Any one love skyteam ace 125?? There my beautiful bike as i has upgrade everything on it but few need to do that all 😊 walk around and listen the engine... Sorry cant talk cos am current deaf.
nice bike you got there hubys got one loves it it goes hard kit it jet it replace cdi and coil with performace unit and it will go remove air box replace it with perfarmace air intake replace exhaust or remove baffles from inside just cut rear of muffler and it will go hard for you huby gets 115 plus with these mods cheers
+RoadKillzine Yeah you better buy it I knew you would love it as I haven't problem with it since from the 2014 never broken down yet yet! brilliant bike ever I has ride also yes just slightly problem with 3rd gearbox cause gear select or fork teeth damaged as rattle I can hear it... well engine still very strongly so far like Base on honda CG 😉
+RoadKillzine Oh you only 5ft 5inch as am 6ft 1inch tall well you can buy 150cc kit or complete new 250cc engine fit into the frame to make you free mind??
hi there i just got one of these little beautys. havint some issuies with my bar end mirrors, seems to be steel plugs in the ends of the handlebars. was going to just drill through it, any advice? thanks mate!
I'm also considering bar end mirrors on my ace - how did you open the bar ends? is there a screw, did you drill or knock them in? I've read so many different ways, so know I'm not sure ...
hi mate. Yes you can knock it in with scanners bar and hammer are best to safe as do not use drill or cut, mate. good luck with new ends mirror when fitted ;-)
I just got one, added fat tyres, custom seat, clip-ons, bullet indicators and an old skool stop light..........love it
It's beautiful! Love the red frame and black tank etc. Sounds good too!
Thank you mate 😎
Beautiful, beautiful bike mate... My hat's off to you.. Well done :]
Thanks cheers 😎
Nice to see the fantasy numbers game being played. I presume you mean KM/h
Oh sorry yes it's 145kmh however cheers
For 145kmh, that's decent !! Thinking of getting my hand on one of these or the buccaneer 250 vtwin
Beauty 👌🤘
nice bike you got there hubys got one loves it it goes hard kit it jet it replace cdi and coil with performace unit and it will go remove air box replace it with perfarmace air intake replace exhaust or remove baffles from inside just cut rear of muffler and it will go hard for you huby gets 115 plus with these mods cheers
very beautyful,cheers
Yes definitely thanks 😎
Very nice ,ride safe.
Will do, Cheers mate 😎
Yes as i love it every mins well am 6ft 1in tall also no problem with it so far 😊 glad you all like my bike!!
Hello, beautiful bike!! Did you paint it in black...?
Love the bike! Where can they be purchased?
Nice bike man!
Thanks 😎
hi thank you for like my bike and just simple as hammer with spanner bar and hit the end handlebar as it went going in mate but don't drill it, ok?
thanks for love my bike... i already have a upgrade everything on my bike now and run faster hit 90mph (145kmph) on long road 😘
+Karl Saunders Hi, what did you do to your bike? And where can i buy that exhaust?!
Hey, am doing a upgrade the CDI, big carburetor with curvy air filter, rear&front sprockets, down pipe and exhaust... Good bike so far..
Nothing wrong with that yet so all good and performance also engine still stronger but slightly problem with the third gearbox that all 👌
+RoadKillzine
Yeah you better buy it I knew you would love it as I haven't problem with it since from the 2014 never broken down yet yet! brilliant bike ever I has ride also yes just slightly problem with 3rd gearbox cause gear select or fork teeth damaged as rattle I can hear it... well engine still very strongly so far like Base on honda CG 😉
+RoadKillzine
Oh you only 5ft 5inch as am 6ft 1inch tall well you can buy 150cc kit or complete new 250cc engine fit into the frame to make you free mind??
hi there i just got one of these little beautys. havint some issuies with my bar end mirrors, seems to be steel plugs in the ends of the handlebars. was going to just drill through it, any advice?
thanks mate!
I'm also considering bar end mirrors on my ace - how did you open the bar ends? is there a screw, did you drill or knock them in? I've read so many different ways, so know I'm not sure ...
hi mate. Yes you can knock it in with scanners bar and hammer are best to safe as do not use drill or cut, mate. good luck with new ends mirror when fitted ;-)
Hey Nice bike! :) how tall are you And is it comfortable to ride with highed?
Am 6ft 1in and yes definitely lovely to ride my bike
do you advice to me that for fırst bike ?
I just mounted this end Can on my bike and it is extremely loud... Is there a way to silence it?
Yes definitely very extremely loud and it already have muffled inside the exhaust
what exhaust do you have?
Cafe racer exhaust
Ade sticker L la
the handle bar bolts are rusty
Yep cos of the weather!
Your*
Top speed please and PS
Top speed is 90mph (145kph) everything upgraded and sorry what is PS?
@@karlsaunders1769 horse power
Oh HP, not PS. so can't remember cos I upgraded lot on this bike as I think it's 17hp not sure..
@@karlsaunders1769 is the 125ccm?
150ccm