hp printer ink problem | hp printer E3 error | color mismatch in hp printer

घर बैठे अपने प्रिंटर को सही करें,
#hpprinter
#hpprinterrepair
#hpprinterinkproblem
#hpprintercolormismatch
#hpcom
#hpprinterprintingproblem
#printingproblem
Thanks

[@IKYA2020]

Thanks.... I save due tobthis video upto 4000/-

[@aamansingh4038]

Your Video Is Most Better Than Other Videos On UA-cam.
For Topic E3 Problem

[@gautambanerjee8581]

Air gap in pipe problem description good.

[@anubhavrohilla5412]

mast hae, usefull

[@mercredi16h]

thank you sir

[@nickycoleman]

I bought a HP smart tank plus 555. After 5 months I had print problems with the black ink, Looking inside I found that the black ink pipe was full of bubbles.
I guessed that as it stood there it was sucking air back through the print head as the ink ran back into the black reservoir.
So I fitted a small non return valve from ebay just after the reservoir in the plastic pipe to prevent this.
I had to clean the ink out of the pipe and the small valve that prevents ink running out if the head is taken out and the head as it was full of thickened ink.
Always keep your reservoir full of ink as when you get air into it the ink starts to thicken, as it should or it would be a moist copy, and clogs pipes and heads.
A print job once a week stops stagnation.

[@sushantbhoi6159]

thanks bro

[@RS-rm9sr]

Хорошего видео,
Многие жалуются поподания воздуха в систему, почему это происходит, и как избежать такой проблемы?
Это происходит у все принтеров hp SmartTank ?

[@dmousham00]

Eair nikalne ke bad lgane ke bad fir turant eair ban jata hai please help

[@pinglavlogs]

Air ka problem naya printer hp516 me ata hay kya

[@RKC2002]

Thanks bro

[@technostar1392]

Welcome

[@MANOJKUMAR-tj8jr]

Mera bhi ink tank printer se prinr nhi ho raha dukandaar kahta hai head change karne hoga
Kya kare

[@nakul6148]

Jab print hota h to black colour blue aa jata h kya problem hoga

[@AsharAlamSiddiqui]

Sir ink syringe se keechne k bad syringe nikalo to ink wapas tank me chala jata hai. Kia masla hai?

[@ProfGauraoSurkar]

Jar ink kr tap lagate hai tab fir se bubble hote hai and ink reverse jata hai

[@Sachin_Vallakati]

Bhai aapko koi solution mila kya iska?

[@aksalsabeeh]

I didi it differently
1- i prepared on my computer full page of one color,say cyan.
2- i make a cap with tube so that it fully cover the filling port without leak to pressurize it.
3- Simultaneously, i printed the cyan page while i mouth pressurize the color tank from the filling port, which pushed the ink and air into the print head.
That’s it

[@mahmouds12]

can u elaborate point number 2?

[@aksalsabeeh]

@@mahmouds12 i took a plastic bottle cap, big enough to cover the ink filling port. I glued a tube on it so that if i blow into it it will pressurize the ink tank for specific color. I placed the cap with rubber seal on the filling port in pressurized it while printing that same color. The pressure force the air out and fold some ink on scratch paper.
Then print as normal.

[@FarooqKhan-mw4wp]

@@aksalsabeeh I will try this method , but it looks dried ink pot

[@FarooqKhan-mw4wp]

i just clean the cartige with hot water, it started smoothly. thank you

[@hiteshgautam5373]

Pipe m air apke abhi bhi h cut krke lga re ho vdo

[@technostar1392]

Agar aapka air Rahega to usko pura nikal lo theek hai pura nikal Kar Hi chalu karna hai

[@bobbymishramusicalgroup8657]

Air problem के लिए printer क्या indication देता है.. Plz reply 🙏

[@technicalvk1801]

Yes

[@nicpic1950]

Jaise hi head lagaya fir se air aa jata hai

[@cksharmamgs]

Same problem main bhi face Kar raha hun 100 time try Kar Liya 🙃

[@ProfGauraoSurkar]

Mera bhi same pb hai

[@asingh1332]

@@cksharmamgs kaise theek hua

[@dbkillervlogs1120]

same problem

[@shubhamsonkar4430]

Mai bhi same problem