Hi "Foodie"....Well Thanks for appreciating my work... All the best in life And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401 Small contributions can make a Big Difference
You've just saved me. My exam is literally two hours from now and I had a problem with machine blocks and this has cleared any doubts i would have had.
Thanks for appreciating my work.... All the best in life And do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....
Thank you, sir. Your tutorials helped me to achieve good marks in the exam. When I started watching your videos, I had no idea about this subject. But your videos helped me understand the subjects.
Please is the y-axis a particular distance away from the front and top views? Or was it a vertical line drawn at any distance? I thought there'd be a measurement for that.
Thanks for appreciating my work. Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html 2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html 3. Projection of Line: OLD: ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html NEW: ua-cam.com/video/pzE0D-Ijxd4/v-deo.html 4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html 5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html 6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html 7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html 8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html 9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html 10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html 11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html 12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html 13. Involute: ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html 14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html 15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html 2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html 3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html 4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html 5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html 6. Scales Hindi-Urdu: ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html 2. Friction: ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html 3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html 4. Trusses: ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html 5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html 6. Moment of Inertia: ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html 7. Dynamics: ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Sir i have a doubt regarding the top view of this problem is int suppose. To be 30x 40. In dimensions and the extruded part should be in bottom in top view ???
Sir, in this video you have taken right hand side view in 1 angle projection But in 1 angle projection we take left hand side view Sir please help me with this problem
Right hand side view will have to be drawn as we have no data about the left hand side view considering the Observer Arrow position too. That's how we simplify this issue. :)
Sir,please make a video on the horizontal and vertical projections of straight lines are given visualize the lines determine the true lengths,alpha,beta and gamma by revolution method,A(0,20,15)B(50,40,10)
I’m having by sem exam in 4 hrs and I had no clue about orthographic projections until now. Thank you. You are a life saver
my test is tomorrow. this is of great help thanks!
Hi "Foodie"....Well Thanks for appreciating my work...
All the best in life
And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401
Small contributions can make a Big Difference
I have a test tomorrow and i understand very slow huhuhuhu i'm worried
Last minute engineers
sir at the starting point you said 'this is your friend'. I like it sir
very well explained 。。。very well taught。。。thank you for parting your knowledge FOC。。。 keep it up !!!
Best UA-cam channel in engineering graphics.. thanks a lot sir..
I cleared my ED backlog because of this channel 😁😁... thank you sir
Bro still I didn't start seeing this videos..
Can you tell me
By watching this we can cleared our backlog ED??
Plzz I want your opinion..
@@-FHareesh watch his video bro he explains in simple method u will understand easily
@@-FHareesh not only this watch involute, ellipse, parabola, hyperbola,
@@richiejoseph0906 Okay Bro
I will watch
Thankq For Ur reply...
Sir you are doing a great job I am watching almost every video now i am confident to attend my exam becoz of you👏♥️♥️
a lot thank you,,these are the kind of drawings i have been looking for
I always follow this channel and i collected lot of knowledge free.thank u lot sr !
You've just saved me.
My exam is literally two hours from now and I had a problem with machine blocks and this has cleared any doubts i would have had.
Sir, you are a legend.
Salute from BITS Pilani
+1 😂
very helpful.... to the students... thank you..
Thanks for appreciating my work....
All the best in life
And do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
Manas Patnaik which screen recorder do you use?
iTS tECHSMITH
Manas Patnaik thanks
I have passed exam in this subject only because of these tutorials...😊😇
Simply amazing the work you do..
Helpful is nothing but an understatement to what you do with your presentations..
True fan..
Usefull bro
Happy. Teachers day sir,only bcaz of u i have clear my 1st year ,ty very much
My best wishes are always with you Ayush take care
Sir now my result came ........because of u iam passing my Engineering drawing ......tnqqqq soooooo much sir love u ...................
Sir right side view ko left side kyu banaya ?
Fantastic
Fantastic.. love your content..fell in love with a new hobby
Great help..Done with the topic ..Thank you@Manas_Pathnaik
We r blessed to have u sir...
Thanks sir very helpful 😇🙏
Really outstanding explanation sir Hats off 2 u sirr!!💞👌👏👍
Thanks Paone for appreciating my work.
All the best
Manas Patnaik tqq sir
nice explanation....easy to understand..
ur videos are helpful......since gud xplaination
Right
It's nice teaching sir please can upload few more different problems on orthographic projections
Super bro it is a great information for us👍👍
Sir ... Your videos is very helpful for me .. during this lockdown.. thank you so much sir..
Sir,I really love your videos.They are a lot of help.
Sir the profile plane should be on the right side of the v.p as it's first angle projection or is this something different
Yes please someone tell
Thank you, sir. Your tutorials helped me to achieve good marks in the exam. When I started watching your videos, I had no idea about this subject. But your videos helped me understand the subjects.
It's also my first time, please help me
Thank you sir, I got a B+ instead of an F only because I learned from your videos.
Nice explain.... tq so much
Thank u sir for making wonderful videos about diploma drawing and also prepare an app for diploma students on bases of diploma subjects
Thanks Sir with the help of your videos i finally able to pass in Engineering. Drawing.
Hi Anshul.....
Great to know that my videos helped you learn.....
Keep watching and do share this with your friends also...
All the best......
It is very useful to the students. thanks sir .
Thanks sir
A lot studied 💞
Very very very nice explanation
Today I learnt the actual engineering graphics after a tremendous loss in first year
Engineering Drawing | Engineering Graphics |: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Engineering Drawing HINDI: ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
sir it is very useful .thank you sir
Sir, it would be really nice if you could please develop content on sectional orthographic projections too. Keep up the good work!
Sure
Please is the y-axis a particular distance away from the front and top views? Or was it a vertical line drawn at any distance?
I thought there'd be a measurement for that.
Good one sir!
Tqsmch u continue like this there would be no backlogs for us tqsmch manas😘😘
Thanks Tejaswi....
Today I attempted all questions just because of listening to ur class tqsmchhh 😘😘
you are osom sir,excellnt wat a video buddy.
Sir will you please make videos on Perspective projection?? I am getting too much confused on this....so please
in 3rd Angle projection how sheet is distributed for both right and left side views?
These are helping us very much
Thank you for making these
Engineering Drawing | Engineering Graphics |: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Great work..🤗🤗🤗
Nice presentation...
Thank you so much, you explained very well.🙇
Thanks a lot 😊
Do share it with your friends also.
Nice video
And nice video
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
I didn't understand how it is a first angles projection. It looks like third angle
You know your are best
Sir, shouldn't the projectio of profile planebe on the right side of the projection of front view. Pls answer this sir
Can the principle plane be made on the right side of verticle plane intead of making it on left side of VP in 3rd angle projection ? Plzz tell
Very very helpful
Tq for making videos this are very helpful to all the engineering students
Sir can we take scale in orthographic projection if the dimensions are too large as per the size of the drawing sheet?
*Nice video*
👍
Great sir
very good and helpful sir
you are great sir
Thank u sir helped me a lot for my exam
useful video bro
Sir what software you use for engineering drawing
Where can we get the figures of the objects that you have taken
Bhagwan kha ho aap , apke Charan sparsh krne hai apki vajah se ed me pass ho gya
#adidevmanas
sir please upload *nomography* *and* *perspective* *projection*
all your tutorial video is very helpful. Thank you. May you be blessed with great health & wealth.
Thanks for your kind words.....
You deserve the kind words as kind as your contribution to the community
Sir why you drawn side view on left side, i mean in some videos it is on right side ? Is it ok to draw anywhere ?
I understood
What is better?
T-Scale or Mini Drafter?
i have to construct a the pieces together...taking the isometic pieces apart is not as hard as putting them together...can you do that
This is the flipped from my😲 my has FV on second quadrant, TV on third quadrant & side view on First quadrant....am I wrong?
Nice videos on drafting
I agree nice videos on drafting
Awesome video on AutoCAD 3D. I have some fine AutoCAD tutorial videos on my channel that may be helpful too
Can you pls explain more problems on orthographic projections sir
Thanks អរគុណបង👏
Excellent sir
Thanks for appreciating my work.
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html
3. Projection of Line:
OLD:
ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
ua-cam.com/video/pzE0D-Ijxd4/v-deo.html
4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Sir i have a doubt regarding the top view of this problem is int suppose. To be 30x 40. In dimensions and the extruded part should be in bottom in top view ???
Sir, in this video you have taken right hand side view in 1 angle projection
But in 1 angle projection we take left hand side view
Sir please help me with this problem
yes i am in confusion too
Right hand side view will have to be drawn as we have no data about the left hand side view considering the Observer Arrow position too. That's how we simplify this issue. :)
Kapil Goyal Jo first video hai use Dekho clear ho Jayega
How to direct if you draw this image from a third angle
thanks..
Help us try more projections with drills and other hidden features
Please explain the very basics to draw orthographic projection in paper sir it's my humble request sir
Hopefully he will. What he's done here is good and very clearly explained, but I'm just not understanding it.
If u add videos related to perspective projection using visual ray and vanishing point method it will so so helpful
very helpful
Great video Thanks
Sir, I need your videos of machine drawing of mechanical engineering.if available means plz mention the link below
Terimakasih banyak tuan
All the best
Can anyone please tell me ehich angle of projection is this? As its different from 1st angle as well as 3rd angle.
Your veideos very helpfull for me
Sir,please make a video on the horizontal and vertical projections of straight lines are given visualize the lines determine the true lengths,alpha,beta and gamma by revolution method,A(0,20,15)B(50,40,10)
nice explaination, thanks
Engineering Drawing | Engineering Graphics |: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
sir how to darken the line in autocad 2016 I am not getting
2:57 you have said that horizontal line appears to be attached with slope line sir can u explain this how?
bro when you will see from front you will just see a line which is touching that inclined plane so it is that way
Thank you sir I was passed to saw your videos
All the best.
1. Engineering Drawing (English) :
ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
ua-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
My AMAZON Store - For all you students.
www.amazon.in/shop/manaspatnaik
How to this picture first angle to third angle
Thanks Manas. I have e-mailed you about few queries with example. Was wondering you got it?
nice sir thank you....
sirtheoryexplaned