Це відео не доступне.
Перепрошуємо.
Bottom Job ✅
Вставка
- Опубліковано 20 сер 2022
- Billy talks bilge, we run into some communication issues, and the bottom finally gets a fresh coat of paint! Mountain Myst is starting to look mighty fine! If you missed any of our $100 boat refit series make sure you go back and get caught up so you know what she looked like before all our blood, sweat, and tears went into her ;)
Paints we used from TotalBoat bit.ly/TBTula
Running Gear Primer: "TotalProtect Epoxy Barrier Coat Primer"
Running Gear AF Paint: "Outdrive AF Prop and Outdrive Antifouling Paint"
Bottom paint we used: "Total Boat Spartan Multi season"
Do you want your very own Tula gear? Check out The Tula Shop! - tulasendlesssum...
Want a first look at our videos, up to date location information, and Tula Shop discounts? Become a Patron for all that and more! - / tulasendlesssummer
*Some of the links below are affiliate links and we may earn a small commission if you purchase something through the link.*
For a first-hand look at our favorite boating essentials, camera gear, safety equipment, navigation setup, dive equipment, suggested reading, and much more visit our Amazon Affiliate link. www.amazon.com...
Are you eyeing Sierra's leggings or Billy's board shorts?? You can find all our favorite Waterlust apparel here: bit.ly/waterlu...
Are you into the nitty gritty of how things work, product reviews, and the more technical side of boat life? Check out our other channel, Tula’s Tech Talk! - / @tulastechtalk
Can’t get enough of Jetty the Gypsy? She has her very own channel! Go Subscribe! / jettythegypsy
UA-cam is awesome but we are also on Instagram and Facebook. If you follow us on these platforms you are invited to Q&A’s, polls, and are often much more up to date on where we are!
Billy’s Instagram: @TulasEndlessSummer bit.ly/instabilly
Sierra’s Instagram: @TulasEndlessSummer_Sierra bit.ly/instasi...
Jetty’s Instagram: @JettyTheGypsy bit.ly/instajetty
Tula's Endless Summer Facebook: tulasendlesssummer
All of our most frequently asked questions are answered here:
tulasendlesssum...
A few of our amazing affiliate partners!
Waterlust - bit.ly/waterlu...
Siren Marine - bit.ly/SirenMar... Use code "Tula10" for 10% off at checkout
Raw Elements Sunblock - bit.ly/RawEleme... Use code “Tula” at checkout for 10% off!
Kiteboard, Wing, Foil, and Paddle Gear - bit.ly/Adventur... Use code "Tula"for 10% off!
Hobie Polarized - bit.ly/HobieShades Use code “HPTULA20” for 20% off!
All our music is licensed from Epidemic Sound www.epidemicso... unless otherwise noted here
#tulasendlesssummer #Trawler #boatrestoration
First page of my rule-a-matic bilge pump install manual, "no check valves". Boat builder installed one anyways and the bilge pump never worked reliably.
Ditto. I put one in the engine exhaust on one of my boats. Cost me about $6k. Expensive lesson.
Glad to see younger people with common sense and good work ethic. Boat looks beautiful
Watching her come back to life is so amazing, the two of you have an incredible work ethic.
Many women I have known would have done nothing but complain about the work Sierra is doing. Sierra is a great worker . You two make a top notch couple
Many women I know are better than men in practically everything. So I guess you just don't know the right women.
Billy's talents are unlimited!
Sierra, I'm just making fun, you know you rock!
You have to love a good edit.
Loads of men would complain just as much. Yeah. These guys are a great team.
Lol ~ truth, but does your wife of any female family read your comments.
All they have to do is look at your UA-cam channel.
I’m amazed at the level of knowledge these two young kids know in regards to redoing this boat. There not afraid to tackle anything.
Whom ever eventually buys this boat is going to have many hours of video to review and feel good about the job you have done. I have been impressed with your knowledge from the first video of this series. I also love seeing the Instagram videos of you enjoying your hard work.
She is looking amazing 👍. You two are a great team……and Sierra has such a great attitude about everything. 😎
She looks lovely. I can hear her saying "thank you"
Not into single hulls, but yall have done an excellent job, restoring the old tub back to life.
Something to do while waiting for your cat.
Great progress. I love your freshly painted bottom!🤣😂😅
You did such a great job on the bottom paint. 1st, I love the color, 2nd when you took the tape off of the waterline.... it looked SO nice! The Mountain Myst is looking so much better. Congratulations! Hard work pays off!
It is a pleasure watching Sierra crawling around in such tight locations. And by "pleasure," I mean I am so completely glad its not me in there!! Not even close to trying it anymore. Ah youth. Enjoy it while you can, both of you are so flexible and fit.
I am impressed by all the care you have put into the restoration
Have to admit I thought this was a bad idea. But of course I'm not them, so couldn't choose for them. But now it seems like a great idea. Mainly, cuz it got them back into the boating world, which is why most of their viewers subscribed. And, seeing the transition from something that was esthetically ugly to now almost esthetically gorgeous has been something to behold. You guys completely rock. :-)
Quite impressive, kids!
The hard work continues to pay off!!! What a gorgeous transformation!
Guys, you guys need to buy a communications set. These are great for setting the anchor, pulling the anchor, docking and leaving the dock, communicating from a stormy deck to the cockpit, and communicating through the hull. Get a set. You'll love them. You pay for what you get. Crappy units are cheap. Good, quality units cost good money. Spend the money and get a good set!!
Looks great. Don't forget to have some fun along the way. Projects like this can take a toll on most people.
The thinking that went into the bilge pump system is a credit to your ingenuity. Spot-on! Yes, by all means, clear out that sludge. It will also look better.
and paint it so it looks pretty and is easier to keep clean
Guys the boat is looking awesome
I hear jetty girl barking u r doing a good job 👍
How rewarding to pull the tape off...Wow..looks so good.
Neat solution for replacing the check valves with anti-siphon devices. Your knowledge and problem-solving (and problem-preventing) skills are impressive!
Watching you two put so much blood, sweat and tears into this huge project is amazing and both of your pure candor of it is so enjoyable to watch, no bs just the way it is. Looking good.
That boat look sooooo good
Respect for what you accomplish, greetings from the Netherlands
That extra pump on the timer is genius
I can understand being excited about a fresh bottom. 😊
We know you tired that's a lot of hard work and the two of you make a great team that thing looks like it's brand new. We know the video work is hard to do but don't keep us in the dark we just love watching you guys work hard it's entertaining and sometimes you get feedback from us as well that keeps you encouraged and working hard
I can’t wait to see a episode with your engine room and ford power plants. I did see the teaser 59 seconds. Lol👍
You can use a wet/dry vacuum to get the gunk out of your bilge, just add some water and stir it all up so the gunk is dispersed into the water and go to town with the vacuum😁
Both of you are super energetic, I don't know if I would have the drive to rehab an old boat when you have a new one being built.
Mountain Myst has captured my heart.💖
Fantastic. Awesome job. What a big transition. You guys should be so proud of your work.
They ought to make a pair of tapered flexible strips to fill the croove in the paint can with!
What I have always done in the past is take a flat screwdriver and punched it through the bottom of the lip in about four or five places. That allows paint that goes into the lip to drain back into the can, and doesn't interfere with the lid from sealing..
The troller looks amazing. The 2 of you do really good thorough work. You are definitely doing the defever justice. I've always liked trollers. Especially the older ones. Alot of manufacturers don't make boats like they used to.
Things look better all the time. You guys do great work.
Learn something everyday, today it was the rationale for anti syphon loops instead of check valves.
If it is not should be part of the standard checklist for marine surveyors it was added to our list.
Congrats Guy's on getting the Boat Bottom clean and Painted.. looking like a great Boat.. lv the views..
Looking GREAT guys!!! Hard work pays off!
Billie, she is really looking GOOD! (And the boat, too!) 😉
LOOKIN GREAT KIDDOS. Great work. Keep having fun.
WOW IT LOOK LIKE NEW BILLY. CAN'T WATE TO SEE HER AGAIN CRUSING IN THE WATER HEADING NORTH.
She looks wonderful! Great job!
Your videos bring moments of joy and angst recalling my boating experience the mid 80's through the mid 90's, owning 3 different trawler styles in various states of repair - but in all cases, there is always some level of maintenance required during the boat's life. Thanks!
I'm sure the skills came from all the work she has done. But Sierra seems to be skilled and has a happy work attitude. You are both doing a great job. Looks good guys.
Hay Billy you and your helper HA HA are doing a fine job......Keep the videos coming ok? I love it......
Love you both, congratulations on your progress, keep up the great work. 😎👍,things are looking great.👍
Each new video we get a new boat. Great Job GUYS
Tricks for keeping paint out of the can lid lip groove: I see you've in the past used the tape method - cover a part of the can lip with 2 pieces of tape to form a vee to pour over. I've sometimes had trouble getting the tape to stick well to the can lip. The other method is save a can lid off empty can and cut out a hole in center part (close to an edge) of the lid.. knock the lid onto the paint can and pour through that hole. Make the hole big enough for your brushes you might dip into the paint and can then scrape excess off brush against that hole in the lid. Hope I make sense and save someone some trouble of keeping paint or whatever out of the can lip.
It looks good, making progress, I know it’s taking longer than you thought, but you’ll be proud of it when it’s done
Looks good you just putting one thick coat or 2 👍👍👍👍
She looks beautiful guys. An awesome paint job!! 😊👌👌
Amazing comittment to bettering this boat, blessings...m
This.
This is why you can buy a discount hull with confidence. It's a matter of calendar management. Maybe capital management but that still a time a factor.
simply amazing transformation. Thank you both!
Just joined your crew. Jeannette and I have owned two trawlers over a 25 year period. The last was a 47 foot Tradewinds. We lived on it for almost 12 years. We spent most of our time on the east coast of the USA and months at a time in the Bahamas, mostly Exumas. We have since sold our big boat and own a waterfront home in the Florida Keys. We have been following you since your engine rebuild in the Caribbean. I love your passion and enthusiasm for the boating lifestyle.
I sometimes want to sell everything and move back aboard. We miss the lifestyle and numerous cruising grounds.
Question......We have looked and follow many blogs of Catamarans. When will your boat be done?
Thanks for the entertainment. We love watching you guys.
Jerry and Jeannette
Wow, I really like that green bottom paint. Nice work.
She has came along pretty quick
Such a great team
Walkie talkies can be handy when working on two different sides of a wall, hull etc...
Oh man, the thru hull split sequence had us laughing. 100% how parts of our refit are going!😂
Really good colour choice guys,looking excellent. Got to be happy at the result.
.... those are the best jobs, the ones you walk by and there is no mistaking that they are done, finito, and crossed off the list, and boo-yah! ..... at the start of the vlog, you showed the painted, all lookin good .. can you do a flickering thing that starts with what you started with and flickering that ends up with "good lookin" just an idea .... thx for sharing ... as always .. never quit dreaming, just dream bigger .. have fun be safe, save our oceans ....
Omg the communication breakdown through the throughholes was hilarious. You could have done a Seinfeld-tier comedy bit with that. Btw, why do they call it "muriatic acid" when it's just hydrochloric acid? I never understood that. Seems like you'd have to wait longer to get any appreciable help with the hard growth.
Muriatic acid is slightly weaker and has impurities...hydrochloric acid is stronger and pure.... So it's the same but different...
Can`t beat a clean bottom !
Good job guys xx
If only there were pocket devices/headphones for wireless communications. Lol
You two are doing great work! 😎
This is the kind of project that whatever the money put it, the resale value will be greater. All the bottom rudder work looks great. The whole boat is shaping up into something very fine.
We all love your videos and the boat is looking good 😊👍 🇺🇲
1.3K+ like, 8,495th view - congrats on getting to the clean bottom part. Looking good.
You guy's have an amazing amount of boat flipping skills, that's rare. Love the way you took this on, it's been a great adventure.
Even though I follow your Insta and have seen her in all her glory, I still come here to watch the process. I'm so proud to see such an unsightly forgotten boat restored. Great job kiddos. 💪
Love the color!! Thank you for sharing your progress!
If you have to change your pump that supplies water to the engine and Generator I find the best one is to use a swimming pool pump they're usually mostly plastic and they don't corrode and it gives you a strainer before before the pump
Great job guys! Amazing patience....
Great job on the prop’s 🛥
She is sooo pretty!!
What a transformation!
The boat is looking amazing.
Looking great guys
Amazing transformation!
I want to see this dadgum boat done. What you two have done so far is pretty amazing. I have to be a patient bear I guess!!!
That boat is looking great.
Awesome job
To quote Billy for many episodes. "That looks AMAZING". Awesome transformation. Well thought out bilge pump as well. She is sure looking good. Where is Jetty?. You both are such determined sailors. Not to bring up a sore subject, but any news on the cat build? Be well.
Looking really good, great job you two!
Great episode
I love the new bottom color!
WOW thats amazing, that bird shit really takes it to another level, na looks good. Doesnt look like a 100 dollar boat now. Well done
looks so Good
Excited for the aft deck paint! Bottom looks great 👍
You guys could easily make some serious profit when done. The boat is looking FANTASTIC ‼️ ‼️. Vinny 🇺🇸
An excellent video - as always! SUGGESTION: at the beginning of the video (3:54 - 4:-08) make sure your float switch is not underneath that cable/hose (red color, I think) or if you do get water in your bilge, you risk a malfunction of the switch.
Its looking good guys, congrats on a good job, wishing you continued success!
I believe the muriatic acid/non diluted hull cleaner works good for normal growth or soft growth. I had an unpainted hull on a 2006 Bayliner that I didn't clean it right off after the season. It took off all the soft growth right off without even needing to scrub or brush most of it. Hull looked brand new.
Looks so great! Thanks for sharing.
Love those colours.
Looking great!!!!!!
Great work guys! The boat is coming out to be great!!
Good progress, the boat is looking really pretty!