Wow! Those are in such good shape. I wish the RX2's on my girlfriend's MK4 Jetta were this clean haha! The red caps really make all the difference too!
10:19......My '03 GLS 1.8T came from Coral Gables or Coral Springs..(if Gunther was around 20+ years ago then..yes) It was seized/repossessed from original owner for unknown reasons sold at auction in Florida and made it's way up the coast to the Fredricksburg Auto Auction and then ended up on my cousin's lot in Madison, Virginia...(this is 10yrs ago this past January)....I bought the Jetta from my brother after he had it 6mo....it being an original Florida vehicle...IT HAS NEVER HAD IT'S FRONT BUMPER DRILLED FOR PLATE MOUNTS!!!!!...NEVER!!!...The state of Virginia (notice I didn't say GREAT) has been a 2 plate state since before 1948 or around 1950.......I've been pulled up here in Richmond more than a few times even once by State Police...and I vehemently proclaim that I refuse to drill holes into my investment...the plate is in the right front corner of the windshield EXTREMELY VISIBLE plus for the fact that if I'm being pulled..they are in FULL VIEW OF MY REAR PLATE... so after 70+ years......shit is finally getting contested..........(not all of us up here in RICHMOND need a damn yellow "DONT TREAD ON ME PLATE"....to speak it truly... to the FACE OF THE LAW!!!..) -"Dre' The Cajun"- DES ALLEMANDS BAYOU CANE.......... find me in the 804
Another trick to get the stuck lugnuts to come loose when you can’t put on the e-brake or have another to hit the brakes is to tighten up the 2 lug bolts/nuts next to it That spreads out the amount of flex of the wheel holding the one lug bolt/nut on, and makes it easier to remove That’s why its a good idea to always JUST break all the lugnuts loose, before removing them all if all you have is a hand wrench/breaker bar or a weak impact gun
Awesome find I just found a set with an almost identical design but in 18s. Like you said they have curb rash like most and peeling clear but overall going to be a fun project for my first wheel restoration for some nice mk7R OEM+ looking wheels when not running my racing wheels
I run these on my subie. They were a pain in the butt to restore though. They were so corroded from salty winter roads, and I snapped the heads off a few of the titanium bolts. Had to bring it to a shop and have them get drilled out, because I wasn’t going to risk messing them up any worse.
I found the same wheels at the junk yard for my old mk4 Jetta while looking for a fender picked them up quick!!!! Miss my Jetta but my mk6 golf is great
Ive got the exact same RS771 set, yours look like brand new compared to how mine looked when I got them. Took me a week of sanding and polishing the lips to get them back to decent looking, repainted the hearts to a slightly different color to improve the contrast betweeen high-gloss polished lips and the hearts. Too bad these have a horrible weak (ET43)offset and are very narrow, they just don`t do it for me on my project, even with spacers they just dont look right, and they are now sitting unused in my shed waiting to get swapped or sold off
Had a set of those on my Mk4 VR6 a couple years back, I regret selling them would have been dope on some Firehawk Indy 500 tires. I believe they came on the Wolfsburg Edition
its crazy how much they look like the mini cooper bbs oem wheels. its the same exact design from the looks of it just in a 17x7 +48? cant remember the off set. but yeah there are 2 that i know of for the first gen minis r50-r53 generation that had 2 piece bbs wheels. the one that looks like this are called r90's and then thers the r98's which are the ones that i have. whats funny is they have exact same issues. clear coat failure on the lips most have some rash. mine have some rash and clear coat failure and some how a gouge in the side of one of the spokes. at one point id love to send them off to be rebuilt and refubed into 17x7.5 in front and 17x8 in rear with around a 35 offset. oem bbs wheels are suttle but so bad ass.they also can take a hell of a hit and still be fine.
Those came standard on the mk4 Jetta Wolfsburg edition. They made those in 2001 and 2004 (different editions). The car you pulled them from was a 2.0 and all wolfsburgs were 1.8t. Therefore, the owner of that mk4 either bought them from someone or stole them 😂 I had an 01 galactic blue Wolfsburg that I miss every day
Be careful with those titanium bolts. Soak them in penetrant and brakleen to make them easier to remove. I'm working on some w8 2 piece wheels currently snapped two
seeing America has the BBS RX .. 1J0 601 025BB . there the one piece version of the Rx2/771 and there always and only Mk4 market.. Rs772 is 20Jahre mk3 only spec and wider
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I picked up a set of these and threw them on my beater for winter wheels! I knew they were from a VW, but wasn’t sure which model. Thanks!
Glad to see you made to the Junkyard in time to save these BBS wheels. Awesome video 🏁
Love any of them BBS wheels ! Mate can you make a video of all the sets of wheels you have ? Would be awesome
If I can get them all together I will 🤘🏼
Wow! Those are in such good shape. I wish the RX2's on my girlfriend's MK4 Jetta were this clean haha! The red caps really make all the difference too!
Happy 50 years of Golf
10:19......My '03 GLS 1.8T came from Coral Gables or Coral Springs..(if Gunther was around 20+ years ago then..yes)
It was seized/repossessed from original owner for unknown reasons sold at auction in Florida and made it's way up the coast to the Fredricksburg Auto Auction and then ended up on my cousin's lot in Madison, Virginia...(this is 10yrs ago this past January)....I bought the Jetta from my brother after he had it 6mo....it being an original Florida vehicle...IT HAS NEVER HAD IT'S FRONT BUMPER DRILLED FOR PLATE MOUNTS!!!!!...NEVER!!!...The state of Virginia (notice I didn't say GREAT) has been a 2 plate state since before 1948 or around 1950.......I've been pulled up here in Richmond more than a few times even once by State Police...and I vehemently proclaim that I refuse to drill holes into my investment...the plate is in the right front corner of the windshield EXTREMELY VISIBLE plus for the fact that if I'm being pulled..they are in FULL VIEW OF MY REAR PLATE...
so after 70+ years......shit is finally getting contested..........(not all of us up here in RICHMOND need a damn yellow "DONT TREAD ON ME PLATE"....to speak it truly... to the FACE OF THE LAW!!!..)
-"Dre' The Cajun"-
DES ALLEMANDS
BAYOU CANE.......... find me in the 804
Nice. Always grab the upper door seal things from mk4s since they tend to split and are NLA from VW.
Always liked those they come standard on the Wolfsburg edition.
I save wheel locks anytime i find em because you never know when a fire set of wheels will pop up at the junkyard!
How much do they typically charge for a set of wheels ?
BBS mania ! Good junkyard find. Thanks, RickGTI ….. 🌴
Another trick to get the stuck lugnuts to come loose when you can’t put on the e-brake or have another to hit the brakes is to tighten up the 2 lug bolts/nuts next to it
That spreads out the amount of flex of the wheel holding the one lug bolt/nut on, and makes it easier to remove
That’s why its a good idea to always JUST break all the lugnuts loose, before removing them all if all you have is a hand wrench/breaker bar or a weak impact gun
Awesome find I just found a set with an almost identical design but in 18s. Like you said they have curb rash like most and peeling clear but overall going to be a fun project for my first wheel restoration for some nice mk7R OEM+ looking wheels when not running my racing wheels
Thoses wheels look killer on mk2's it's the ultimate set
I run these on my subie. They were a pain in the butt to restore though. They were so corroded from salty winter roads, and I snapped the heads off a few of the titanium bolts. Had to bring it to a shop and have them get drilled out, because I wasn’t going to risk messing them up any worse.
I'm liking Vw's more everyday! May gonna buy a B5.5 Passat 1.8t or v5
Dont buy an audi
Nice I have a set I made nice for my mk3 vr6, but currently running a set of 17s bbs pitlanes, while I get ready to referb my 17S bbs lms
I found the same wheels at the junk yard for my old mk4 Jetta while looking for a fender picked them up quick!!!! Miss my Jetta but my mk6 golf is great
Hey Christian, That Jetta you were looking at you should buy the entire car.
I’m not sure if this yard sells complete cars or not. I’ll have to ask and see. But also that mk5 had damage and the engine was all torn apart
I really miss my mk5 I'm buying another soon hopefully a manual wagon with the 07k
Ive got the exact same RS771 set, yours look like brand new compared to how mine looked when I got them.
Took me a week of sanding and polishing the lips to get them back to decent looking, repainted the hearts to a slightly different color to improve the contrast betweeen high-gloss polished lips and the hearts.
Too bad these have a horrible weak (ET43)offset and are very narrow, they just don`t do it for me on my project, even with spacers they just dont look right, and they are now sitting unused in my shed waiting to get swapped or sold off
Had a set of those on my Mk4 VR6 a couple years back, I regret selling them would have been dope on some Firehawk Indy 500 tires. I believe they came on the Wolfsburg Edition
How would you know the torque specs for those wheels if you were to split the faces
Probably just google it, or look it up on the manufactors website
Yeah I’d just google it and I’m sure someone knows the answer 👍🏼
its crazy how much they look like the mini cooper bbs oem wheels. its the same exact design from the looks of it just in a 17x7 +48? cant remember the off set. but yeah there are 2 that i know of for the first gen minis r50-r53 generation that had 2 piece bbs wheels. the one that looks like this are called r90's and then thers the r98's which are the ones that i have. whats funny is they have exact same issues. clear coat failure on the lips most have some rash. mine have some rash and clear coat failure and some how a gouge in the side of one of the spokes. at one point id love to send them off to be rebuilt and refubed into 17x7.5 in front and 17x8 in rear with around a 35 offset. oem bbs wheels are suttle but so bad ass.they also can take a hell of a hit and still be fine.
Did you check the boot for a spare
Hi. What camera do you use ?
Awesome score 🥳🥳🥳👍
I would put them on the pink Floyd!
I had the exact same bbs wheel setup on my jetts mk4 ❤
Those came standard on the mk4 Jetta Wolfsburg edition. They made those in 2001 and 2004 (different editions). The car you pulled them from was a 2.0 and all wolfsburgs were 1.8t. Therefore, the owner of that mk4 either bought them from someone or stole them 😂 I had an 01 galactic blue Wolfsburg that I miss every day
im sure you could buy them from the dealer too as an option. like maybe not all dealers but some could. euro companies are so odd with things
If I recall correctly the rxii’s were not options because they were specific to the Wolfsburg edition. At least in the US.
Be careful with those titanium bolts. Soak them in penetrant and brakleen to make them easier to remove. I'm working on some w8 2 piece wheels currently snapped two
Do you happen to know the bolt specs. I too have 2 snapped in total😅
Love to see it🎉
gotta get some 3/8 & 1/2 anvil impact guns, a world of a difference. my milwaukee arsenal can take apart the whole world or so it feels like 🤣
Yooo the LM’s go crazzzzzzzyyyyyyyy🫡👏🏼👏🏼👏🏼👏🏼🔥
yea man those were on a vw jetta i almost bought back in the day. it was a wolfsburg edition and 5 speed.
BBS rs 771
They are my favorit set of wheels ❤🥰😍
Are the black rear interior lights over priced in the us like the uk?
Dam I miss my MK4. And my ABA rabbit
Nice score!
Didn't checked for spare?
I have an mk5 jetta 2.5 and i love it
Nothing compares to a set of original 3 piece BBS RS’s…….absolutely Nothing 😂
I’m waiting for the day I find a set of rs’s in a junkyard 😂😂
I got a set of 4x100 rs’s that I kept from my old mk2 that I sold I have yet to have the courage to sell them.
Put on a bigger lip and build them for te MK2!
These are 2 pieces, only the face come off, you would need to cut and weld some piece of aluminum to get a wider lip
Nice find bro
It's always a hunt for these wheels here in SA bro
Hey. I'm here in Delaware what yard is that
😮these wheels are rare in the us
In sa they are pretty popular
Are those reps ?
The wheels are cool but theyre literally worth like $200. Came on all Wolfsburg Editions.
where can i get a medium console, under the armrest VW JETTA
I was gonna say, I’ve always known them as BBS RX-2’s - those would have been a great set for the pink Floyd
The tires don’t even look bad either (edit: except for the one 😂) Great find sir!
They came on the MK3 and MK4 the came on the 25 th aniversary Volkswagen on the MK3 GTi and GTI TDI and same models on the MK4 if im not wrong
Score score score..
You need to get a better impact gun . That will fix that problem
It was on like 1% I forgot to charge it lol normally it has no issues
Can’t believe they let the dude at 4:15 into the yard in sandals! Why would you even do that? It’s raining and muddy, dude’s feet must be gross! 😅
RX2 US Market. 771 ...EU Market
seeing America has the BBS RX .. 1J0 601 025BB . there the one piece version of the Rx2/771 and there always and only Mk4 market.. Rs772 is 20Jahre mk3 only spec and wider
Did you check for spare might be 5 lol
Do you still live in Germany 🇩🇪
First🎉