Hey ! I'm very intrested for making this drum machine. Did you change something on your circuit ? because the one you linked doesn't really match with what you made, I mean the trigger system isn't the same as yours. So if you have another schematic I'm very intrested to check it, for getting more details.
@nekosaburo thanks, so I need to connect the trigger out to the input of a drum module. And then I should connect all drum audio out together into a potentiometer for volume ? And what power supply you used for supplying 15V and 14.6V ? Sorry for asking a lot of questions, I just want make sure to no commit any mistakes 😅
「DRUM BOARD」の出力はすべて接続する必要はありません。しかし、「CYMBAL BOARD」の3つの音声出力は接続しないと、ノイズの音色が変わってしまうので、接続する必要があります。 You don't need to connect all of the "DRUM BOARD" audio out. However, the three audio outputs of the "CYMBAL BOARD" must be connected, otherwise the noise tone will change.
+15Vの電源はACアダプターと三端子レギュレーターを使いました。 +14.6Vの電源は、回路図の通り+15Vの電源から抵抗と電解コンデンサーを使い作りました。電圧は抵抗値で微調整ができます。 The +15V power supply was supplied from an AC adapter and a 3-terminal regulator. The +14.6V power supply was supplied from a +15V power supply using resistors and electrolytic capacitors as shown in the schematic.Voltage can be fine-tuned by resistance value.
素晴らしすぎて恐れ多いです
Very nice
Wow! It sounds fantastic! I would love to build one of these, thanks for sharing! 😃🥁
Now this is something different snd I love it!
Thanks
Hey ! I'm very intrested for making this drum machine. Did you change something on your circuit ? because the one you linked doesn't really match with what you made, I mean the trigger system isn't the same as yours. So if you have another schematic I'm very intrested to check it, for getting more details.
Yes, I made changes to the trigger circuit. I've added a schematic to the link.Please check it.
@nekosaburo thanks, so I need to connect the trigger out to the input of a drum module. And then I should connect all drum audio out together into a potentiometer for volume ? And what power supply you used for supplying 15V and 14.6V ? Sorry for asking a lot of questions, I just want make sure to no commit any mistakes 😅
「DRUM BOARD」の出力はすべて接続する必要はありません。しかし、「CYMBAL BOARD」の3つの音声出力は接続しないと、ノイズの音色が変わってしまうので、接続する必要があります。
You don't need to connect all of the "DRUM BOARD" audio out. However, the three audio outputs of the "CYMBAL BOARD" must be connected, otherwise the noise tone will change.
+15Vの電源はACアダプターと三端子レギュレーターを使いました。
+14.6Vの電源は、回路図の通り+15Vの電源から抵抗と電解コンデンサーを使い作りました。電圧は抵抗値で微調整ができます。
The +15V power supply was supplied from an AC adapter and a 3-terminal regulator.
The +14.6V power supply was supplied from a +15V power supply using resistors and electrolytic capacitors as shown in the schematic.Voltage can be fine-tuned by resistance value.
Sounds amaizing! Do you have a link to the scchematics? ありがとう
I posted the schematics.Check out the link in the description.