Black & Decker Cordless Screwdriver Battery Upgrade | Ni-Cd to Lithium Battery | Do It Your Self
Вставка
- Опубліковано 30 вер 2024
- Hi Friends,
I have upgrade my black & decker screwing machine with lithium batteries, watch my full video you can also upgrade your drill or screwing machine.
Buy Link :
1.) Batteries : makerbazar.in/...
2.) BMS : makerbazar.in/...
Lithium batteries have a different charging algorithm and need a special charging circuit. Be careful with this setup. It's potentially dangerous.
I have used BMS board for Lithium batteries. Thanks for caring..
Bhai mai ey karidna sochrahu mera cctv kaam hey just 1inch screws use karghahu ey tkheykya meku naitho ap meku 2000ke andar ek best wala sujjest karo
www.moglix.com/ingco-cdli12415-s12-12v-13ah-lithium-ion-cordless-drill/mp/MSNL5GLO7G6PK4
This is best under 2k, main bhe 1 saal se use kar raha hoon a brand.
My screw driver is 3.6 v skill, can i upgrade it with 3.7 v battary and how many battary? Abhi usme 1.2 ki 3 hai
Yes you can use 3.7v lithium battery with BMS board. You can use 1 or more batteries in parallel if you have space in your screwing machine.
@@ateebk if I used 3 battery should I use the same board 7.4
Hii sir reply my question
Yes?
how much original charger voltage and ampier ?
6v 1.5amp
@@ateebk thank you😍
Metal or plastic
Plastic
You have modified motor input 4.8 volt to 7.9volt . It will not damage the motor? What is the rating of motor
You are right it's 4.8v motor, but it's working fine and also RPM has been increase. I was using it from many days without any issue.
Kindly checkup the actual motor rating. If it is 3 to 9v it is ok no issue. If any thing else you can change the motor 6 to 9v
Motors are made to manage little higher voltage. There is no issue using 7.4 instead of 4.8.
My screwdriver has three 1.5V AA batteries. What to do with that?
Try with one 3.7v lithium battery.
Hello, do you have the connection cable diagram of the model you show in this video? In my decker, the cables got disconnected not sure why...
Hi, sorry i don't have diagram, check PCB board closely, you will find a soldering location.
Thanks a lot for your reply. I was checking the PCB and i have to say it is not easy to find out which cable goes where....@@ateebk
Link plz kaha se buy kiya . sysks 200 trimmer pro link plz,, or sahi h kya wo
Take a look at this BLACK+DECKER With KC4815-IN Screwdriver Bit Set on Flipkart
dl.flipkart.com/s/Q89i9ONNNN
dl.flipkart.com/s/Q8zoyyNNNN
Sir gear metal ka he ki nehi please reply me😢
Sare gears metal ke hain, bohat he aache quality hai, I'm using from more then 1yr.
Ripering kahaa hota hai
It's DIY video, aapko aata hai toh khud karna hoga..
Do you use the same charger?
No, I'm using 8.5v charger.
@@ateebk how much original charger voltage and ampier ?
Connections clear nahi dikhaaya aapne for example bms board se charging ka connection kaise kiya aur bms k output me jo ek bm point hai uska connection kaha kiya,pura connection ka diagram agar dikhaate to jyaada clear ho jaata.
Sure, main eak chota sa detail video banata hoon.