How to Set Retekess TD163 Paging System Prompt Mode
Вставка
- Опубліковано 16 вер 2024
- Retekess TD163 guest paging system is ideal for fast food restaurants, food trucks, Breweries, hospitals, bars, SPA, church nurseries, and more events.
This video tells you how to set the prompt mode by yourself, it is easy. You could combine Beep, Vibration and Flash freely.
1. Beep Prompt Speed Setting (F4)
Press “Call” and “Delete” buttons at the same time to enter the setting mode,
“F1” shows on display, enter number “4” through the keypad, “F4” shows
on display.
Press “Call” button to enter sub-menu, “0” shows on display.
Enter the desired value (0 for turn off beep, 1 for slow mode, 2 for medium
speed, 3 for fast mode).
Remove the pagers from charging slots, and press “Call” button within 5s,
at the same time, the pagers flash and beep. It means to be set successfully.
Then it will return back to “F4” automatically.
2. Vibration Prompt Setting (F5)
Press “Call” and “Delete” buttons at the same time to enter the setting mode,
“F1” shows on display, enter number “5” through the keypad, “F5” shows
on display.
Press “Call” button to enter sub-menu, “0” shows on display.
Enter the desired value (0 for turn off vibration, other values for turn on
vibration mode).
Remove the pagers from charging slots, and press “Call” button within 5s,
at the same time, the pagers flash and beep. It means to be set successfully. Then it will return back to “F5” automatically.
3. Flash Prompt Speed Setting (F6)
Press “Call” and “Delete” buttons at the same time to enter the setting mode,
“F1” shows on display, enter number “6” through the keypad, “F6” shows
on display.
Press “Call” button to enter sub-menu, “0” shows on display.
Enter the desired value (0 for turn off the flash, 1 for slow mode, 2 for fast mode, 3 for breathing light mode).
Remove the pagers from charging slots, and press “Call” button within 5s,
at the same time, the pagers flash and beep. It means to be set successfully. Then it will return back to “F6” automatically.
After all the settings completed, press the “Delete” button to return to
Call state.
TD163 paging system link
bit.ly/3pOTUmK
Any questions, just feel free to contact Retekess directly
Web: www.retekess.com
Email: support@retekess.com
WhatsApp: +86 15639073051
Facebook: / retekess
Hi , I bought a two set of them with 20 each of pagers; means overall 40 pagers. But I want to use only one base to connect all 40 pagers . Is there any solution? It’s very important for me .
The TD163 base can be paired with up to 998 pagers, don’t worry, you just need to follow the instructions to pair the base with 40 pagers and they will work normally.
Hello, What shall i do if All the Buzzers just stop buzzing ?
Email: support@retekess.com
same
hello, just bought this product, and I have question, is it possible to make it beep for like 2 minutes, and them stop beeping and just stay with the flash?
Thank you for supporting Retekess. But I'm very sorry, the TD163 pager does not support setting the reminder duration of different reminder methods respectively. If you set the reminder time to 2 minutes, then the reminder time of flashing, beeping, and vibrating will be 2 minutes.
I hope this information is helpful to you.
If you need other help, please feel free to contact us
Can you Help me what to do if All the buzzers stop on sounding?
Have you tried contacting our customer service colleagues on the official website?🙂
I have it but it does not display on device the number and it doesn’t make noise sometimes
This should mean that the pager and base have lost connection. You can refer to the video below to pair the pager, that is, to set the pager ID.
ua-cam.com/video/b2N35U7rLec/v-deo.html
If you still have questions, please contact support@retekess.com
Is there anyway to silence them?
Hi, you mean just keep the vibration and flash? That is : Press the "Call" and "Delete" buttons simultaneously to enter setup mode.
The display shows "F1". Enter the number "4" through the keyboard and "F4" is displayed.
Showing.
Press the "Call" key to enter the submenu, and the display will show "0".
Enter the desired value (0 means beep off, 1 means slow mode, 2 means medium mode)
speed, 3 for fast mode).
Remove the pager from the charging slot and press the Call button within 5 seconds.
At the same time, the pager flashes and beeps. It means the setting is successful.
It will then automatically return to "F4‘’
Compré los míos, por alguna razón mientras los usaba se cambió la confirgurscion y ya no suena ni emite vibración alguien sabe que debo hacer?? Gracias
Según nuestra experiencia, le recomendamos que intente emparejar su teclado con su buscapersonas.
Porque es posible que algunos buscapersonas y teclados ya no se reconozcan entre sí cuando se utilizan incorrectamente.
Consejos antes de configurar:
1. Antes de configurarlo, es necesario colocar el buscapersonas en la base y cargarlo.
Presione los botones “Llamar” y “Borrar” al mismo tiempo para ingresar al modo de configuración, “F1” aparece en la pantalla, ingrese el número “2” a través del teclado,
“F2” aparece en la pantalla.
Presione el botón “Llamar” para ingresar al submenú, “0” aparece en la pantalla.
Ingrese el número de identificación a través del teclado (1-998).
Retire el buscapersonas de la ranura de carga y presione el botón “Llamar” dentro de los 5 segundos,
al mismo tiempo, el buscapersonas parpadea y emite un pitido. Significa que se configuró correctamente.
Luego volverá a “F2”
can you have multiple buzzers activated at the same time?
Thanks for your comment. You can call pagers with the same ID at the same time, but it does not support one-key group calling for all pagers with different IDs. If you need group calling, please check our new arrival TD166. It calls all the pagers you need at the same time by using the keyboard or computer software. Any other questions, feel free to email us at support@retekess.com😄
How do you give someone a pager and them call it if it’s not on the charger stand it doesn’t make sense ?
@@graceocallaghan3091 Hello Grace, thanks for your comment!😄Our paging system works like this: When a customer orders food, the waiter records the order number and pager ID and gives the pager to the customer. When the food is ready, press the button of the corresponding number to call the pager, and the customer will come to pick up the meal after receiving the prompt. If you have any other questions, please email us at support@retekess.com😄
What will happen if I lost one of the pagers???
Will the whole thing still work?
@@supernek0 It's okay to lose one of the pagers. Other ones will work as usual. 😃If you need extra pagers, please click here and buy some as a replacement. www.retekess.com/td163-extra-pager
how to reset the numbers?
Hello, thank you for your support of Retekess.You can click the link below to learn the method in the video to change the pager ID:ua-cam.com/video/b2N35U7rLec/v-deo.html If you have any questions, please contact support@retekess.com