Hobart 140 Handler MIG/FCAW Review
Вставка
- Опубліковано 26 чер 2024
- Honest review of the Hobart Handler 140 MIG/Fluxcore welding machine.
I was running 035 FCAW
I didn't mention all of the details in the video so here's a list of pros/cons.
Pros:
Common and standard parts
Accepts 2 sizes of wire spool, and 3 different diameters
Relatively light all things considered
Beginner friendly
Nice range of wire feed speed
Polarity guide inside cover to help switch between MIG/FCAW
Able to do true MIG or Fluxcore - I would assume it could do dual shield FCAW if able to find small enough spool of dual shield FCAW wire
Simple - Beginner friendly with professional quality but minimal settings to figure out + a guide inside the cover for settings
Excellent for light steel/stainless such as autobody
Cons:
Only 115V
Limited heat settings 1 - 5
Can be a little temperamental at times
No aluminum spool gun compatibility
Not great for heavier steel due to lack of heat - would require a lot of beveling and prep work on thicker material
The super janky chipping hammer/brush that was included - Навчання та стиль