Time and frequency domains
Вставка
- Опубліковано 26 вер 2024
- This video lesson is part of a complete course on neuroscience time series analyses.
The full course includes
- over 47 hours of video instruction
- lots and lots of MATLAB exercises and problem sets
- access to a dedicated Q&A forum.
You can find out more here:
www.udemy.com/...
For more online courses about programming, data analysis, linear algebra, and statistics, see
sincxpress.com/
The search ends.. Finally an Excellent explanation of the concept with total clarity. Thanks a lot!
And now my search for the best UA-cam comment has ended! We may both go in peace ;)
I sure hope so. Shouldn't take me that many more decades.... Omg! seven minutes in, it's true! Can't thank you enough.
i can confirm that
i was looking for so long to know the use of spectrum untill setteled here
What will this help exactly
It is actually the best explanation I have seen so far.
Clear voice, clear images, clearly explained. Thank you.
Mike Cohen and Mark Newman. The saving graces of any learner. Good stuff mister 👍🏻👍🏻.
Thanks for the clarity of your explanations! I have to agree with other comments : you give the best lectures on signal analysis I've seen so far!
awww, thanks!
You are one of the best in the UA-cam to explaining frequency. thank you for your effort
You rock, Yasser!
Thank you so much that was so clear !! We have hours of courses in university and still understand nothing, but here with a 10 min videos everything is cristal clear !! Wonderful job
Glad it helped!
Thank you. I hope that conveys how much I appreciate you tutorials.
Thanks! I'm glad you've found them useful.
Finally, a clear explanation. Thank you!
Glad it was helpful!
you r one of the top teacher ive met,now frequency domain is sooo clear ..iv searrch for many youtuber to make me understand it n i found none but only u sir.......people should watch your videos to clear thei concept......you r the first youtuber where i memories the channel name.......keep it up sir
Happy to help!
I have been searching for a month. I can finally get an intuitive idea. Really appreciated!
In under ten minutes, along with clear pictures and verbal descriptions, you have removed the mystery (to me) of understanding the how/why/what-is-it-useful-for of Fourier transforms. I also appreciated that on the last slide, you explained the three things a student must be familiar with to do Fourier analysis (sine wave, complex numbers, dot product), and showed how the three things are combined to reach the end goal of Fourier coefficients. Thank you, and I look forward to watching your videos as I self-educate!
Awesome, thanks John :) I hope you find the rest of my videos just as useful!
@@mikexcohen1 I bought your course on Udemy, so I will give an assesment on the usefulness/understandability throughout the course. Overall, my goal in taking the course is to gain a better appreciation for signal processing.
Finally, I can stop my search on this topic bcos I've got it
Now you make me blush :D
Thank you very much for this extremely clear and helpful series of over 17 videos explaining the Fourier Transform from basic concepts. so super cool 😎
Glad it was helpful!
This is so clearly explained! Thank you!
Give this guy a medal!
Thank you, kind internet stranger.
i gotta tell you for doing this video that, you are the definition of "Inner peace", at this moment :)
If you can't fall asleep at night, try playing this video :P
Thank you so much!! I was trying to find a source to understand the difference clearly. You are awesome! I appreciate.
No, *you* are awesome!
I finally understand why FT is used!! Was really lost in my digital image processing course for a while. Thank you for such a spectacular explanation, you're amazing!
Awesome :)
The best explaination I've seen of this so far.
Thanks :)
Thank you, this is the explanation im looking for quite sometime.
FINALLY UNDERSTOOD this basic concepts. well done. thank you
Awesome ;)
Sir you are born to be a teacher ! I have follow your courses in Udemy and they are wonderfull too!
Thank you kindly, user-hg1mn3qo8x.
thank you for such a great and informative video!
Great way to explain both the domains.
Hi, I use wavelets and Hilbert transform methods to analyze sea wave data for my Ph.D. in oceanography. Your videos and your book are really helpful. Thanks for your work
Thank you, Carlos. I'm glad you're finding these useful.
Wonderful explanation, brief, clear and simple. Lot of thankss..
Awesome, I'm glad you found it useful.
Wow! Excellent explanation!
Glad you liked it :)
Hi Mike,
I hope you are well.
Absolutely beautiful way to explain the process, very impressive.
Keep up the good work
Thank you kindly, Wasil.
Thank you, you are great on this subjects. keep educating us
Will do! Thanks!
finally I know what these frequency graphs tell...
Nice ;)
searched a lot with the physical revelance of frequency domain and the search ended here. Thanks
Awesome :)
thank you ! easy to understand and visually striking !
A nice explanation with most clear concept.
Wow..... What an explanation that is. Clear. Thanks a lot.
Thank for such as great explanation!!
Glad it was helpful!
شكرا جزيلا لك thank you very much :)
Thanks, and it's so easy & simple!
EXCELLENT!!!
This is pure gold ❤
❤
Fantastic resources, thanks Mike!
Thanks Frini!
thank for the clear explanation. i wonder how to interpret frequency domain in 2D. like image. each row in image can be interpreted like your explaination. but as we know that image contain many rows. how we can visualize frequency domain of many rows. in addition images have columns too. thank you
Nice way presented the Noise, which i struggled before to understand.
One Question...
1. In nose induced signal, time domain max amplitude goes to ~5. But frequency domain is 1. Could you clarify plz?
I'm not sure which graph you're referring to, but the time domain signal is a combination of all frequencies. Noise is a good example of the advantage of the frequency domain, because noise amplitudes might be smaller in the frequency domain than in the time domain.
@@mikexcohen1 This Clarified my query. Awesome explanation dude. Now I understand the FFT.
Can we say that: fourier transform is a crosscorellation of a time dependent function with sine or cosine function for different frequencies.
Hmm, I would use that description for a wavelet analysis. The term "cross-correlation" means to repeatedly shift one signal relative to the other. The Fourier transform is better thought of as the correlation (not cross-correlation) between the signal and a set of sine waves. The correlation has two normalization factors that the Fourier transform doesn't have, but otherwise it's a good analogy.
Thanks bro for this awesome vedio
You got it, bro.
Very well explained!
Great Explanation :)
Glad you liked it!
Very great explanation.
How we can convert from the time domain to the frequency domain in MATLAB?
I used the following code to convert data from time domain to frequency, but the plots in the frequency domain are totally different from what I see in this video and I can not get information from them.
This is the code:
%% Compute the Fast Fourier Transform FFT of the refrigerator
dt=.001;
n=length(ref(9906:31449));
fhat=fft(ref(9906:31449),n); % Compute the Fast Fourier Transform
PSD=fhat.*conj(fhat)/n; %Power spectrum (power per frerquency)
freq=1/(dt*n)*(0:n); %Create x-axis of frequencies in Hz
L=1:floor(n/2); %Only plot the first half of freqs
figure;
plot(freq(L),PSD(L))
title('FFT')
Thank you, I finally understood
Awesome.
It was so beneficial to me, and the explains were so clear, but you pointed out why the amplitude is half of the distance between throughs and the peaks. Could you please explain that?
Thank you, Sara, that's nice to hear. The answer to your question is in my playlist NEW-ANTS#2, don't remember offhand which video exactly.
Thanks so much for this fantastic explanation :)
Glad it was helpful!
why do you count the picks and not the periodes of the signals ?
thank you for the videos
You can also do that. I just counted the peaks to illustrate the concept.
Thank you very much for providing a concise and informative explanation.
Thank you.
hi, is there a difference in sound? i saw ifi ad from their dongle, instead of frequency domain they manipulate the time domain. sorry i don't understand any of your explanation(i am on health sector). thank you if you ever read and answer this.
Thats what I was finding, thanks
thank you
I'm your big fan
:D
thanks Mike
That was purly ı was looking for .
Nice :)
Mr., where r u all these time?
Don't worry, I'm still around :) working on new courses, books, research, etc. And trying to enjoy the weather now and then!
Search ends
AT 3:50 when you say its difficult, yet possible to figure out the frequency components from the time graph, can you help how you would figure that out?
Well, you'd have to look at the time series data and count the number of peaks (or troughs) within a 1-second window. It's not very precise and can be impossible if there's too much noise.
@@mikexcohen1 Thank you so much for your response
thank you for that's awesome video
cleared all my doubts sir:)
That's good. Doubts make you age faster, so I'm happy I can help you stay young ;)
@@mikexcohen1 😅
Finaly i understand it thhhaaaaaannnnkkkkkk uuuuu ssssooooooo muchhhhhhhhhh u r a hero
Yoooouuuu'rreee weeeeellllllcccooommmeee!!!
Amazing, thank you ;)
Thanks Mike this clearly explained . Can it happen Noise Amplitude starts dominating sinosodial waves meaning SNR
Cleaning noise from a signal can be trivial, difficult, or impossible, depending on the nature of the signal and the noise. So there isn't one specific strategy that always works. But if the signal and noise have different spectral signatures, then filtering (e.g., FIR filters) is usually pretty successful.
Cristal Clear
Noice.
nice !
please , if I want to create image from sampled signal ( sine wave for example ), how can get this please
the image like white line and black line
Thanks br0😁
That was excellent
Thanks Steve.
Thanks wow
I want the code
One More Question--
I am in a way to convert a random road load data to PSD graph for FEA simulation.
Could you help me understand the physics involved to simplify the data in frequency domain.
Also need to understand the role of Gaussian or PDF in the algorithm!
Thank u so much it was really helpful 😇
🙏🙏🌹🌹
i love you
I love you too, 808.
In the second example, the amplitude must be 5 not 1
Why must that be the case?
THANK YOU
You really made this easy, thank you. I was struggling with understanding these two domains but now the light is there.
Thank you kindly, Mveliso. I'm glad you found it useful.
Thank you.
You're welcome!
Thank you, it help me here!
I am doing a math ia on this topic and this video is extremely helpful and easy to understand. Thank you so much
Glad it was helpful!
Finally, a very clear explanation! Thank you for posting!
:)
Crystal clear explanation! Thank you