Flysky FS i6 Transmitter and FS iA6B Receiver Binding and how to calibrate the ECS's
Вставка
- Опубліковано 5 сер 2020
- This video is about how you can bind fsia6b receiver to fsi6 transmitter. This video also contains information about how to calibrate esc.
--------------------------------------------------------------
🔴Get single piece from Amazon👉
🔥1000kv brushless motor: www.amazon.in/Techleads-Brush...
🔥30 A ESC: www.amazon.in/Robotbanao-Robo...
🔥FS-i6 Transmitter: www.amazon.in/Flysky-Transmit...
🔥2200mAh 3s Li-Po: www.amazon.in/Robocraze-Batte...
---------------------------//------------------------------
🔴 Connect with me on
/ ashish.dahekar
groups/12880...
---------------------------//------------------------------
Ashish Dahekar youtube channel provide you with genuine and unique electronics and latest technology product review which you will get very rare at one channel on youtube. Please subscribe, we work hard to add Technology values in your life.
All visuals and audios used in our channels are subject to youtube community copyright guidelines.
[You’ll never get these video other than Ashish Dahekar channel]
🔥Click TO Watch Best Timers Review in Market - • Digital Timer switch |...
🔥Click TO Watch All best Night Lights in market Reviews -
• Touch Light | Night li...
---------------------------//------------------------------
All the visuals and music subjected to UA-cam copyright policies. We have paid stock footage subscription .
#ashishdahekar
#calbrateesc
#receiverbinding - Наука та технологія
Bhai bahot bahot bahot bahot sukriya. 🙏🙏🙏🙏🙏🙏🙏🙏🙏
5 days se pareshan tha. esc proper calibartion nahi ho rahi thi. but ap k es video k waha se mera kam 2 min may ho gaya. throtal up n down kisi k video may nahi bataya gaya hai. aap k waha se mera kaam ho gaya .thanks alottt❤
thank you bhai bahut madad milee is video se, keep it up
Nice product 👍
hello sir, I have the same fly sky fsi6 Transmitter. After linking with the battery the receiver cant works, neither the receiver l.e.d. blinking nor the other mothers are working. From your point of view, what will the reason be? should I have to purchase another receiver?
आपका वीडियो। बहुत बहुत अच्छा लगा।
Thank you.. keep watching aur subscribe karna bro
Thank you so much bro!
Welcome bro
Thanks for your information 🤩🤩👍🙏
Welcome
Thank you so much bhai
Nice bro jabrdast❤
Super nice explanation
Thank you so much 🙂
thanks bro it's really work 🎉🎉🎉😊😊😊❤❤❤
Welcome. DO subscribe to support
Thanks bro
thank thank you you are the best
You're welcome!
Tnq Bhai
I am very new to RC.. My receiver is binding but not calibrating.. I have FSTH9 TX and 10 ch receiver.. What is wrong
Will this also work for radio link t8fb
Wow nice video
Thanks
Thanks
Can I arm FPV using flysky i4x 4 channel transmitter
Very useful
Thanks a lot
Thank you
Welcome!
Good
Bhai iske reciver me 11.1 volt ki lipo battery lga skte hai ya nahi aur is remote me kya Duracell 1.5AA lga skte hai
I am not having binding key where can I get new one or can I do binding without key
I want to make a drone then do I need 4 esc and 4 battery
👌👌
Bec 5v channel 3 chodke dusre me nahi de sakte kya ?
i want to make toy car 4 X 4 wheel so how many part are need PLZ tell me and it toy car also fast
Use Johnson 600 rpm motor, tyres , flysky, lipo, motor driver
Hello ! Great vid. I conect oposite voltage baterry to my fs ia6 receiver AND saw smoke... any ideas for the repair
buy new one and never repeat this mistake again or it will cost u a lot in future. Check the polarities b4 connection.
@@AutomationDude I know ! thanks
Hello Ashish ji,
I have all equipments exactly same as in your video. I am also following the binding procedure as explained by you but still binding is not taking place. The LED is not becoming solid. What may be the reason? please explain.
contact manufacture or seller.
I dont even speak the language you speak in your video and yet I understood everything. You explain things very well and above all, you show them very well. You earned a sub right there bro
Appreciate your feedback bro. Thank you
The transmitter which is used in the vedio... Will it get connected with any reciver or the particular reciver which you showed in the vedio?
No bro. This transmitter can connect to any receiver from 2 channels to 6 channels reciever
I purchased new flysky FS16X its all factory setting and didn't change it. I did follow.
Transmitter bind up with reciever and response ok. Servo motors moving and when connecting motor's then esc esc getting smoke. I did samething as you did in vedio but when motors connected then ESC burned 🔥. Without connecting motor not burning but no action in esc calibration. Can you advise on it
Thanks
Yousuf Butt
Maybe you used wrong specifications of electronics.. watch the videos in rc plane playlist to learn about the right combinations of electtonics
Bro please help me, I want make a rc water boat and I have 4 channel dumbo rc x4 transmitter and receiver so may I use channel 3 for
One motor for moving the boat in the right direction and channel 1 for other motor to move the boat in left direction.??
I made RC boat using flysky fsi6 tx and rx. Dont have idea about dumbo. But if it is 4 channel then yes its possible to do twin motors.
My receiver is not blinking 😢 is the problem in ESC?
Is reciver me dc motor jo ki do wire ke saath ati hai usko kaise lga sakte hai
What are the two permanently attached wires on the receiver for?
those are antennas
Battry kitnay vadd ki hay?
We can contor normal dc motor with this esc that is brushless esc
No
Bya beratri kitne teyr Tc rhati he
Hello this is jenukal I am using DJI Naza m v2 kit in dji Naza assistant remote control throttle not calibrating with assistant how to do that
You must read the dji manual for that
Chenal 1 me sarbo motor lagane par apneaap chal rhi h or bldc motor be nahi chal rhi h jabke sarbi testar se chal rhi h to iske liye kya kare plz help me
Bhai esc or lipo connect krnse kyun spark hua
ESC Calibration sabhi model ke drone me karna padta hai..?
yes
Is it fine that 930kv is for 2200 battery?
mah doesnt matters.... what matters is whether battery is capable of providing that much current which the battery requires or not... watch this video: ua-cam.com/video/Euid5rvkT8A/v-deo.html
Bro please upload hole video of drone make and connect to transmitter please bro upload kar dena
Bhai I have one question.
I am making a single propeller with two servo motors, RC plane. The recommended battery is 1000 to 1300 mAH battery but I want to buy and use 2200 mAH battery. Now my question is, will it make any differece apart from giving extra endurance? What about the mass balancing? Will the two batteries have same mass?
Please suggest.
thanks
Your planes total weight Will increase... you meed to balance on proper CG.. IF THE THRUST of the plane is more than the total weight and CG is proper then you can use 2200mah
I decided to do something different myself... I used 4 2000mAH 18650 batteries and its working pretty well overall, the performance is good
Good night sir I'm shan from khurja zila bulandshahr sir ji jo apke pas transmitter h sam mere ps bhi h but mujhe connect nahi ho raha h plz help me sir
Bro I have a fly sky ct6b my transimitter always show low power it means red indication in new batterys so the signals not received so can you help me to solve this problem
cannot help in that case brother... may be you should contact the seller of it.. with new batteries it should not do like such.. may be its faulty.
👍👍👍👍
Fly sky rang kitna he
Isse drone kese banaye aur channel connection kese hoga.
Motor only 1 bar hi ring ho rahi hai pls solution batao bhai
Bhai kam price ki esc le toh kya hoga jaldi kharab hoti hai kya
depends ki tumhari motor and battery current rating kitni hai. esc torture karoge toh jaldi kharab hogi. Maine local esc li thi ek saal pehele. 100 se jyada flights kiye hai still its in good working condiotion
Bhai meri 1000 kv motor hai aur 3s lipo battery hai
How can i backward car thotharl is alway farword please reply......
Use channel 2 for that..
Bro Is se 2 motor drone bnao please
How to recharge the lithium polymer battery?
ua-cam.com/video/nC5Fq11LMxI/v-deo.html please subscribe channel
Bro my ESC is not calibrating my motor 1800kv 30a ESC and 2200mah battery fsi6 transmitter please help
if you follow the steeps then esc must calibrate. This is simple step first power ON the tx and put the the throttle stick to 100%. Then power the receiver and the motor should beep 2 or 3 times. Then turn the throttle stick back to 0 and motor beeps 2 or 3 times and its done.
Calibration is done but my motor is not spinning it spin left and right and then stop and did not spin
My lipp battery is doing zero.wanted a lipo battery 8c 2s 4.7 v 1000 mah . please provide me link ,store in our country. Rc bazar don't have the battery. this is for my transmitter rc os 10 ch
download robu app.. you will find it there
Kya nyi esc kharidlu
yes
Bhai mera kk 2.1.5 showing error no yaw input
reset the transmitter
Hallo sar transmittar ka praij
After calibration it works in half throttle
calibrate again with proper steps as shown in the video. still having the same issue then check the transmitter Throttle mixing settings for the same. If the issue is still not solved then try changing the ESC
Bangladesh
💯💯💯💯💯💯💯💯💯💯💯💯💯💯
Plz tell me the range of this transmiter?
800m to 1000m
@@AutomationDude thanks
Bhai esc kaha se lu
Robu.in for more rc plane related info please subscribe ua-cam.com/channels/BX_dM9osN-pTEU__Dtf5Rw.html
Meri drone ki battery Ek sath nahi kaam kr rahi hai
Do i have to calibrate all my esc's?
Yes
Bhai mene jaise hi esc ko power diya toh esc jal gya usme se smoke aane laga aur receiver ka red light bhi ny blink hua please help give solution
Please reply
Motor agar jyada current khane wala hoga aur esc is not able to provide the current then uss case mein esc jal jaega. Use proper esc with proper motor and propeller. 1000kv ko 10x45 prop 30a esc lagana. 1400kv ko 9047 prop 30a esc aur 2200kv ko 6042 prop 30a esc
Bhai mene 1000 kv motor ke sath 30 A. Esc lagaya aur receiver ko join krke jab lipo se input diya tab esc jal gya ,kisme problem hoga bro please reply🙏
@@shootergamers2032 Did you give +ve terminal to +ve and -ve terminal to -ve?
Bhai hame total 4 esc's ko calibrate Krna hoga Yani ki Aapne video me ek ESC aur ek motor lagaya hai to hame total 4 esc's and 4motors ko Krna hai
Individual calibration karna hoga
Sirf ek ESC ko krne se sara ESC calibrate ho Jayega automatically jaisa Aapne video me ek ESC ko Kiya hai to Bache 3 ESC to ye 3 ESC automatically calibrate ho jayega
Kha milega ye
robu
Bhai esc pehle se calibrate ho to
ask on "gentleplane rc" channel
B
Bhai agar transmeter se pehle receiver on kiya to
No problem. Wahi karna hota hai
Bhai receiver ko maximum kitna voltage de sakte hai
All kits cost
ua-cam.com/video/dwX4wV0n-XA/v-deo.html please see this video
Do a give away I want it
What to do if binding cable is not there?
use female to female jumper cable and connect it to the first and 3rd point of the receiver BVcc port
Bhai mere DJ per make problem hai ISI bar jo hai God Shiva matlab 50% Mein kam karta hai Josh Kajol joystick use 50% Karenge to vah motor chalega Varna Nahin chale gaye kya yaar🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Motor moves but servo can't. Why?
connect servo cable properly.. signal positive and negative
Bhai agar esc pehle se calibrate ho to
ua-cam.com/video/hjI5A8gV8RQ/v-deo.html subscribe this rc channel and ask his owner