28 Gauge MEC 600 Jr. 2 3/4" to 3" Conversion

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 8

  • @toronadogofast7868
    @toronadogofast7868 Рік тому

    Was given a mec 650 that was hardly used but Sat for a long time. Took it completely apart and cleaned it. Removed the lower bolt and could not get The tower to come out. Had to spray it down and then used pry bars on it. Took about 3 hours of prying to break it loose. Cleaned it up and it was then loose in the channel. Go figure, but it will load 3" hulls now.

    • @bullet225ho
      @bullet225ho  Рік тому

      Sorry about the frustration. Get (or make) a spacer and you can then load 2 3/4 and 3" hulls.

  • @skydriver3113
    @skydriver3113 2 роки тому

    Great video, I've been enjoying your reloading videos. Especially the duplex loads. I plan to order from hawglips next year.

    • @bullet225ho
      @bullet225ho  2 роки тому +1

      Glad you like them. If time was free I'd make a bunch more....It's becoming reloading season for me now that I'm done with deer for the year.....so hopefully I can put a few more together.

  • @darkwater27
    @darkwater27 4 місяці тому

    hello and thank you for the video, quick question for you, once adjusted and using a short kit, do the de-primer/resizing thingy need to be adjusted when changing from 3 to 2 3/4?

    • @bullet225ho
      @bullet225ho  4 місяці тому

      There shouldn't be much changes that need to be made. Now You may always need to do minor adjustments to the sizing ring depth....but it should be ok.

  • @dave_in_az
    @dave_in_az 2 роки тому

    Nice video my friend!