I am AMAZED at how easy and modular the Mercedes Benz part upgrades are!! I would have thought they would be much more difficult. Looks amazing! I would like to upgrade my wife's new Lexus RX350 front facia with the FSport model front. I wonder if the Japanese product is this easy to do?!!
Did you have to change muffler shield or modified the one you had? I was thinking exhaust tips you put on might hit the shield since it doesn’t have the cut out for tips. TIA
I have 3 questions. 1. Do you advice I buy your aftermarket gle head lights or the Mercedes original? I don't have idea about coding though. 2. Does the rear taillights need coding? 3. Do I need to replace the front fender liner, or the old one fits fine?
Hi Chris, I note that you are using a single jack to hold up the back of the car. Can you let me know exactly where the "safe" jacking point is for the rear of the car? I guess it will then be easy to put in Axle stands on the two rear jacking points along the sills. Is there an equivalent jacking point also at the front too? Thanks in advance
So the end-pipes are just for show? As the exhaust points down.. Saw that it was the same on the new GLE 450 -19 model reviled the other day. I think that´s quite dumb design...
Are the side mounting brackets the same on the ml and gle? Do they have to be replaced depending on what bumper you have or could I just use my original ml ones? Also does the very rear bumper mount have to be changed or could the original be modified to fitter new bumper? Thanks for you advice.
hello, could you give me a part number for the exhaust bracket? in the parts catalog is A2928853400 & A2928853300 but look completely different and are intended for the coupe.
I am AMAZED at how easy and modular the Mercedes Benz part upgrades are!! I would have thought they would be much more difficult. Looks amazing! I would like to upgrade my wife's new Lexus RX350 front facia with the FSport model front. I wonder if the Japanese product is this easy to do?!!
Did you have to change muffler shield or modified the one you had? I was thinking exhaust tips you put on might hit the shield since it doesn’t have the cut out for tips. TIA
Not needed.
Awesome 👏
I have the same ml350....I'm looking for the same body kit...
Cool
I installed halogen headlight from GLE to a 2012 ML. The signal lights do not work. They blink 3 times and then they shot off. Any advice?
Can you do 2013 ML350 front bumper cover ? Thank you
Do all parts fit plug and play? Can I just buy all parts at Mercedes and obstruct? I just want to change the exterior design. Greets
Yes.
I have 3 questions.
1. Do you advice I buy your aftermarket gle head lights or the Mercedes original? I don't have idea about coding though.
2. Does the rear taillights need coding?
3. Do I need to replace the front fender liner, or the old one fits fine?
1 Does not matter I think. 2 Yes. 3.Yes needs replacing.
Hi Chris, I note that you are using a single jack to hold up the back of the car. Can you let me know exactly where the "safe" jacking point is for the rear of the car? I guess it will then be easy to put in Axle stands on the two rear jacking points along the sills. Is there an equivalent jacking point also at the front too? Thanks in advance
I put it on rear axle diff. In front on the bar there is a plate for it.
I can't find a site where I can buy a circlip.Thanks for you advice.
What is that?
@@CKMCardesign It is a clip that comes out at 1:59. A000 991 0270 ← Is the number correct?
@@pin77mov Yes
@@CKMCardesign THX. I want you to tell me where to buy the parts. I can't find it even if I google.
@@pin77mov Its right there on my site.
That‘s Look Great! From where have you bought all of the Parts ? I Need also But i live in Austria ( Eu) and i can‘t find. Thank you :)
Look at my site...I can get you all you need both new and used.
Bekommst bestimmt alles beim Freundlichen.
So the end-pipes are just for show?
As the exhaust points down..
Saw that it was the same on the new GLE 450 -19 model reviled the other day.
I think that´s quite dumb design...
I cut the oem pipe of course so it blows the smoke the right way. Just like the OEM GLE 63.
Are the side mounting brackets the same on the ml and gle? Do they have to be replaced depending on what bumper you have or could I just use my original ml ones? Also does the very rear bumper mount have to be changed or could the original be modified to fitter new bumper?
Thanks for you advice.
See the white ML series..
@@CKMCardesign thanks for your response I’ll check it out now.
hello chris, can i not reuse the chrome loading edge of the old bumper you showed at the beginning?
Yes you can.
@@CKMCardesign thx 🙏🏽
Hi.
i need the part number from this 1:29
Hi there, I'm replacing my rear valance on my W166. Are there any clips I need?
Not that I remember.
Should of ditched the chrome and went wood😉😉 good job 👍🏻
Wood??
Part number 1.29, please?
Where did you order the new amg rear bumper? Is that after market or OEM parts? Can you please provide details of the part’s number? Thanks!
OEM. I can get you all you need. New and used.
CKMCardesign I’m thinking of getting a new amg look for my rear bumper.
I was looking at ordering oem parts but not sure if i can do the install myself.
CKMCardesign Do you provide installation as well? Or just ordering the parts?
Do you guys ship to New York ?
Depends on what you want?
@@CKMCardesign I have the same ML350 2014, I just wanted to upgrade the front bumper, grill and other parts!
@@bloodyyyyzzz2355 For bumpers we only ship with boat. To big for air.
I have mind and I want to upgrade as well. Please where are I located.
Sweden
Vart ifån importerade du bilen och vad kostade det?
USA.
Men hur mycket kostar inte impoteringen då??
@@Purpleglace Frakt 13000.- sen 30% tull och moms.
CKMCardesign jaha inte så farligt?
Will this work on the w164 2006-2008 do you know?
Absolutelly not.
hello, could you give me a part number for the exhaust bracket? in the parts catalog is A2928853400 & A2928853300 but look completely different and are intended for the coupe.
Please mail me.
this part number don't exist 2:03
What rim and these size you use ?
22"x9 OEM look wheels.
How much did this cost
See site for parts.
The parts that you use, are new? Or used?
Both.
bonjour je veux la parsoc arriére