Deadpool Pro - Playfield adjustments

Sorry for the long video, but I figured I would shoot a short video of my Deadpool's setup to see if it helps you solve your SDTM woes. The video ended up longer that I wanted and I didn't want to reshoot it. My DP Pro is an April 2022 build. I have the left to right axis just leaning just a tiny fraction down on the left side. If you look at the circular level it is so close to center I question if it is just dead on some days, the sprit level it too hard to get an accurate left to right reading on the slanted playfield. Additionally my PF angle is at 6.96 at the flippers. I intended to tweak it to get it to 7.0 but it played so well I figured it was good enough. I also put a thick post sleeve on the post next to the pop bumper behind Lil' Deadpool, I did this mainly because I would get an occasional ball trapped there. Most if what my set up tweaking was to alleviate the one in twenty games where I would get a ball stuck there. The tweaking of my angle, level, and the post sleeve seemed to have a positive effect on my setup in general...no more unwarranted SDTM drains and no ball traps. At the end of the video is a direct overview of the entrance guiderail to the right of Lil' DP so you can determine if your rail needs some adjusting. Sorry for the sound mix, I accidently hit the start button and just rolled with it.
Lb