs and this style is my least favorite due to their being a major weak point on any kind of blade, and I've seen too many break for me to ever trust them... The last is more a longevity issue... I didn't see any tempering, so I have my doubts as to whether it could ever hold an edge... I DID like the idea of using epoxy putty as the handle, though it could have done with a little more work to fill in the gaps. Overall opinion: As an ornament? I would give it 7 out of 10 due to how the handle needed a little more work to finish, and the cold shuts I mentioned above. As a proper tool? I would give it 2 out of 10. The comment about the handle and cold shuts account for losing three of those points, the rest are due to that tang being too dangerous for it to be anything more than an ornament and how the steel wasn't hardened or tempered.
Un " adorno" de pared,si es que te gusta la estética.¿ No hace falta templar ni normalizar la hoja? ¿ Esa empuñadura,con espiga débil,y masilla,es operativa? En fin,el " Parto de los montes"( Del que salió un ratoncito)😂
Beautiful work. Just curious, but we're are you from?. Do you sell the knives you make and if so is there a website I can go to to look at your knives. Curious from USA.
@@stevenbaker43you are aware that it does not matter, right? It is for show. Hell little man, if they can take out an enemy with a rock I am positive this would work too so your argue,ent is still moot
Не знаю, как гугл переводчик переведёт слово говно, но это и есть💩. Там такой кусок охеренной стали, быстрореза, что меч - кладенец можно было сделать. Жалко сверла, поди советское...
That was made so cheap. The craftsmanship was so bad. That piece of iron should be put in the trash. I was told " it takes less time to do something right the first time, than to explain why you didn't". I wouldn't be proud of that knife. You have the tools to make something really special. And yet you make trash. So very sad.
Может быть я что то не понимаю, но испортить хороший инструмент для получения какого то нефункионального непонятного говна - это не показатель присутствия большого ума. Жалко сверла.
Howdy Mr Master ! That is about the hardest metal I have ever seen you pound by hand & barely able to get it started , it looked like it took a lot of effort to straighten out the twist in that drill bit ! And i was surprised to see that you didn’t use more of the knife blank , when you drew the knife pattern on it ( 3:52 ) only because of the extreme effort use by your huge mechanical stamping press!
Your videos are never boring , even the large handheld grinder seemed to labor, at cutting that drill metal ! That’s a very impressive , WICKED knife & SHARP ! Keep on pounding & I’ll keep watching !
Someone get this man a set of safety glasses lol
Nice creative one wit this knife and again like I said again quiet and hand work is what good about you man, you cold as hell man 💪🔥💯👍
Я не понимаю, почему не был сразу откован нормальный длинный хвостовик у лезвия???
Monster, Man.... Monster.... Perfect
Úžasný překlady. To je něco.
Wonderful.
In the early video he looks like the kids playing their chewwing gum
Very good craftsman. may you also show the young people to learn. let the art not be forgotten
Nice work as always
Badass knife, nice job!
Great art Work, really nice knife
Really enjoy watching you make these knifes!
Looks good, but I have some concerns about this particular tool;
The first is the cold shut I saw near the handle, which occured when the larger part of the old drill was flattened...
In my mind, the cold shuts on both sides resemble cracks due to how the material flowed over the thinner material and failed to forge weld and as such, could be considered weak spots
The second is an old pet hate of mine, I have never been a fan of rat tail tangs and this style is my least favorite due to their being a major weak point on any kind of blade, and I've seen too many break for me to ever trust them...
The last is more a longevity issue... I didn't see any tempering, so I have my doubts as to whether it could ever hold an edge...
I DID like the idea of using epoxy putty as the handle, though it could have done with a little more work to fill in the gaps.
Overall opinion:
As an ornament? I would give it 7 out of 10 due to how the handle needed a little more work to finish, and the cold shuts I mentioned above.
As a proper tool? I would give it 2 out of 10. The comment about the handle and cold shuts account for losing three of those points, the rest are due to that tang being too dangerous for it to be anything more than an ornament and how the steel wasn't hardened or tempered.
He heat treats and tempers. Just boring to watch...
@@jimmybzjamn fair enough, only stated what I did from what I saw, hence my comment about tempering etc
Un " adorno" de pared,si es que te gusta la estética.¿ No hace falta templar ni normalizar la hoja? ¿ Esa empuñadura,con espiga débil,y masilla,es operativa? En fin,el " Parto de los montes"( Del que salió un ratoncito)😂
Very Kool Blade well done yet again ,
I will be watching this later
Love it as always!!! You are the MAN!!!
Very cool knife
supongo que se ha dejado una parte del video donde le da el temple a la hoja , por que aqui no sale
Beautiful work. Just curious, but we're are you from?. Do you sell the knives you make and if so is there a website I can go to to look at your knives.
Curious from USA.
Cool❤
What a great transformaion 😉😉
Hello everyone from Armenia ✌🏼🇦🇲✌🏼
Bizdəndə İrəvana salamlar .
🇨🇴
It's a pity you weren't in the Middle Ages😎🤠😎
Apa nama mesin itu
Браво Друже, добър прогрес👌
Good video Knives Project! We love your work, we would like to make a collaboration with you.
Linda peça 👍
All the tools in the shed but what no glasses
👍👍👍
Bıçağın sapına vurduğuvuz plastilin kimi olan matrealın adı nədi
Called JB WELD here in the states
@@fordpower1977thanks
Salam təhlükəsizlik qaydalarına riayət edin zəhmət olmasa. Əlcək və eynək çox gözəl olar və otaqda səliqəli olsa lap yaxşı olar. Uğurlar
Can someone send this guy some PPE???
duvarda "Sadık Cafer" mi yazıyor?
Bu ustamız Azerbaycan'lıdır 🇹🇷🇦🇿
@@kasabanın_şerifi_911👍
çok teşekkür ederim:) @@kasabanın_şerifi_911
А мог бы получится отличный кухонный нож. 🔪 а так сувенир просто.!
A two edge short sword is more fit this material.
Finally figured out what a Dremel sounds like, a cat talking to another cat
I always compared it to a dentist drill...
Продајеш ли и пошто?
Nice, but do not waste materiál.
만드는건 좋은데 연마 하면 더 쓸수 있을텐데 굳이?
Make a ''unbelievable, amazing'' knife from a jewellers anvil.
pisau yang aneh
Не прошло и 30 лет как гарду стали лить прямо на клинок, правда 30 лет назад у меня это лучше получалось)))
Did I miss him quenching the blade
Is doesn't matter he lost his heat treat when he poured the extremely hot brass on the blade, now his blades soft. 7:11
@@stevenbaker43you are aware that it does not matter, right? It is for show. Hell little man, if they can take out an enemy with a rock I am positive this would work too so your argue,ent is still moot
Такой кусок быстрореза и на такую херню... Гдадиус сам напрашивался. Я увидел форму и не смог смотреть дальше.
the finishing touches were done roughly. excuse me
А что ж режущую кромку не сохранил?
Nice work. It looks like a waist knife for an orc. He could cut his meat or you with it...which might the same thing.
This is an exact copy of a cheap mall ninja knife I used to own. This is not an original design.
There aren’t many original designs left these days, at least his is hand forged and not just a bunch of cast pieces made in China or Pakistan.
Страшный.😮
Не понятно для чего такой нож?Только если бумагу резать!
он и это не может...видно на видео
Не практичный,страшный! На любителя!
👏👏👏👏👏❤️🇺🇸👍
Не знаю, как гугл переводчик переведёт слово говно, но это и есть💩. Там такой кусок охеренной стали, быстрореза, что меч - кладенец можно было сделать. Жалко сверла, поди советское...
Ещё минус во всех твоих произведениях, Перетягивай острие клинка)
What happens finally??? Nothing usefull😅😅😅
I would subscribe but the fact that you are using safety glasses is appalling. I don’t want to watch you lose an eye.
Очень неудобный нож и вид не практичный!
That was made so cheap. The craftsmanship was so bad. That piece of iron should be put in the trash.
I was told " it takes less time to do something right the first time, than to explain why you didn't". I wouldn't be proud of that knife. You have the tools to make something really special. And yet you make trash. So very sad.
Salam aleykum usta biraz ehtiyatlı ol açkisiz nəfəs qoruyucusuz işləmə məsləhətnən ALLAH bərəkət versin
Not really pro
Может быть я что то не понимаю, но испортить хороший инструмент для получения какого то нефункионального непонятного говна - это не показатель присутствия большого ума. Жалко сверла.