Culvert Pipe Install on a Friday Afternoon

Поділитися
Вставка
  • Опубліковано 12 гру 2024
  • Installing a Culvert Pipe for a Field Driveway w/ Mini Excavator and Bobcat. We are in a hurry to install a 10"X30' culvert pipe in the road ditch for a field driveway before an upcoming rainstorm. Using a John Deere 35G mini-excavator, a Bobcat S650 skid loader, Ford F-750 Dump Truck and John Deere 310SE backhoe, we quickly work to try to get a new culvert pipe installed late in the day on a Friday afternoon. This culvert pipe installation provides easy entrance into a farm field for the farmers with big equipment. This finished job turns out really nice. Cool drone shots included.

КОМЕНТАРІ • 95

  • @eliteearthworksllc
    @eliteearthworksllc 4 роки тому +4

    Nice work! Always fun working in the rain. Great job! 👍🏻

    • @digdrivediy
      @digdrivediy  4 роки тому

      Hey Thanks! Rain jobs really make you appreciate enclosed and heated cabs! Thanks for checking out this video Brandon. Appreciate the feedback.

    • @eliteearthworksllc
      @eliteearthworksllc 4 роки тому +2

      Neil Koch yes they do 😁 you bet you’ve got some great content. Like that ford dump truck

  • @aaronburford5701
    @aaronburford5701 2 місяці тому

    I specifically rewatched this again, this where I became a true fan of the way you complete projects, attention to details, etc.

  • @williamsdomanika
    @williamsdomanika 3 місяці тому

    This is the perfect video!!! I bought 36 acres of land and have been trying to find a visual for filling that ditch to create a driveway!!! My older bothers and I will DIY this. No permits! Thank you

  • @aaronburford5701
    @aaronburford5701 6 місяців тому

    This is the BEST step step process on how to install! Very efficient, clean and organize.

    • @digdrivediy
      @digdrivediy  6 місяців тому +1

      Glad you think so Aaron!

    • @aaronburford5701
      @aaronburford5701 6 місяців тому

      @@digdrivediy when the paint gun is used to get grade and the excavator cuts in the topsoil so accurately I know you are leading the process! So impressed!

  • @aaronburford5701
    @aaronburford5701 9 місяців тому

    Rewatched again for the simple purpose of watching your organized process of getting completed. This video shows the most efficient way tk instal a cukvert!

  • @aaronburford5701
    @aaronburford5701 Рік тому

    I have viewed alot of culvert installs and everyone has their own process of doing it..if... I swear the way this one was done had to be the most organized, efficient and cleanest way of getting done...Neil and his vision for projects to be done is on another level!

  • @aaronburford5701
    @aaronburford5701 Рік тому

    Your projects are alwys so neat and clean while working them. Its impressice to see your organizational skills!

  • @aaronburford5701
    @aaronburford5701 10 місяців тому

    Rewatching again! Your process is the most efficient and organized i have seen to install a pipe. The best!

    • @digdrivediy
      @digdrivediy  10 місяців тому

      I wish I was better at making videos back then!

    • @aaronburford5701
      @aaronburford5701 10 місяців тому +1

      @@digdrivediy The video was good, I was SO impressed with the organization of everything. You always seem to have everyone and everything in order! Great Job!

  • @aaronburford5701
    @aaronburford5701 Рік тому

    Your attention to details in your projects is a great example to follow sir! Thanks for sharing!

  • @aaronburford5701
    @aaronburford5701 Рік тому

    Your attention to detail in your projects are second to no one! Exceptional work!

  • @silentepsilon888
    @silentepsilon888 4 роки тому +3

    nice to have a yard at home with pipe and gravel and who knows what else that you might need to finish a job. Comes to show, always save everything, no matter what others say, save it, save it, save it. Loved the music in the video too!

    • @digdrivediy
      @digdrivediy  4 роки тому +1

      I can tell you and I are on the same wavelength, although my wife would tend to disagree with us both. The older I get, the less I tend to save but when it comes to stuff like this, I'll always find a place to stash it so that it might find a new use in a different project. I try to re-purpose and reuse whenever possible. Thanks for mentioning the music. I always wonder about that but nobody mentions it. I spend an embarrassing amount of time trying to figure out the music. Thanks for watching!

  • @aaronburford5701
    @aaronburford5701 11 місяців тому +1

    I have watched this again and have been mzed about how neat of a job it was.... I saw the spray paint and new the deails would be ofd rhe charts! You are the best!

  • @berniemeehan9214
    @berniemeehan9214 Рік тому

    That was a top notch job and in such short time frame even more impressive. Well done!

  • @aaronburford5701
    @aaronburford5701 6 місяців тому +1

    This is how I know Neil is about attention to details, he used the grade stick to get the correct amount topsoil off for the culvert pipe.... I have yet to see anyone else so do that!

  • @AaronSchaefer1
    @AaronSchaefer1 4 роки тому +5

    That was incredible that you were able to push that dump truck out of the mud...... Great work!!

    • @digdrivediy
      @digdrivediy  4 роки тому +1

      I am strong like bull. I enjoy your comments. Keep em coming!

  • @aaronburford5701
    @aaronburford5701 2 місяці тому

    The best culvert install on UA-cam sir!

  • @aaronburford5701
    @aaronburford5701 6 місяців тому

    Rewatched, my 4th or 5th comment! This is rhe best install on UA-cam! So organized, so clean, grear process! The Master of Dirt Work!

  • @bigchuckyinkentucky6267
    @bigchuckyinkentucky6267 3 роки тому +2

    In KY. you call your local state highway dept. garage. They send someone out and look at where you want the entrance. They will then tell you the size pipe required for that spot. You go get the pipe and bring to the site. They then come and install it with their equipment and gravel. From that point on you are no longer responsible for it. EVER. They told me this is due to liability for accidents if someone leaves the road and hits the end of the pipe. Oh yeah, if it ever needs replacing, everything is on them. Pipe and all. Great work and love the videos.

    • @digdrivediy
      @digdrivediy  3 роки тому

      Man, that would be nice! Makes sense to me. Not so much here in Indiana.

  • @TheHobbyShop1
    @TheHobbyShop1 2 роки тому +1

    You guys made short work of that and it looks to drain much better. As you indicated a clear out further down the ditch would get it the rest of the way there.

    • @digdrivediy
      @digdrivediy  2 роки тому

      Thanks Hobby Shop! Yeah. It works slowly but could stand to be dipped out.

  • @Steelviper61
    @Steelviper61 2 роки тому +1

    Great job, and great video!

  • @heartland96a
    @heartland96a 4 роки тому +1

    A little freshening of the ditch , slope of the ground limits just how much you can do , it's better and that's what matters of course .

    • @digdrivediy
      @digdrivediy  4 роки тому

      And now it's all grown back in and you can't hardly tell. It worked well this summer. Thanks for watching!

  • @edsecorr7812
    @edsecorr7812 2 роки тому +1

    Great job love your videos

    • @digdrivediy
      @digdrivediy  2 роки тому

      I'm grateful for your comments Ed!

  • @DonDomel
    @DonDomel 8 місяців тому

    fantastic !

  • @teamhomemadewoodwork837
    @teamhomemadewoodwork837 3 роки тому +1

    nice work!

  • @1ton4god
    @1ton4god 4 роки тому +1

    As always gave you a thumbs up! Love your videos buddy!

    • @digdrivediy
      @digdrivediy  4 роки тому

      And always glad to read your comments Marsh Monster. Thanks so much for supporting the channel it means a lot to me. Take Care!

  • @stevesmith-wc2gb
    @stevesmith-wc2gb 4 роки тому +2

    I would be having me a mini led light bar on that equipment

    • @digdrivediy
      @digdrivediy  4 роки тому

      That's not a bad idea. Never hurts to be more visible. Thanks for the idea!

    • @stevesmith-wc2gb
      @stevesmith-wc2gb 4 роки тому

      @@digdrivediy it's no problem I'm always full of ideas like that wish they come standard on lawn mowers and tractors

  • @PatrickWagz
    @PatrickWagz Рік тому

    nice!!

  • @johnhamilton9229
    @johnhamilton9229 3 роки тому +1

    Playing with lasers. Sometimes you can still be a kid.

    • @digdrivediy
      @digdrivediy  3 роки тому

      Try to let my inner child out to play once a week at least!

  • @scottsoper
    @scottsoper 2 роки тому +1

    This is 6/20/2022 How has the install been working out? I speculate that that ditch in front of the house causes trouble when mowing. Could a culvert pipe be installed from the farm field entry past this property so the lawn could be level with the road. That would improve the mowing but would it cause other problems?

    • @digdrivediy
      @digdrivediy  2 роки тому +1

      The culvert is holding up great! We shaped up a little bit of the edges so that it's easy to mow and they keep it looking beautiful. Wish I could attach a picture cuz I am sitting inside the office right in front of it.

  • @geneduclos4003
    @geneduclos4003 Рік тому

    Just curious, are you still using a the Lenker rod, and, if so, how do you like it.

  • @noahgoyette467
    @noahgoyette467 4 місяці тому

    any reason there is no "bedding" underneath other than the soil?

  • @bushmannevkoch9907
    @bushmannevkoch9907 4 роки тому +2

    I'm a retired contractor for civil construction and concrete contracting building and civil. Here in Australia they stopped using corrugated pipe due to the acid in the soil eating away the pipe.

    • @digdrivediy
      @digdrivediy  4 роки тому +1

      Greetings! Nice to meet a Koch from Australia! That's a good point. Old habits die hard because this pipe will likely corrode eventually as well but should be good for 40+ years I'd think. We use plastic pipe oftentimes when the application calls for 12" or larger because then the pipe is available in the stronger dual wall. This job could have been a candidate for 10" PVC I suppose but that is more pricey. For longevity sake, we probably shouldn't use the galvanized corrugated pipe anymore either. Thanks for commenting and for subscriping. I really appreciate it.

    • @ronaldlee2376
      @ronaldlee2376 2 роки тому +1

      The limestone used to cover galvanized culvert will destroy it. Surprised you did not use ADS which will far outlast steel. This is all we use for past 35 years.

  • @Natural-Causes
    @Natural-Causes 11 місяців тому +1

    What is the payload capacity for your dump truck? Do you need a CDL to drive that size truck?

    • @digdrivediy
      @digdrivediy  11 місяців тому +1

      This truck is plated at 33,000 lbs gross vehicle weight. I can haul about 20,000 pounds of material. Yes, you need a CDL for anything over 26,000 GVW.

  • @kirstenmoses6748
    @kirstenmoses6748 3 роки тому +1

    Any idea what the weight capacity is for something like this? I have a small ravine I need to get a culvert on to continue my driveway. The problem is I need a 40-50 ton capacity culvert because we are building a new home on the large property and concrete trucks need to be able to cross. Let me know if you have any ideas, thanks!

    • @digdrivediy
      @digdrivediy  3 роки тому

      Hi Kristen. A steel culvert like this one when backfilled with all stone will support your concrete trucks and dump trucks no problem. You need to be sure that any soft material like topsoil is removed in order to support the new material to be added to the top. Just like we did in the video. Thanks for watching and good luck with your project!

  • @DrewWest535
    @DrewWest535 2 роки тому +1

    Neil I love your stuff man, but your audio difference between you music and mic is a shocker sometimes when I turn it up to hear you and the awesome music comes blaring in.. 😅 🤟
    I love your vids though, keep up the great work, you're great at telling meaningful stories and life lessons.

    • @digdrivediy
      @digdrivediy  2 роки тому +2

      Yeah, sorry about that. This was an earlier video and I was still figuring that stuff out. Well, I'm still figuring out to this day as well 😜. Thanks for the nice comments though and thanks for watching!

  • @benhogan6987
    @benhogan6987 4 роки тому

    Can you give me some info on that stick you use for your lazer head? Noticed you slide your lazer up and down, have never seen anything like that before.

    • @digdrivediy
      @digdrivediy  4 роки тому +1

      I'm glad you asked Ben. I don't see too many people using these but I have been around them since the late 90's. They are great and I always prefer them to the more common fiberglass telescoping pole. It's called a "lenker rod", or some people call them a "Direct Reading" laser rod. You can move the tape inside the rod up and down and set grade, then slide the receiver up and down to get a reading and it works great when you're dealing with lots of cut and fill. I've always wanted to make a video about it cause seems like most folks just aren't familiar. Thanks for asking and thanks for watching! Here's a link to the one I have. They are pricey, but once you use one you won't like that fiberglass pole!
      www.engineersupply.com/laserline-10-foot-direct-reading-laser-rod.aspx?VariantId=61a22ca7-7e5f-4444-9f9e-a26992258dab&gclid=CjwKCAiA25v_BRBNEiwAZb4-Zf8hT-mVZWeBYZm2MtsOUsw_blSlBOUW8XIi1jjyGgaaDhQtR7AK_BoCmREQAvD_BwE

    • @benhogan6987
      @benhogan6987 4 роки тому

      Thank you...yes it looks like an awesome tool once you become familiar

  • @kidonfarm
    @kidonfarm 3 роки тому +1

    Do you need a CDL license for that side of the truck i’m looking to upgrade to a bigger truck like that just wondering

    • @digdrivediy
      @digdrivediy  3 роки тому

      For this truck you technically do need one since it has a GVW of 33,000 pounds. There are some F650 trucks out there that look similar with a 26K GVW that you don't need a CDL for though, so that might be a better choice. Thanks for watching!

  • @afkjryt
    @afkjryt 3 роки тому +1

    Do you need a CDL for the F750..?

    • @digdrivediy
      @digdrivediy  3 роки тому

      Technically yes, for this 33,000 GVW Dump truck you would need a CDL to operate it at it's full capacity. There are F650s and some F750s that are 26,000 GVW in which you would not need a CDL. Fortunately for me I was obsessed with the idea of getting my CDL right as I turned 18 so I got it way back when. I've always been glad to have it.

  • @edwingrimm9183
    @edwingrimm9183 2 роки тому +1

    how much rock can you holl in that truck

    • @digdrivediy
      @digdrivediy  2 роки тому

      10 ton legally. You could probably fit 12 in there if you heaped it up.

  • @codyturner2590
    @codyturner2590 2 роки тому +1

    What laser do you have

    • @digdrivediy
      @digdrivediy  2 роки тому +1

      It is a topcon. I don't think they make it anymore though.

    • @codyturner2590
      @codyturner2590 2 роки тому

      @@digdrivediy awesome thanks just bought one also do you sell your hats

    • @digdrivediy
      @digdrivediy  2 роки тому

      @@codyturner2590 We have sold several rounds of hats. I have a few left of a different style. You can email me at digdrivediy@gmail(dot)com if you're interested. Thanks so much for the interest! 👍🏻

  • @dadsexcavation3498
    @dadsexcavation3498 2 роки тому +1

    What’s the dimensions on your bed

  • @joe_smalls
    @joe_smalls 4 роки тому +1

    How big is that pipe?

    • @digdrivediy
      @digdrivediy  4 роки тому +1

      Hey Joseph! The pipe we used for this culvert was 10". Thanks for checking out the video. Take care.

    • @joe_smalls
      @joe_smalls 4 роки тому +1

      Thanks! I’ve got a similar project coming up. I thought the pipe was bigger

  • @hartiwi5382
    @hartiwi5382 3 роки тому +1

    43

  • @tonyfreehauf4463
    @tonyfreehauf4463 Рік тому

    good job ... wish you where not using a mac ... ha ha ... OldTony

  • @ZeroFloat.
    @ZeroFloat. 4 роки тому +1

    I am not an expert but they say gravel is not a good material to cover culvert. It should be something that resist water goes past culvert inlet.

    • @digdrivediy
      @digdrivediy  4 роки тому +2

      Glen, you've got a good point. Gravel wouldn't be my first choice either and this is an opportunity for me make a distinction between gravel and crushed limestone. Around here, the term "gravel" refers to stones that are harvested from a pit in the ground and sorted by size. These are usually round rocks found in sandy glacial deposits and when sorted out by size they will not pack together, but rather allow water and air to penetrate between the spaces of the individual stones (sometimes referred to as "river rock"). You're right that this would not be a good choice to backfill a culvert pipe. However, what I used on this culvert job was crushed limestone from a mined quarry and it contained a great deal of the limestone powder mixed in with the various sizes of crushed aggregate. This powder mixed in allows the material to pack together tightly and have nearly no spacing between the individual aggregates. While not completely impervious, it does do a good job of holding back most of the water over short holding periods and more importantly it provides a nice stable pipe bed to hold up the heavy equipment that will be using this entrance. Thanks for making a good point and for watching the video! Take Care.

    • @ZeroFloat.
      @ZeroFloat. 4 роки тому

      @@digdrivediy Thank you for the answer. I am planning to do a culvert job also and thinking what would be the best material.

  • @Thecowboy1950
    @Thecowboy1950 3 роки тому +1

    Shut the loud music off or you get unsubscribed The loud music certainly takes away from the quality of your good informative videos
    Nice job

    • @digdrivediy
      @digdrivediy  3 роки тому

      Yeah, I'll admit this one was a little annoying William. This video is only about the 5th video that I made and I was still learning how so bear with me. I'm still learning of course but feel the loud music has been at a minimum. Thanks for watching!

  • @jdh395
    @jdh395 Рік тому

    comment😁

  • @JT-qf4it
    @JT-qf4it 4 роки тому +1

    Nice Video but kill that music. Would rather listen to machine run.

    • @digdrivediy
      @digdrivediy  4 роки тому

      Thanks! Yes, I agree that the music in this one was a little abrasive. I was still trying to figure out how to make the videos and while I still have a lot to learn, I try to do it a little differently now. Give one of my newer videos a chance and see if they're any better. Just remember the time lapse and drone shots don't have any sounds so I usually try to fill with something but more recently I've been using some of the machine sound underneath those shots too. I generally appreciate the honest feedback so let me know how I can improve. Thanks for watching!

    • @marktersigni1647
      @marktersigni1647 2 роки тому

      The machine sounds underneath work great. Btw

  • @kingtut5923
    @kingtut5923 2 роки тому +1

    that music makes me sick

    • @digdrivediy
      @digdrivediy  2 роки тому

      Forgive me. I was still learning at that time. I've changed. For treatment of your sickness, consider the volume button :)