Iron Man MK5 helmet in action!
Вставка
- Опубліковано 28 вер 2024
- Iron Man Mark 5 Helmet
Build it! Wear it!
STL files for 3D printing, code, instructions:
www.thingivers...
OR
thangs.com/m/3...
OR
cults3d.com/en...
Video guide for the build:
• How to build Iron Man ...
Enjoy this build!
If you really enjoyed, consider buying me a coffee:
www.buymeacoff...
Links for parts:
Arduino Nano (Every or not)
amzn.to/3E3Sk7i
PCA9685
amzn.to/3jsHYG8
3x4 Right Angle Male Header
amzn.to/3Ba7CFE
Wing Servo (corona ds-239mg)
hobbyking.com/...
sg90 Servo
amzn.to/3vFvX55
Capacitor (2200 uF)
amzn.to/2Zr0Q11
led eyes (flexible)
amzn.to/3Gcnr2r
power bank
www.adafruit.c...
limit switch
amzn.to/3Ca0337
power switch
amzn.to/3m3YXjJ
usb cable LEFT and RIGHT angle (for in-helmet power)
amzn.to/3GeTRJK
m2 bolt set
amzn.to/3C7NgOK
m3 bolt set (countersunk)
amzn.to/3nhn8L7
M3x6mmx0.5mm Flat Washers
amzn.to/3CazOcM
Optional:
jst connector kit
amzn.to/3EarWsG
3D printer:
amzn.to/303GYSe
Do you have to cut those white arms that came with servos to fit the printed servoArms?
thanks a lot for sharing your work, you did a really good job!
Enjoy
I just ordered all the components, This is going to be a great winter project. Thanks for sharing
Sure thing
Same here!
same here man! been trying to get my kid into mechanical electronics for robotics and this might work.
So Fcking amazing. I will for sure try to build this. Coolest thing I have ever seen Thank you so so so so so much!
Enjoy
Like your buy me a coffee thing
I love this. I'll never make it, but it's awesome.
Thanks a lot!
Enjoy
NICE THANK YOU HOW DID YOU PRINT brow_center_mount IN THE AIR WITH SUPPORTS WHAT
Very cool. Do you think this could be slightly enlarged and made into a case for a mini itx computer?
I'm getting the following error when I try to upload the sketch to the nano. Do you have any suggestions?
This is incredible. Is this made with PLA or would it be better with PETG for strength?
nice :)
Hey... Awesome job... The powerbank u suggested is from adafruit. Unfortunately, I cannot get it shipped to Qatar due to rules. Is there any other alternative with similar dimensions? Or it wud be great if the dimensions in the model for powerbank placement cud be adjustable or universal kind..
I think it's a standard size power bank. Check dimensions on adafruit and find an alternative
Is it wearable 😅
which me luck!
Best of luck
Hey I am working on this project off and on now and was wondering, do you have a contact to ask you any questions about the build? I’m having some trouble with the servo wiring. Thanks!
Did you get a reply to this? My son is having some issues with the wiring also.
What are the measurements once all put together? (this includes all inside measurements with all electronics)
I'm just speechless... 😲. Amazing work!
Can you make a updated one to match the newest models? Like the chin moving and the back opening?
I didn't see it directly but is the arduino files for programming included?
Yes, in the extra zip file
Can you make one for me? I’m lazy. 😂 Very cool
I bet I'm lazier
hey man can you make a new version of your mk5 helmet that can be adjusted in size
The smell like new car
insane
can I wear this? I know some helmets can only be worn with connecting pieces
Yes, wear it by itself
This is so cool! Great job! Thanks for sharing you work. Can you wear it?
Absolutely
i cant find the files for the test fit cage on any of the websites
It's inside the extra zip file
we can wear this one right?
Yes you can
Such an awesome build. Thank you for sharing. I am in the process of loading the sketch onto an Arduino nano , upon verifying the sketch, it gives me an error. line 2 adafruit line. an error message states there's no such file or directory. i apologize in advance, i do not know anything about this. please help thank you
How much do all of the parts cost together?
About $110
You are the best!!!!
I love you !!!
Very kind of you
When you put this helment on can you look through or this led-s are too bright ?
i thank you so much for this !! ive always wanted one like this !
Do the servos make noise after its fully opened?
Hi! I sent you a message on Instagram as you provided to ask you a question about the compatibility with other components but I didn't get an answer so I try there. Are there other wing servos I can use for it? Or are they the only ones which are compatible with this design? By the way, the 3d model is just gorgeous and incredible! I'm glad such makers still share they works today, and I hope some day I'll be able to make such designs.
Congratulations! And thanks for sharing!
ciao lavoro stupendo vorrei realizzarlo potresti condividere il softuare per arduino grazie ..... sei stato bravissimo i miei complimenti
it would be nice to have a remote switch, something that can be interfaced with alexa too maybe :)
That would be cool
It's build using an Arduino. It should be fairly simple to use an ESP32 microcontroller instead. Those come equipped with Wi-Fi and Bluetooth, plus they are compatible with the Arduino IDE. Some insertions in the code and IFTTT event triggers should make it controllable with a smartphone interface and Alexa. The biggest challenge would be fitting the larger board into the helmet, but there are smaller versions of the ESP32 available that might fit with very little modification.
@@dedsecaffiliate1979 Great tip. I don't think there is enough room in this helmet but I may try to integrate it into a MK80 I built
@@cody2662 Nice. I hope it works out well for you!
🤩🤩it's Amazing
Thank you
super cool~
Salve c'è un modo per farlo aprire un po' di più che va più sopra?
how long does it take to print all of these parts?
About 48 hours
Awesome design. I am building mine just now. Are you on twitter so I can tag you in my tweets?
Not yet on Twitter, maybe soon
@@BoxandLoop instagram ?