I had the Kicker 12 - 500 and both units went bad (different issues) Crutchfield was great and is sending me this unit in the 500 version, hope is sounds as good as the Kicker and more reliable. BTW - Kicker has now discontinued that unit, HMMMMM
Hello ! What is the best amplified sub ??? Or a top 3 , this one sound really good i want BIG BASS , i wanted the Alpine Swe 815 but i eon’t know now 😅
Been thinking about getting this for my car, I’m worried it’s not gonna be enough though. I have a 2016 camry with the base audio system no sub but I really want some thump and bass. Is it gonna be enough?
It's enough. I ran this in a Volvo S80 (which is a way more insulated / premium built car, sedan) and it bumped plenty! Will it rattle the mirrors? Yes, actually, but not alot. You need to go 500W RMS and beyond if you want gutwrenching interior-rattling base. Sounds fantastic since it's a sealed sub. I run a Rockford P3D4 (the big daddy) in my Mustang and obviously that's way louder but it's a ported box ontop a significantly beefier sub with twice the power of this. This sounds better in alot of songs unless really high volume. I just prefer me a sealed box sound...
I'm thinking Rockford did a bit of a dirty here, since yes, two 10 amp fuses are not associated with 300 watts RMS. The subwoofer speaker itself is probably rated 300W RMS since it's a P3 shallow sub buuuuut the amp probably runs at 2 or 1 ohm and sends 200W RMS its way. It's my guess.
We have this in our Jeep and it sounds super boomy, not sure how else to explain it. Kind of wondering if something is wrong. If I was trying to listen to dj magic Mike it would be great. Any ideas?
4:04 How do you make it move hard? I have the same sub connected with RCA, but even in high volume doesn't move like yours. I have to make the gain all the way up to make it move a little. I don't know if it is my radio (it is a Chinese stereo) or if need to change from RCA to high Input. Thank you.
Sir u need to use high level inputs Or u can use high level to low level adapter I also had same problem on my Chinese android head unit but now it’s fixed
My buddy hooked me one up. It sounds nice in my new 23 civic hatch. I had a p3’ dual fosgate box . Didnt want to rattle the car apart! Yes p3’s at 1 ohm even cut down hit hard still.
Sub used linked in the description of the video!
I have Clarion Apple CarPlay to a pioneer I am just wondering what’s the best thanks for the support for Woods D
I have this powered subwoofer in the trunk of my car. It sounds fantastic and adds plenty of bass to a stock audio system. Worth every cent.
Can you and another amp to this if so how thanks great video
Sir suggest best subwoofer house need to shake and full vibration and amplifier also plz reply as ur best
I had the Kicker 12 - 500 and both units went bad (different issues) Crutchfield was great and is sending me this unit in the 500 version, hope is sounds as good as the Kicker and more reliable. BTW - Kicker has now discontinued that unit, HMMMMM
A big fan off the rockford fosgate line. Also what was the demo song? 😅
It should be labeled at the bottom of the video description!
@@ProvoBeastAudio thankyou
Are those not 10A fuses? You said 30A
Hello ! What is the best amplified sub ??? Or a top 3 , this one sound really good i want BIG BASS , i wanted the Alpine Swe 815 but i eon’t know now 😅
Ported:
JL audio microsub+ 12" & 10".
Rockford fosgate p500
Sealed
Audison 10 AS2
JL audio power wedge+
Rockford fosgate p300
Hi, I have the Rockford 10 inch sub with the build amp was just wondering what is the bestway or the best settings to have
All depends on the vehicle, electrical, signal source, etc where to set the gain. Crossover can generally be set around 80hz.
Been thinking about getting this for my car, I’m worried it’s not gonna be enough though. I have a 2016 camry with the base audio system no sub but I really want some thump and bass. Is it gonna be enough?
For the simplicity, it’s decent yes. If you want real bass, a bigger amp and sub will be needed. Here is a bass package: amzn.to/3NbmVXS
It's enough. I ran this in a Volvo S80 (which is a way more insulated / premium built car, sedan) and it bumped plenty! Will it rattle the mirrors? Yes, actually, but not alot. You need to go 500W RMS and beyond if you want gutwrenching interior-rattling base. Sounds fantastic since it's a sealed sub. I run a Rockford P3D4 (the big daddy) in my Mustang and obviously that's way louder but it's a ported box ontop a significantly beefier sub with twice the power of this. This sounds better in alot of songs unless really high volume. I just prefer me a sealed box sound...
@@ProvoBeastAudio it catches fire bro
how come the bass doesnt kick in until the volume is like 80% plus?
Turn your gain up a lil bit
two 10a fuses only maxes the watts @ 240W..
I'm thinking Rockford did a bit of a dirty here, since yes, two 10 amp fuses are not associated with 300 watts RMS. The subwoofer speaker itself is probably rated 300W RMS since it's a P3 shallow sub buuuuut the amp probably runs at 2 or 1 ohm and sends 200W RMS its way. It's my guess.
We have this in our Jeep and it sounds super boomy, not sure how else to explain it. Kind of wondering if something is wrong. If I was trying to listen to dj magic Mike it would be great. Any ideas?
Boomy? As in what a sub is supposed to do?
@@Mydadlikesmen to a point.
Where did you end up setting the gain, crossover, and bass boost?
We're not here to give you every single detail. It's called get up off the couch and do your homework.... come back after you try it yourself....
I don't think he was asking you @@TheDaman1111
@paulrojina Who's asking you to reply tho?
@TheDaman1111 Are you a child?
@sekou3758 I'm just trying to help them push beyond their comfort zone and learn something new. No need for name calling and insults.
Two 30 amp fuses? I see 2 10 amp fuses
What amplifier you use boss
The amp comes installed in the box already
30 amp fuses they look like 10 to me
4:04 How do you make it move hard? I have the same sub connected with RCA, but even in high volume doesn't move like yours. I have to make the gain all the way up to make it move a little. I don't know if it is my radio (it is a Chinese stereo) or if need to change from RCA to high Input. Thank you.
Sir u need to use high level inputs
Or u can use high level to low level adapter
I also had same problem on my Chinese android head unit but now it’s fixed
My buddy hooked me one up. It sounds nice in my new 23 civic hatch. I had a p3’ dual fosgate box . Didnt want to rattle the car apart! Yes p3’s at 1 ohm even cut down hit hard still.
Actually all the knobs on 0 and still have a lot of bass
Where was the installation part😅😂
ua-cam.com/video/DRAP3I6eAvE/v-deo.html
Holly crap he didn't show the hook up?.. the installation... crap
Looks weak and under powered like and pre set up box I seen this and got quoted 560 when the unit itself goes for 350 online.