Mercedes ML front wipers not working. The disassembly and assembly repair...
Вставка
- Опубліковано 29 сер 2024
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This Mercedes ML came to me with a non working front wipers...
Not a very interesting video, as I have not really done anything that can be called a fix...
Nevertheless, I decide to share this with you, it might be that there is some useful information on this video that can help someone with a problem on the wiper system...
Hope you enjoy the video.
Any questions or comments, please put them below.
Like always, thank you for watching!
People try to clear the snow and frost with wipers normally leads to peak current spikes on the fuses. Also binding wiper posts are worse with the cold weather. Big Thumbs up..
Mike James
Indeed... I had no background info about the problem...
Thank you for watching!
As what happened to me on E200 2000 today .. no wipers, no Turn signals and even no horn.. omg all together .. i said i have a problem with the SAM.
But guess what a fuse running all of them and it was not even blown.. its plastic is melted and not sitting very well .. nice to share experiences with you sir.
Thanks for all of your efforts.
Nice you got it sorted!
Thanks for the feedback!
👍👍👍
@@LMAutoRepairs you are welcome and nothing to worry about😀😀
Hamad Yousef was this on rear board?
I think,it is always better to start by checking the relay fuses before disassembling.
👍
Fixed my problem lol. Was trying to use them with the bonnet open
😊🤣
Yes... that will definitely work...
👍👍👍
yes but didn't he just show it in use w/o it? My wipers just stopped working last night. All I did was remove them and the bonnet to clean the drains. I checked the fuses, their good
Great video
Thumbs up for the detailed diagnosis.
Thanks!
For watching and for your comment!
Very nice video man it remind us how important the basic test is and dont always relay on diagnostic tools that why i always carry an old wire with a lamp hhhhhh.
hicham bouchou
True... I jumped a bit on this one...
Thank you for watching!
Awesome
Thanks!
👍👍👍
hello, nice video, i also thaught something with the motor,or arms that are rusty blocked, because of the overload chowing with your autel, but at the end only a fuse;-), some one has taking it out
Global Car Parts
Yes, just don't understand why... go figure...
Thank you for watching!
Thankyou for the video Imsvvavr. Every time we learn something from you videos.
Aldi Shuli
Thank you for watching!
Thank you my teacher, good job, your videos is always very helpful,, but how much amp draw it wiper motor generally, waiting for the next video
abderrahim amroune
Well, that's a good question!
The fuse for the wipers was a 30 amp one... so if I would see anything close to that, would mean something was not right...
Hope that makes sense...
Thank you for watching!
Thank you my teacher
My windseld is not work but I m thing tries to reset the botton on .is the last time but thank you somuch
No problem always a pleasure to watch your videos waiting for the next one.
hicham bouchou
👍
Exselecte diagnostic amigo nice video
Mechanic Technician Repair
Thank you for watching and for your comment!
hi good video like always i would like to say that i always check fuses and rellays and their positions before any intervention on a car i learn it the hard way you never know what was done to the car before it comes to you but the way you trated the issue was as it should be done by pro
sadik mamoun
Hi
That's absolutely right...
Was the overload that leads me in that direction...
Thank you for watching!
Hello please how can I fix my fuel gauge it shows full even when the tank is low
Start by checking wiring integrity...
Test the lever sender...
👍👍👍
There was no fuse in mine to ( this fixed the problem) . I am wondering what a coincidency to miss the same fuse in my case to. Maby the motor drain the battery and is purposly removed?
Possibly...🤷♂️
👍👍👍
And if the problem resides in one of the wiper shifts...? I find some of them corroded and with difficult of movement.
It's possible that fuse breaks to the customer, he pulled it out for change it, and then, he forgot to tell it to the first garage.
Possibly...
👍👍👍
Luís hello! Just an apart question. Was that a ML 63 AMG? It doesn't seems like one from the inside, the speedometer only goes to 160 mph, the engine covers says Mercedes and not AMG...
Hi
This was some time ago... I don't remember all the details...
Sorry...
Mines stuck up now, never had this on any mercedes i have had, was struggling before then just stuck, what lube to use? Ill check same fuse
Use wd40 to start with...
Then some grease based lubrication...
Thank you for watching!
Mercedes being Mercedes. I'm currently having the exact same situation
I m remover fuse is stars is working again . Thank again
Good job my friend as always. How do you like your amp clamp you used in this video. Thank you cheers
Hi Ramon!
Indeed a nice little clamp, and more than enough for this sort of work...
One thing I don't like is as it is an AC and DC clamp, when you turn it on it defaults on AC... well I don't like that because I need it on DC, I suppose that will be good for who will be using it for AC... lol
Other than that, is good!
lmsvvavr thank you my friend. I will put that clamp on my Christmas list. Cheers
KY Home Garage KY Home Garage
You might get it...
Have you been a good boy?
🎅
lmsvvavr From my prospective I was very good boy but if Santa asks my wife I am not sure.😁😁
KY Home Garage KY Home Garage
😆🎅
What size fuse was added
Blue... 15 amp
👍👍👍
Where is the relay found?
The service manual says use a 2x4 that looks like a 1x4.probably the problem
My wipers, horn, fuel gage, and front cigar lighter are not working on 2009 ml350. Can you help?
They are possible separate issues...
But might not...
Test the gauges with a scan tool... if all good, check your rear sam... rear sam is the module that take the readings from the fuel tank level sensors, and send the level to the cluster...
The wipers and horn are front sam... check fuses etc...
Scan the car and check live data...👍
Thank you for watching!
Yeah. Get a new car
Hi. Thx for video. Tell me what multimeter do you use?
Hi
Thank you for watching!
I use a UNI-T... I can't remember the exact model... I can have a look if you want to know...
The first thing you do is check the fuse!
speedway98
And I did... I did checked all the fuses in there... just did not realized that the one for the wipers was actually missing....
Thank you for watching!
No, you do other things so you can charge the customer more hahahah
Zero Gar
Well, this car did not even came straight from the owner... came from another garage... which probably have charged the customer for the time they have wasted not even finding the issue....
Thank you for watching!
My fuse was ok the trouble was in the finger contacts! Clean out old dielectric and clean contacts! Tks for the video!
@@speedway98
Thank you for watching!
people should tell the mechanic, if they have been to another mechanic for the same problem before.
Absolutely agree!
Would save loads of time sometimes...
Thank you for watching and for your comment!
Should be a a diode ,.......diet is what you go on ?
As well...
😋
Hahah was funny these one
Tell me about it.... lol
Thank you for watching!
the quality of the fuse u put is bad ... just saying
Tallih Youness
?
im talking about the 15amp blue fuse u put in ... see they look so cheaply made, the test points are almost always covered in plastic and the terminals are actually thinner than a genuine fuse with white numbers written on the top ... great videos i actually learned from you
Tallih Youness
Hi
Thank you for watching!
You don't know what you doing man
No I don't... but fixed the problem...
Go figure...🤷♂️