PaintLine's Twirly & Pro Drying Rack: Spraying Milesi Wood Coatings

We updated our cabinet spraying system thanks to PaintLine's paint twirly & pro drying rack. We no longer have to bend over to spray to spray doors or drawers on the floor. Also we maximize space with the drying rack
/ brush-plus-roller-pain...

[@1painter4hire]

I'm really digging that little rack. Simple but perfect for a job site. Thanks for posting this Man 👍

[@brushplusrollerpaintingllc2537]

Whats awesome about it is that it unmounts with no tools & fits practically anywhere in the work van

[@1painter4hire]

@@brushplusrollerpaintingllc2537 yeah, I wasn't sure, but after seeing you with it , I need to grab one. Just saw it for like $165. I think. Thanks Again Sir.

[@r.guardia9107]

Nice spraying👍 I have a 2.5 gallon pressure tank with 25ft of hose. I just put a one gallon can inside with 2-3 quarts of material. It makes spraying a lot easier when the tank is remote and on wheels. You don’t have to carry around a two quart tank. Just a suggestion that might make things a little easier👍

[@paulforster7746]

Just sprayed a couple doors. Now I’m wondering how long until the overspray builds up on the turntable stand. making it a hassle to adjust pegs and rotate eventually?

[@ocuituco9]

Nice concept 👌 but to slow with the hvlp, to me is faster with the airless and paint vertical

[@virginiasilva308]

Great job!

[@nothingsimpostleble1593]

I have a question... how long do you typically wait to flip them?? I know you're going to say 4 hours, when they're dry, the next day... but even though the paint is dry , it hasn't cured fully so it's will still be soft...won't the little skinny metal things that its resting on leave indentations? is that why you're doing the back side first? I'm a painter too... I usually spray my door up with cup hooks and hangers. I can usually shoot 2 coats of shellac and 2 coats of finish in the same day... but my setup takes up a lot of space... also im always being careful not to leave runs... S&W Emerald loves to run and I could only imagine Benjamin Moore Advance with the 8hour dry time...i've never seen a painter use advance and spray the doors up in any video on UA-cam LOL so I would like to try this method.. I just worry about indentation because it hasn't cured all the way... any advice would be greatly appreciated

[@toddciarlone6721]

Switch to a 2k poly waterborne u can 2 coat one side, wait an hour and 2 coat other side

[@johnspanos3862]

Nice setup but you mentioned it's catalyzed and you're spraying without a respirator? That stuff releases isocyantes... I'm sure you're aware of the health implications of inhaling those when spraying a 2k product. Definitely mask up, even for spraying a demonstration video. Otherwise, good stuff and keep grinding.

[@acarlos744]

Always use respirator and gloves with all 2 k

[@jimfeaster4837]

I like had problem hearing name of sprayer?

[@ocuituco9]

HVLP Graco 9.5

[@jamalama5548]

That looks like a very narrow spray pattern.

[@toddciarlone6721]

How not to spray..nice booth to start , don't worry about the vocs the environment will absorb them , and the best part was that 4 " fan 🤦‍♂️

[@carloscabezas7899]

Buenisimo

[@larryhernandez2537]

What Graco hvlp 9.5 unit are you using, I like the pressure pot system you are using, did you purchase that separate, nice work.

[@brushplusrollerpaintingllc2537]

Hi Larry! Im using the Pro Contractor series, it doesnt come with the pressure pot so i bought it separately. Its actually the titan pressure pot. Buying it separately actually came out cheaper than buying the one that comes with the pressure pot

[@erikmeza1978]

Question where did you get those stands rack from ?

[@GQSHAUN]

Paint line