Never thought I'd find a fix for that error short of sending my Mini 2 to DJI or paying a dodgy individual to remote in and pair the hardware again...thankyou!!
My friend gave me his 2 Mini 2's to look at and one of them has same issue. Gimbal issue and errors although everything seems fine and mine gets stuck at 90% too when calibrating from remote. Does this take long, gonna try it in a bit? Glad it worked for you since same problem, would love to fix my friends drone :)
I followed all of your steps, but my calibration on the Mini 2 stops at 70%, not 90%. Standing it up does not progress it. I have a 40011 and a 40012 code.
ben mavic air 2 dronumu düşürdüm ve yeni kamera kablosu takmak zorunda kaldım. gimballıma yön verebilsembile görüntü alamıyorum. kalibrasyonları yapmama rağmen olmuyor. sizin önerebileceğiniz bir yöntem var mı acaba ?
Have you used FW 20.00.0600 on a Mini 3 Pro successfully ever?? I am on 01.00.0600 with ARB 6 so 20.00.0600 which is also ARB 6 seems the only option. But as soon as this calibration FW is flashed to the Mini 3 Pro my controller loses connection to the drone and it even cant be paired again. So I cant perform gimbal calibration with the calibration FW..
But I solved my problem with DJI Mini 2 SE. I had accidentally installed Mini 2 firmware. Mini 2's firmware ARB value is 4, mini 2 Se's is 3, so Mini 2 SE firmware is not loaded. Mini 2 firmware does not allow flying. Is there a solution to install Mini 2 Se firmware?
Hey. I bought a damaged mavic mini1. you can see that someone was messing with the gimbal everywhere. he's dead. can you help me somehow?i started the drone, there is an image, it turns on, but there is an error 40011. gimbal calibration. It can't be done. the motors do not run at all. there is silence.
My Air2s is on fw 02.04.2040. I want to keep this fw version and I have the calibration fw 20.04.2500. Will I be able to roll back to 02.04.2040, or do I need another calibration version? Thanks!
Hi, my Mini 3 Pro firmware is currently 01.00.0500 ARB 5. But I don't see any calibration firmware with ARB 5. Do I have to wait for it to release? Thank you!
@@DjiTeknikServis sıfır olarak aldığım dronu kumanda ile eşleştirdikten sonra yazılım güncellemesi uyarı verdiği için hem rc kumandayı hem dronu güncelle dedim. Güncellemeden sonra dronun gimbal ı kendi kendine titremeye başladı ve kamera görüntüsü gitti. Çözüm bulamıyorum
Hi, my Mini 2 is now on 01.03.0009, if I install 20.06.0200 for gimbal calibration, will I be able to go back to 01.03.0009 ? I'm afraid having problems with AntiRollback values.
@@DjiTeknikServis It worked ! Started from 01.03.0009 (ARB 1), flashed 20.06.0200 (ARB 1), calibration done and 40011 error gone, then succesfully reflashed back 01.03.009 and all worked fine. Thanks very much for your video
@@r.3424gdzieś tu nie rozumiem. Mam wersję 1.03.000. Mam ściągać plik do mnie flashowania 1.03.000 czy 20.06.0200? Po co on drogi raz na filmie flashiwal tą samą wersję? Może ktoś mi wyjaśnić jak to bezpiecznie wgrać. Jaki plike skąd je wziąć jak nie mam wykupionego dron hack? Czy to robić na win 10.
Selamün aleyküm, hocam Mini 2 drone var elimde ufak bir kaza geçirdi, orta kasa Flex değişti ve gimbal ayağı yapıştırıldi. Gimbalda başka bir işlem yok. Ucurudugum da drone sağa ve ya sola giderken farketmeksizin gimbal sağa doğru yatıyor. Kalibrasyon yapınca geçer diye duydum ama bu sefer de ekrana hata kodu düşüyormus çaresi nedir acaba
Merhaba, Air 2 gimbal değişmiş, 2. el aldım. Önceki sahibi 40011 hatasını giderememiş ama hata olmasını sevmiyourm. Ne yapaiblirim? 40 Euro istiyor burada da. Tek kişi için fazla ücret.
Turn off defender control and firewall completely. Install dronehacks 1.29 exe and dji consumer 2.10. If you continue to have problems, dm me and I'll help.
My dji mini 2 showing error 40011 and 40021 It's showing all this errors and it's flying is Altitude hold mode not going above 5m height and showing zero gps signals and sometimes gps signals go to 5-6
Hello sir. I have problem my mini 2. Then msg its appears incompatible gimbal data error. Can i get this firmware calibrate with you on version v70.00.0400? Please sir. Need help sir. Im from Malaysian country
Hello, Did you manage to do it successfully? I'm having problems after flashing V20.00.0600, the drone cannot connect to the remote even after re-pairing.
Download the dank drone downloader app. You can download the version that suits the ARB value of the device. I mentioned the arb values and service software in the video.
ola bom dia ... nao encontrei mais o dronehacks nesta versao 1.27. e nao consigo achar.. esta versão do driver que voce colocou ai 20.06.0200 apareceu ai na atualização logo no final
My computer simply does not find the mini2. Sometimes it says "an error occured, disconnect and reconnect the device". and nothing else... Can anyone help? Thanks
My dji mini 2 showing error 40011 and 40021 It's showing all this errors and it's flying is Altitude hold mode not going above 5m height and showing zero gps signals and sometimes gps signals go to 5-6 Please anyone help me 🙏
thanks, the error 40011 I managed to remove, now only error 40021 appears, I have the software, but it does not find the camera serial and does not continue, would you know how to solve this?
@@DjiTeknikServis the "Remove error 40021" when accessing it through cmd using the command with the right port, it does not find the camera's serial number
Never thought I'd find a fix for that error short of sending my Mini 2 to DJI or paying a dodgy individual to remote in and pair the hardware again...thankyou!!
Thank you friend! Today i fixed my Dji Mini 2 following this tutorial. Greetings from Chile.
somos dos jajjajaja de chillan
Which app you used ?
sOMOS 3, SOY DE TEMUCO
This worked great! Thanks........................... Fixed my Dji Mavic Air 2s.....Cool beans.
What firmware versions did u download please??
Bu tarz video larınız devamı gelmeli çok beğeniyorum
Thank you so much, i got stuck on 90% everytime and found your video after that. Thanks for this trick! Now everything works again 🤩
My friend gave me his 2 Mini 2's to look at and one of them has same issue. Gimbal issue and errors although everything seems fine and mine gets stuck at 90% too when calibrating from remote. Does this take long, gonna try it in a bit? Glad it worked for you since same problem, would love to fix my friends drone :)
bu tarz videoların devamını bekliyorum.
Excelente video, información completa y bien explicada, Saludos desde Colombia 🤝
Thank you so much for this Step by step tutorial!
huge thanks man i solved those error too
Çok Çok yararlı bir video olmuş. Eline sağlık.
Thank you very much, it worked perfectly, you have a new subscriber!!
Tam bunu arıyordum eyvallah kardeşim çok yardımc oldu
Works like charm! thanks man! DJI MAVIC AIR 2
Whic firmware
Which firmware please
That is the calibration version please
I followed all of your steps, but my calibration on the Mini 2 stops at 70%, not 90%. Standing it up does not progress it. I have a 40011 and a 40012 code.
Man you're the Best you save my Mini 2
I fixed it successfully, thanks you very much. ❤
Bạn ở đâu cho mình sdt đc ko
@@thuylieu1296 mih sửa flycam ở Nhật b nhé!
merhaba arkadaşlar. mini 2 se için kullanmanız gereken yazılım 20.00.0420. sonrasında yine en güncel yazılımı yükleyebilrsiniz. %100 işe yaradı.
Is the Mavic 3 enterprise currently supported?
great .work.👍
Thank you very much for helping me, this is not a scam !!!
Thats was super easy, thanks. It worked.
ben mavic air 2 dronumu düşürdüm ve yeni kamera kablosu takmak zorunda kaldım. gimballıma yön verebilsembile görüntü alamıyorum. kalibrasyonları yapmama rağmen olmuyor. sizin önerebileceğiniz bir yöntem var mı acaba ?
todo bien mini 2, pero al activar los motores el gimbal se queda quieto y no estabiliza, tube que actualizar al la version mas reciente de dronehacks.
QUAL FIRMWARE PARA DJI MINI SE...MEU ESTA FIRMWARE 01.02.000...DA AERONAVE
Bunu öğrendiğim çok iyi oldu takipdeyim
Gimbal calibaration how to do ? Thats is mobile screen recording or your laptop?
dji fly app gimbal calibrtion
@@DjiTeknikServis what about Dji assistant2 cunsumer drones ?
Or downloud both .
Dji gimbal celibration app i did not found ?
After updating your device to the service version, you need to calibrate the gimbal via the DJI Fly app on the phone. Watch the video more carefully.
@@DjiTeknikServis dji fly app is which I used fly drone and take shots?
yes@@caalinAbyan
Hello. Do you know how to disable the remote control binding check?
Have you used FW 20.00.0600 on a Mini 3 Pro successfully ever?? I am on 01.00.0600 with ARB 6 so 20.00.0600 which is also ARB 6 seems the only option. But as soon as this calibration FW is flashed to the Mini 3 Pro my controller loses connection to the drone and it even cant be paired again. So I cant perform gimbal calibration with the calibration FW..
But I solved my problem with DJI Mini 2 SE. I had accidentally installed Mini 2 firmware. Mini 2's firmware ARB value is 4, mini 2 Se's is 3, so Mini 2 SE firmware is not loaded. Mini 2 firmware does not allow flying. Is there a solution to install Mini 2 Se firmware?
Hey. I bought a damaged mavic mini1. you can see that someone was messing with the gimbal everywhere. he's dead. can you help me somehow?i started the drone, there is an image, it turns on, but there is an error 40011. gimbal calibration. It can't be done. the motors do not run at all. there is silence.
My Air2s is on fw 02.04.2040. I want to keep this fw version and I have the calibration fw 20.04.2500. Will I be able to roll back to 02.04.2040, or do I need another calibration version? Thanks!
If you have a dronehack license, you can revert to the 2040 version.
Great! Thank you. Just did it this morning. Everything is all good!
hi .how can we know the calibration version for example mavic air 2?thanks sir
I also need same on the air2
Same question
How about dji min 3 (not pro) and mini 2SE?
Hello! For mini 2 firmware 01.05.0000 what debug firmware is needed?
You can use either 70.00.0400 or 70.00.0500.
@@DjiTeknikServis Thank you )))
@@DjiTeknikServiswhat of mavic air2
BUNU ÖĞREN DİĞİM ÇOK İYİ OLDU GERÇEK TEN
thank you so much ❤❤❤❤❤
nice video, what firmware version is for mavic air 2? thanks
Hi, my Mini 3 Pro firmware is currently 01.00.0500 ARB 5. But I don't see any calibration firmware with ARB 5. Do I have to wait for it to release? Thank you!
yes
hocam benim mini 3 pro da gimbal hatası veriyor. yapamadım bi türlü. siz çözüm bulabildinz mi
@@himmetbuke7397 tabi yardımcı olayım.
@@DjiTeknikServis sıfır olarak aldığım dronu kumanda ile eşleştirdikten sonra yazılım güncellemesi uyarı verdiği için hem rc kumandayı hem dronu güncelle dedim. Güncellemeden sonra dronun gimbal ı kendi kendine titremeye başladı ve kamera görüntüsü gitti. Çözüm bulamıyorum
Thanks for your helpful videos, but my device is mavic air2 and I can't remove this 40011 error from it! Would you please help me?
Hi, thanks for sharing this nice video. Is it also work for Mini 3 Pro after parts replacement?
evet çalışır
@@DjiTeknikServis Hello. I cannot download firmware. I don't know but why. Thanks. Andrew
how about dji mini 3 old gimbal calib the same issue with this tool?
Mini 3 models work smoothly with the latest update file.
Que licencia tengo que comprar para hacer ese procedimiento?
Do you know what is the firmware of Dji mini SE for calibration?
On devices with an arb value of 2, you will use version 70.00.0002.
Hi, my Mini 2 is now on 01.03.0009, if I install 20.06.0200 for gimbal calibration, will I be able to go back to 01.03.0009 ? I'm afraid having problems with AntiRollback values.
no you can't go back
@@DjiTeknikServis It worked ! Started from 01.03.0009 (ARB 1), flashed 20.06.0200 (ARB 1), calibration done and 40011 error gone, then succesfully reflashed back 01.03.009 and all worked fine. Thanks very much for your video
@@r.3424gdzieś tu nie rozumiem. Mam wersję 1.03.000. Mam ściągać plik do mnie flashowania 1.03.000 czy 20.06.0200? Po co on drogi raz na filmie flashiwal tą samą wersję? Może ktoś mi wyjaśnić jak to bezpiecznie wgrać. Jaki plike skąd je wziąć jak nie mam wykupionego dron hack? Czy to robić na win 10.
Hello. I cannot download firmware. I don't know but why. Thanks. Andrew
buenas alguno necesito ayuda con la solucion de error 40011 de dji mini SE alguno sabe cual es el numero de firmware .. gracias de ante mano..
Selamün aleyküm, hocam Mini 2 drone var elimde ufak bir kaza geçirdi, orta kasa Flex değişti ve gimbal ayağı yapıştırıldi. Gimbalda başka bir işlem yok. Ucurudugum da drone sağa ve ya sola giderken farketmeksizin gimbal sağa doğru yatıyor. Kalibrasyon yapınca geçer diye duydum ama bu sefer de ekrana hata kodu düşüyormus çaresi nedir acaba
gimbal ayarlarında fpv mode açık kalmış olabilir mi ?
kalibrasyon yapılır hata koduda silinir sorun değil o
@@DjiTeknikServis yok hocam takip modunda , fpv modda olsa bile tek yöne yatıyor hocam gimbal + düz giderken rüzgarla beraber video sağa sola oynuyor
@@DjiTeknikServis gönderdiğim yere gimbal ayağını değiştirelim dediğimde yazılım atılması gerekiyor ben yapamam demişti, yazılım vs atmamış sanırım
tamam sorun değil yardımcı olurum.
Interessado, valor?
Hi will this firmware also get rid of 10016 & 10017 errors in Mini3 Pro? Thanks
what I tell in this video is only for 40011 error and calibration.
Hi..i have problem gimbal dji mini 3, how to calibrate gimbal??
Merhaba, Air 2 gimbal değişmiş, 2. el aldım. Önceki sahibi 40011 hatasını giderememiş ama hata olmasını sevmiyourm. Ne yapaiblirim? 40 Euro istiyor burada da. Tek kişi için fazla ücret.
videodaki işlemleri yaparak hatayı silebilirsiniz.
Calibration firmware bulamadım hocam. Sizde var mı?@@DjiTeknikServis
www.dankdronedownloader.com/dddupdate/v3/DankDroneDownloaderN.exe @@thedev2183 bu linkten uygulamayı indirip satın alabilirsiniz.
Hocam 1.5 USD yükleme yerini buldum. İşten sonra deneyeceğim bugün. Teşekkürler. DankDrone Downloader indirince oluyormuş. Sitede çıkmıyordu. Programı indirmek gerekiyormuş.
Bir sorum daha vardı. 40011 hatasını giderdim ama 10017 ve 40021 hatası gitmedi. Bunları nasıl yapabilirim? DJI Air 2
@@DjiTeknikServis
I cant inatall a firmware. I'm on 1.03.0009.. everthink works, but cant flash or reflash firmware.. can u give me a tip how to fix that ?
Turn off defender control and firewall completely. Install dronehacks 1.29 exe and dji consumer 2.10. If you continue to have problems, dm me and I'll help.
eyvalla super olmus,.Benim Mavic 2 kazadan sonra gimbal degisstirdim,simdi acilista gimbal donmuyor.Ptz kablodandir dusundum ama malesef yine ayni.Normalde telefondan baglandimda kamerayi goruyom,bii yardimci olurmusunuz,neden olabilir acaba? Simdiden tesekurler.
gimbali değiştirdikten sonra repair tools yazılımı ile kalibre edilmelidir. kalibre edildiği halde çalışmıyorsa aldığınız ürün arızalıdır.
@@DjiTeknikServis USTAD repair tool yazilimini nereden bulabilirm ,bi yardmci olsaniz? Bizim Bulgaristanda servisler malesef komple kamera ve gimbal degistirmek istyorlar, oylede cok pahali oluyo.
github.com/Judslat/NewGimcal/archive/refs/heads/main.zip
ua-cam.com/video/ZPRIk1murgA/v-deo.html
indirmeniz gereken dosyayı ve nasıl kullanılacağına dair gereken videoyu yorumlara ekledim.
Mini 2 Se aldım 1 ay oldu herhangi bir kaza olmamasına rağmen 40011 hatası aldım durduk yere bu neden olmuş olabilr yardımıcı olabilir misin ?
Videodaki işlemleri yapsam garanti dışı kalır mı cihazım ?
hayır garanti dışı kalmaz
cihaz yazılım sürümü nedir ?
Son sürümü güncellemiştim 30.000 galiba sonu emin değilim cihaz da ulaşamım yok şuanda
Does this solve the gimbal tilt problem?
yes
@@DjiTeknikServis thank you so much I fixed it
Dji air 2s what fw? Thanks you!
???
What is the drone version?
@@DjiTeknikServis firmware of mavic air2s version is 02.04.2500. What firmware should I download to fix error 40011? Thanks you.
@@NhanHuynhphuoc 20.04.2500
Do you know how to remove 10016 error o mavic air 2s?
mil gracias
My dji mini 2 showing error 40011 and 40021
It's showing all this errors and it's flying is Altitude hold mode not going above 5m height and showing zero gps signals and sometimes gps signals go to 5-6
Hocam flashing faild hatası alıyorum hiç bir şekilde çözüm bulamadim
hello. do you have a software for error 40021?
How to determine the arb
Tengo un dji mini 3. Con el error 40011. Alguno pudo resolver el problema?
Do you know which is the mini 3 pro firmware?
Which version are you asking for?
@@DjiTeknikServis 01.00.0500 arb1. Do you have the firmware to calibrate it?
@@xyzbye2285 Calibration file not available for that version
Hello sir. I have problem my mini 2. Then msg its appears incompatible gimbal data error. Can i get this firmware calibrate with you on version v70.00.0400? Please sir. Need help sir. Im from Malaysian country
For mini 3 pro v01.00.0600 ???
20.00.0600 maybe it's this version i'm not sure.
@@DjiTeknikServis i will test . Thanks
Hello, Did you manage to do it successfully?
I'm having problems after flashing V20.00.0600, the drone cannot connect to the remote even after re-pairing.
I had the same problem...obviously this 20.00.0600 FW is crap...
How can I get the error file?
Where Can I Find the calibration firmware to air 2s?
Download the dank drone downloader app. You can download the version that suits the ARB value of the device. I mentioned the arb values and service software in the video.
Where can you download the app. On the website I don’t see any of these 20.04.2500 fw???
Can you share fireware plz
mavic air 2 has error 40011 code, if i pay for the V20.01.1200 Calibration firmware, need to have a license on drone hack too?
no need not
@@DjiTeknikServis thanks for response, i'll download that calibration firmware to fix error code
@@DjiTeknikServis thank you, it was successful, the 40011 error code was eliminated...the remaining is IMU error code,
where to download the firmware mavic air2S v20.04.2500 calibtate?
dank drone downloader
@@DjiTeknikServis There is a 2500 sustem bin firmware but there is no calibrate version
I can't buy it from Russia, this firmware
It is available on the dank drone app as 20.04.2500 and you can buy it with visa or master card.
@@DjiTeknikServis I did it all right, thank you👍🏼
ola bom dia ... nao encontrei mais o dronehacks nesta versao 1.27. e nao consigo achar.. esta versão do driver que voce colocou ai 20.06.0200 apareceu ai na atualização logo no final
boa amigo. é outro software usado. o dronehack e só pra instalar a firmware. se quiser eu posso conseguir pra vc. so que e pago.
Hi, can you share the software with me please?
what about air 2?
i have errors showing after replace the gimbal set
kindly tell me which version can fix this
which version are you using?
@@DjiTeknikServis latest firmware, V01.01.1300
@@nurealahisagor3317 V20.01.1200 Calibration firmware.
there is nothing like this version
where i can download that?
@@nurealahisagor3317 After paying the fee, you can download it with dankdronedownloader.
after install Gimbal Calibration Firmware i try calibrate gimbal in dji fly app but at the end it says calibration not proper :/
Do you do vertical calibration when it reaches 90% level?
@@DjiTeknikServis thats it! now is ok thank you very much :)
hola consulta me sirve para borrar cod 10016 de mavic air 2s
You cannot clear error code 10016 or 10017. for this you need dji ad accoun and vpn. It is a program given only to authorized services.
My computer simply does not find the mini2. Sometimes it says "an error occured, disconnect and reconnect the device". and nothing else...
Can anyone help? Thanks
I fixed it. Thanks for this video :D
How to download this file
How can i download Air 2s firmware 20.04.2500 Version on windows
I don't know how to send it to you
Hi I did all the steps as described but whe I wabt to do flash it says that flash failed, i Ty several times but it wont let me do it
What is the drone model and software version?
@@DjiTeknikServis drone is DJI MINI 2, Software 01.07.0200, Drone Hack v.1.31
Use dji assistant 2 consumer version 2.1.0 and dh hack version 1.29. Turn off defender and firewall.
Can you send me the download links for these versions?
My dji mini 2 showing error 40011 and 40021
It's showing all this errors and it's flying is Altitude hold mode not going above 5m height and showing zero gps signals and sometimes gps signals go to 5-6
Please anyone help me 🙏
Can you guide me with mavic air 2?
yes
Bu nedir dostum
Facing problem with air 2s error code showing 10016. please help
Unfortunately, dji authorized services can solve this problem.
Work for error 40021?
no this video for 40011 error. Special software is required for error 40021.
mavic air 3?
I have download the same firmware, but failed to flash
Turn off defender and firewall. Install dji consumer and restart the computer. then try to install the software again.
@@DjiTeknikServis dji consumer? Do you mean dronehack?
No install software with dronehacks after dji assistant 2 consumer install.
@@DjiTeknikServis IT WORKS. THANK YOU VERY MUCH. YOU GOT MY SUBSCRIBE
free?
my drone dji mavic air2
problem code 30067
You can try disconnecting the drone from the computer
как оплатить если нет pay pal
Мой друг может платить только через PayPal.
Thank you SOOOO VERY MUCH!!! Was able to clear error 40011 from my air 2s 👍👍👍
what firmware you download for your AIR 2S?? Im looking the calibration firmware for the Mavic air 2. thanks for your help.
@@Toys4boysDrdrone 02.04. 2500 calibration version.
@@koonley thank you!!! This version works with mavic air 2??
@@Toys4boysDrdroneno. This version is for Air 2s only. Check your firmware version number and see if there is a calibration version of it.
@@koonley thanks, but i cant find anything 😢
Can somebody send me this firmware?
I have,that
thanks, the error 40011 I managed to remove, now only error 40021 appears, I have the software, but it does not find the camera serial and does not continue, would you know how to solve this?
what software are you using?
@@DjiTeknikServis the "Remove error 40021"
when accessing it through cmd using the command with the right port, it does not find the camera's serial number
share mini 2 firmware please
You can download it via dank drone downloader.
Do you know where I can get the software to fix error 40021?
Thanks in advance, and fantastic tutorial!!
Message me, I'll help.
+905396544882
@@DjiTeknikServismsj
Please delete that video, you make us lost a lot of money. It is business. You also can sell firmware online for more income. 🙏🙏🙏
Better than all of your useless crappy Videos...
Hi i want to contact you for a small detail Is there any possible way i can contact you
wp: +905396544882
mail: djibakimonarim@gmail.com