The Best - Best MotoVlog Helmet Set Up - Shoei GT AIR 2 Review
Вставка
- Опубліковано 18 тра 2021
- Seriously, I'm not claiming to have "The Best Motovlogging Setup" But I have learned some tricks over the years and I'll be sharing those with you guys today. Not only are we going to do a quick motorcycle helmet build but I have also included a Motovlog to test things out and so that you can see and hear the result of what we put together. I have tried a ton of different things over the years, so far these are my favorite ways to a diy motovlogging helmet including adding 2 microphones and customizing a cardo packtalk slim on the Shoei gt Air 2 helmet. Shout out to The Bolt Hole Biker for giving me the confidence to kinda copy what he did. he cut and added back the plastics while I chose to just fill the space in with sugru. Every time I build a new motovlog helmet setup it's almost like the first time again, positioning wires, mics and all the equipment you use. at least that is one thing I know, I know what equipment to buy and use though I do like to experiment with new things and ways. after doing this video I had to adjust my second mic and wire placement (the yadapter was pressing on my head) I thought it was the second mic as I was saying in this video but later found out it was indeed the Y-adapter. I have adjusted things and finally got the wires situated on this tight helmet. I'm not sure yet but I may experiment with moving the mic around. If you guys have any suggestions I would love to hear them! thanks for watching!!!
My Amazon Store:
www.amazon.com/shop/influence...
My Stuff:
GoPro 9 Black - amzn.to/3pdgzs3
GoPro Hero 8 Black - amzn.to/2NjFRrb
GoPro Max - amzn.to/375Xa62
GoPro Mic Adapter - amzn.to/3d4MAjt
Cardo Bluetooth - www.cardosystems.com/products/
Cardo Amazon link - amzn.to/3qegg1o
Quad Lock Motorcycle Fork Stem Mount - amzn.to/2Z8782n
Quad Lock Case for Google Pixel 4XL - amzn.to/2OlWliQ
Shure Lav MVL Mic - amzn.to/3jEBLWy
Y adapter needed to run 2 mics - amzn.to/3qcOZMT
TRRS to TRS Adapter Cable - amzn.to/3qdfUI5
Helmet Mount - amzn.to/3tNUnIk
TechSpec Tank Grips - amzn.to/2NjAsjS
Sugru Moldable Glue - amzn.to/3tS64O2
iCon Carbon Helmet (not recommended) - www.revzilla.com/motorcycle/i...
iCon Contra 2 Leather Jacket - www.revzilla.com/motorcycle/i...
iCon Conflict gloves - www.revzilla.com/motorcycle/i...
iCon Boots - www.revzilla.com/motorcycle/i...
#Motovlogsetup #shoeigtair2
/ shiftedmotovlogs - Навчання та стиль
@3:57 Starts the MotoVlog Ride & Review
Please let me know if you have any suggestions and how you think it turned out.
Thanks for watching!
How's the GT Air 2 working for you now that you have lived with it for awhile? How's the comfort? Noise?
The clarity and your contents are very good that’s why I follow your channel 👍🏻👍🏻😀
I try my best. I guess I added this to early, 4K and 8K haven't been rendered yet.
My wife has the RF-1400 and she feels its very loud. I went from the Bell Eliminator Carbon to the Arai Quantum X. I can tell you the Arai is not only incredibly comfortable, SNELL certified but it is also noticibly quieter. I have a hard time hearing just talking to my wife with the helmet on and off the bike. Great helmet. Nice video, thank you!
Dope setup bro!!!
Thanks MJ!
Nice to be back boss ed!
😁
Good looking sir ed. 👌
Thanks Maki
Nice vlogging set up boss... i can only wish for that set up hahaha ride safe at your own pace boss...
Thanks #RideSafe
wow ur diet is going good buddy keep it up!
Thanks, I lost like 40lbs 😊
great info :D
From my experience GT air 2 is one of the quietest one, however what I noticed is that it gets more noise when I have the cafe fairing on, it's quiet when there is no fairing. I realized my fairing was directing the wind straight into that open vent on the top and wind deflecting from there was the reason for noise. I remove fairing and it's really good.
Moral of the story, there are factors to consider than just the helmet, fairing or wind deflectors being one of them.
Yeah i hear ya, but i think even my iCon has less noise though i do love the Shoei
@@SHIFT-ED never had Icon.. will look it up.
Finally the reveal to how we can hear your intercom haha
I showed it once before, but still get asked a lot..lol
@@SHIFT-ED yeah i can remember that you did that here in the philippines right?
@@jmartzon2 yes sir 😊
Hi. How did you managed to put cardo slim in your Shoei? 🤔
Great video man. I’ve purchased the cardo slim and also have the gt air 2 and can’t for the life of me figure out how is fits in. Could you tell me how you did it?
I took the side price off, dremeled a little off the plastic still on the helmet, then forced on the packtalk slim and filled it in with sugru.
My Facebook is Ed Hammer, I'll try to help ya with better detail and pics if u wanna msg me there or Instagram
I’m on the same “boat”, got gifted a Packtalk Slim Duo for my fiancé and me for Christmas and it seems SHIFT-ED’s is the only YT video that has this set up!
Hi dude. Are you gonna comeback to Philippines? Really want to have you on a ride
I will be back there soon as I'm able.
Does the cardo speaker fit perfectly into the speaker hole? Thanks
Would love to see how you mounted the cardo slim to the helmet. Most helmets opting to go sena way built in is putting me off buying them
I have the Shoei Air 2. I just wear earplugs 😎. I bought the chin mount and hope it sticks. I didn’t know I needed to use sugru. Hope I don’t lose my Hero 10😓
Great video thanks. Where you have your gopro at does it block the ventilation? I'll be gettin this helmet in the future.
I would suggest against this helmet. It doesn't block vents depending on how you install the mount, but it's a very noisy helmet.
@@SHIFT-ED thanks, have any suggestions on a quiet helmet.
@@locoocho2415 maybe it's not fair for me to just be so straight forward and say not to get it. It really depends on your style of riding etc. If your not going fast, the wind isn't to bad.. if you watch a few of my videos you'll be able to really hear how it is. I haven't yet found a helmet I'm satisfied with (my LS2 was discontinued). But I do like the Shoei other than a few things. If gets really heavy from sweat, the chin strap is back to far and the noise at high speed, other than that I love it.
@@SHIFT-ED Thank you kindly for your response.
@@locoocho2415 No Problem, Thanks for watching
Nice...
😊
I have the same problem with helmets. Wind comes in in the jaw area. What i think its my problem is that i have a long oval head and most helmets are round oval. Icon and ls2 have long oval shapes
My problem with this one is the back, weird... I added something to the back to block wind coming in but it didn't help, I guess it's just the shape on the back.
How did You mount the cardo slim on the side of the helmet. Like the review..
took off the side plastic piece (cut a little with dremel), pushed the packtalk slim into place then filled in with sugru
Have you ever tried the chin mount by “ride tech”?
Thanks
Haven’t seen that one
Could you show how you attached your gopro to the front of your shoei. Isn't that where the air ventilation is?
If you click the link in description you will see what mount i used, i attached with double sided tape then added sugru around it. The vent is still functional. I believe this video shows me adding it?
Nice
Thanks : )
What LS2 model are you using here in the Philippines? Does it go with red and black?
@@dongyamotovlog8505 The carbon fiber citation, I would have bought it again here but it's discontinued.
@@SHIFT-ED there must be a new and improved version one that isn't matte finished but a glossy carbon fiber finish hahah
@@dongyamotovlog8505 I have seen the replacement, I think the old one had a better she'll design and I liked the iridium drop down visor. Wish I could see the new style in person and test it out, but don't wanna spend the $$$ on it.
How have u adjusted the slim to fit the GTA2? I just bought myself the Shoei and tempted to buy the Cardo packtalk. But don't see how u can adjust the slim to fit it.
Take off the plastic side piece, (I cut a little of the plastic remaining on the helmet) put the slim on, then filled it in with Sugru. But it will no longer be removable. There is a guy who made a video on how he did his. I don't think he cut the plastic on his helmet, I just wanted a different placement on mine.
@@SHIFT-ED thanks for the info! Tempted to do it two. Don’t like the look of the bold on the helmet. Guess i have to find the video you mentioned! Hope I find it so i can try it myself.
anny chance u can find that video? Ive been looking for it but had no luck so far!
@@StefSchuddinck I'm pretty sure the name on the thumb was "And they said it can't be done".
@@StefSchuddinck ua-cam.com/video/DIs1psWgng8/v-deo.html
I also bought a Shoei GT AIR 2 and I'm a bit disappointed with the wind noise, sounds way noisier than my Scorpion EXO1400 which costs half the price of the Shoei.
What people recommend in term is low wind noise is Schubert S2. I haven't tried it, but have seen the helmet in person and at least it looks like there's some engineering addressing the aerodimanics.
It's amazing how hard it is to find a helmet that checks all the boxes... At least this one has most of what I want in a helmet. Wind noise....ehhhh that one is always tough..
Does your windshield flow air to the top intake. I read the Air series is meant for naked bikes. Air hitting the scoop looks like it can cause turbulence.
Did you ever find a solution for the noise in your Shoei? I am a new rider and bought one along with my new bike 2 weeks ago. I thought it was just me being a new rider. But the noise in my helmet especially on the freeway is very loud.
Unfortunately... No... There is no fixing the noise in this helmet.. no way that I can find.
Sadly most of the full face helmets are there too loud for com systems... if I use earplugs can’t hear the speakers much especially at high speeds.
Anyway, the wind noise is coming from the bottom of the helmet indeed.
By this time, someone should start to make a decent quality skirt for the helmets.✌️
(Video A+) Thanks!
@@tiborsz9939 with the cardo i have no problem hearing the speakers in a full face helmet (after cutting away cloth covering them). The noise is coming from the back side of the helmet and adding a curtain to the back didn’t help. 😥
you dont really need two mics. Puting your primary mic near the speaker will do. It will pick up your voice and your mates very well!
I wonder how this helmet compares to the RF-1400 in terms of noise.
Good question, i heard the rf1400 is quiet but… i heard the same about this one as well.
I got the same Helmet, did the LS2 hack work? Where can i get that?
Whats the LS2 hack?
On your video at timestamp 9:50 you used an LS2 chin curtain. Did it work? I need a hack to quiet down the GT air 2
@@tokutraveler9394 Sadly no.. It didn't help at all.
Are you still using the Shoei for vlogs? I recently ordered a cam and mic to setup
@@tokutraveler9394 yes its my goto helmet for now. I like the looks and functions. Wish it were more comfortable and quieter. I may try a different version of iCon soon.
I wonder why yours is so loud it's by far the quietest helmet I've ever worn alot quieter than agv icon and ruroc atlas
Strange, mine is really loud, I think it may be even worse than my icon lol
Ride safe.
#RideSafe 🙂
I love my gt 2, but it's loud !
Whats up joseph when you back in to the phillippines joseph imiss vlog the phillippines👍✌✌
I'm trying to get back there, hope they open soon without restrictions
when i see your helmet it reminds me of masked rider he wore a shoei helmet
Masked rider? Is that a UA-camr?
masked rider a japanese hero in the 90s lol
I did not think the noise was too bad and could hear the voice clearly at all times, it is quieter when your covering the bottom of the helmet, but was acceptable even without doing that. Keep your hands on the handle bars, one unseen pothole or obstacle in the road could put you in traction.
When I heard it on the computer it's not so bad, while riding I could hear a lot of wind noise. I have a little trick I'm going to try out. Added a leather chin guard to the back, hope to ride tomorrow and see how it works out. Also in this video, I was going slow. I'm hoping for it to stay quiet at speeds above 100mph
Have you tried wearing a Tube Mask on it?
Have not tried that yet. I'll search it, thanks.
Very nice Helmet unfortunately it's a luxury for me. Hehe
heh.. for me too, took me a while before buying.
Bro there is a new busa
Yeah I wanna see it in person.
🖤
Weird, widely rated as one of the quietest helmets around
Yeah that kinda makes me upset, I researched it a lot and everyone was saying it's quiet. Now that I make this video I hear others talking about how loud it is.
Kano moto? What happened to your channel?
Still have it, will use when I get back to the Philippines
@@SHIFT-ED can wait to see you in the philippines 🇵🇭 motovlogging shout out from japan 🇯🇵
I find that 90% of the time the wind noise always comes from the neck.
strange thing is this one comes from the back, and it doesn't seem to be coming in as I added leather to the back. I ordered my Yoshi's today. maybe that extra sound will remove the wind noise some.
Well. For comparison, i have a SDR, the icon airflite FN SUCKS. SO SO so so so loud, so loud, sloppy, loud, air leaks everywhere, even around the glass
I'm not sure what the sdr is but, the one I have is also super loud. And I wouldn't brag on the quality of the shell (my first one came cracked) but iCon nailed it on the padding. Better than any helmet I have ever seen.
Asaan na kaya si diablo
Kamote Rider (Squid Rider) in Philippines