Hey I appreciate that so much ive had so much trouble finding videos for my car and when i started learningabout how to fix it... i made it a thing to actually make videos to help people and make the videos as well 🤞🏼 im stoked to help and happy to as well!! Since i didnt have that much help online also but yeah bud!! Happy wrenching and stay safe!!! 💪 lets go KIA owners 😂
Thanks so much, this was very helpful. One comment to add. I used a long handle offset 10mm box end to loosen/tighten that crazy nut inside the panel. Still tough to access, but the wrench helped.
Hey I appreciate you watching and leaving feedback!!! Happy wrenching also if you have more sporty help out for projects check this playlist KIA "HOW TO'S" DIY REPAIR ua-cam.com/play/PLEpqIU9EB4PY3FY6be0XZPlHXYUZSN-yR.html
I have a 2008 Kia Sportage & on the driver side the handle broke off & can’t find a video on how to fix it. your video’s only show the passenger or the rear door’s but what about the driver side. can you make a video on the outside of the driver side please, thank you
@@rosieflores4578 hey rosie!!! Its about the same on the driver side! Might just have a extra connector for the window circuit board but its the same! Kind of process just opposite!! Good luck and happy 🔧wrenching
Thank you very much for your video, really helpful! One question, is it possible to remove the interior door ornaments ( the ones you have stickers on ) ? The ones I own are grey, and would like to replace them with a black variant, just as you have, but don't know if those are removable, and if so, how difficult it is to remove them.
Ahh ive hear for easier access some people took out the whole latch actuator and latches and they even drilled a hole in there door but i dont recommended the hole part!! But yeah good luck and try thinking of many other ways to get the job done!!!
Just curious but do I need to replace the exterior handle when replacing the interior or is this just a guide to do both. Great vid and really helpful.
@@MarkPuke13 Hey if just the actual lock button on the handle is stuck do you think I would need to replace the whole handle or is it something I can fix with basic tools?
I replaced my door handle (outside) but it knocked the nut loose that holds the cover in place 😢 does anyone know what I can use as a replacement ? It’s the one you take off with the ten mm ratchet
hi sir salamat sa video na etong ginawa mo!, tanong ko lang poh sir yong case sakin na bali po yong dulo, at naiwan yong part non.kailangan ko po bah totaly baklasin ang cover ng door panel? thanks po! more power ! jay.
sorry for late reply pare!! yeah kailangan mg remove kase bolt ang door handle and when you remove the handle..the dulo part will need to come out! sorry bro taglish ako!
No lie, I’ve learned from you a lot. Your car is so similar to the 2005 Kia Ex I’ve been working on. Thank you bro.
Hey I appreciate that so much ive had so much trouble finding videos for my car and when i started learningabout how to fix it... i made it a thing to actually make videos to help people and make the videos as well
🤞🏼 im stoked to help and happy to as well!!
Since i didnt have that much help online also but yeah bud!! Happy wrenching and stay safe!!! 💪 lets go KIA owners 😂
Thanks so much, this was very helpful. One comment to add. I used a long handle offset 10mm box end to loosen/tighten that crazy nut inside the panel. Still tough to access, but the wrench helped.
Cheers and thanks for watching happy to help
Thank You So Much Your Video Was A Big Help 😊 I Really Appreciate You Taken The Time Out To Post This Video
Hey thankd for watching I appreciate you too and hapoy wrenching stay safe!
help me alot cables for inside were alittle difficult but got it..thanks for video
Glad it helped
Thank you very much for this video. Driver side interior door handle decided to crack and crumble on me.
Hey happy to help and happy wrenching
Super helpful, thanks brother.
Hey I appreciate you watching and leaving feedback!!!
Happy wrenching also if you have more sporty help out for projects check this playlist
KIA "HOW TO'S" DIY REPAIR
ua-cam.com/play/PLEpqIU9EB4PY3FY6be0XZPlHXYUZSN-yR.html
Thanks for the video! I needed this, BR // Rookie
Youre welcome!!! Happy wrenching
Great video, easy ando clear, tnks
Youre welcome subscribe!! More future kia car video dropping soon
Can you please show the driver side door handle from outside step by step? Thanks
Hey 👋 thanks for watching its about the same process you can use in the drivers side.
very helpful dude thanks so much
Youre welcome!! Pass the knowledge on to fellow kia owners if ya get the chance!!! Enjoy life and happy wrenching
Is the driver side handle a bit more complicated considering that I have keyless handle?
Might be similar try looking up forums online might help but i know its sinilar just vice versa cause sides happy wrenching
I have a 2008 Kia Sportage & on the driver side the handle broke off & can’t find a video on how to fix it. your video’s only show the passenger or the rear door’s but what about the driver side. can you make a video on the outside of the driver side please, thank you
@@rosieflores4578 hey rosie!!! Its about the same on the driver side! Might just have a extra connector for the window circuit board but its the same! Kind of process just opposite!! Good luck and happy 🔧wrenching
@@MarkPuke13Ok thank you so much. Keep posting your videos of 2008 Kia Sportage’s please I’ve learned a lot from them. Take care & again, thank you
Thanks for the support and watching!! Good luck
Thank you very much for your video, really helpful! One question, is it possible to remove the interior door ornaments ( the ones you have stickers on ) ? The ones I own are grey, and would like to replace them with a black variant, just as you have, but don't know if those are removable, and if so, how difficult it is to remove them.
Oh yeah the panel?? Its just hard to find them.. it should be a clip holding it thanks for watching
@@MarkPuke13 good to know, thank you!
hi again gotthe front right but couldnt get key lock out hung up on rod was afraid to pull to hard.and the 10mm bolt stripped…waiting for rear..
Ahh ive hear for easier access some people took out the whole latch actuator and latches and they even drilled a hole in there door but i dont recommended the hole part!! But yeah good luck and try thinking of many other ways to get the job done!!!
Great, thanks!
Happy to help!! Stay safe happy wrenching
Do you know if these exterior door handles are reversible? All I'm seeing near me are listed as front right handles
Not sure i dont think so the shape thats why
Just curious but do I need to replace the exterior handle when replacing the interior or is this just a guide to do both. Great vid and really helpful.
Just a video for both!! Change what you need my dude!!!
Dont fix things that aint broken!? Or whatever that saying goes 😂 happy wrenching
@@MarkPuke13 Hey if just the actual lock button on the handle is stuck do you think I would need to replace the whole handle or is it something I can fix with basic tools?
@@treacygutierrez2136 might mean the latch is broken on the lock ive had that before and inhad to replace the lock actuator
I feel like you can replace the exterior without replacing the inte6and having to remove the stuff inside the door panel. Is this true?
Well you can try ive never did
this is how i did it.. good luck 🍀 👍
Thanks mate!
enjoy
if my outisde door handle has a lock mechanism does it change much?
Are you talking about front? Handle if so yes. It has a small difference but I believe you can figure it out not that hard
D.O.P.E👍👍
Thanks
I replaced my door handle (outside) but it knocked the nut loose that holds the cover in place 😢 does anyone know what I can use as a replacement ? It’s the one you take off with the ten mm ratchet
Not sure 🤔 try reddit
what about the drivers side
ua-cam.com/play/PLEpqIU9EB4PY3FY6be0XZPlHXYUZSN-yR.html
Its pretty similar just like the rear
your vlogs are great except forvthe knife use..
Thanks for watch 🔪 ing
hi sir salamat sa video na etong ginawa mo!, tanong ko lang poh sir yong case sakin na bali po yong dulo, at naiwan yong part non.kailangan ko po bah totaly baklasin ang cover ng door panel? thanks po! more power ! jay.
sorry for late reply pare!!
yeah kailangan mg remove kase bolt ang door handle and when you remove the handle..the dulo part will need to come out! sorry bro taglish ako!
also which side?! front side?
mas ma hirap kung sa likot at different...
case kalangan mo remove yung door actuator kung sa likod!!
at yung panel!
sa 6:55 yung bolt yan sa cap dulo for the handle.
pero...yung handle nga may bolt sa loob pa..
ua-cam.com/video/4lpCRbGCJZw/v-deo.html