This adapter working with ecu sigas 2.4 light from bigas.it? Whats is pins sequency from building this cable? In my ecu has 3 cable ter, Green and Black and I not know is grd, tx, rx! You can explain to me?
Hi! I am interested in building my own interface for BRC Plug n Drive which is 3-pin connector. What equipment will I need. Please post links if possible. :) Many thanks in advance!
nonsenses......What are the parameters for the RS232 communication? You did not tell the most importand. For a made communication cable to work we must know: 1. 8 bit data or 7 bit data? 2. 1 stop bit or 2 stop bits? 3. Parity even, odd or none? 4. What is the baud rate? 5. Is there any handshaking? (XON XOFF....) Are theese parameters different for the various programs? The solder instructions are not enough.......All that parameters are preprogrammed on the ready made cables.
at another post I found: 9600 baud 8 data bits 1 stop bit No parity No flow control (XON, XOFF) I dont know on what LPG program they work, or if they work on all. I think that are the default values for the PL driver
Worked for me. I had to swap the GND with +12V pin. Thank you!
Bro can u explain me?
@vladtimofte5983 Hello. I did as in the video. There was no connection whatsoever. (Error C01 code) What did you do? I will be glad if you help me.
@@birkuliste8988Hallo have You now the answer? I have even the same Problem
i tried it aeb mp32 cng and it worked. cng interface cable costed me only 2 dollars😎
not work with me
I tried for MP32 CNG MIJO kit but not worked. Could you please share serial port setting?
Will it works for Lovato Smart Exr LPg kit ?
Thanks it working in lovato kit
not working on Tomosetto Ecm
kindly share the procedure
i have connected GND, RX and TX but not connecting on Tuning Software
@ it works on com port .lovato and tomaseto woth are same
Hello, very nice. This works on any lpg system? I have aldesa
Ac stage 4 plus cng ka liya bhi kam kara ga kaya
Did it works for KME Nevo?
It is not working for Lovato.
Can you do it for Lovato please
Mine is 4 pin lpg connector - could u pls help me with Bluetooth module or connection diagram ?
Congratulations for the content. Really helpful
Thanks for watching! See other videos on this channel 👍
Playlist for Mercedes W211 ua-cam.com/play/PL8irNmik4fC2amQhM2t14l6X1zQoOd9Pc.html
I am subscribed. Your videos taught me how to resolve the ir sensor on the driver door.
buona sera, grazie per il video, chiedevo le connessioni rx tx e gnd sono le stesse per i due lati oppure txrx rxtx? grazie
Hello if i connecting the software tells me failure C010 what is wrong?
This adapter working with ecu sigas 2.4 light from bigas.it? Whats is pins sequency from building this cable?
In my ecu has 3 cable ter, Green and Black and I not know is grd, tx, rx! You can explain to me?
Have UA-cam the answer?
Hi!, great video, do you have the scheme to build a diagnosis cable by AEB or Emer brand? thanks
No. Thx
Same thing just swap Rx tx
thanks
I am using cee2013 software it was showing error c01 how i fix that please share
Im with same error
A.e.b Mp48
It runs in BRC 5th generation?
Chgitem
I do not know
Which software do you use?
Downloaded from the Internet
Ic kon sa number ki ha
I need one cable
NOT WORKING ON LOVATO SYSTEM
Buenas
Извините, вы также можете сделать это с помощью ttl и p_01 аналогично, и вам также нужно скачать драйвер или просто как это в видео? спасибо от Перу
Hi, where can I find drivers for this usb chip?
I downloaded from the internet
Dear Amazing roads I bought the parts and test with my ecu and not conect do you had others sugestion?
no
I need prins vsı 2 software
hello how i can download this software on my leptop?
I took the program not from the Internet
Stag controller works in 12v logic..but you are using USB to TTL module...it works in 5v how can it work
Hi! I am interested in building my own interface for BRC Plug n Drive which is 3-pin connector. What equipment will I need. Please post links if possible. :) Many thanks in advance!
I lost links. I bought an aliexpress
Is it the same method for the BRC diagnostic?
How much I know yes.
www.ebay.com/itm/USB-BRC-SEQUENT-24-56-P-amp-D-SF-MTM-LPG-DIAGNOSTIC-INTERFACE-/121933451141
Did you mean it?
yes something like that... there are a lot of different variants like that. I have already tracked them in ebay but they are kind of expensive...
I don't understand but I wish I could do that
👌👌
👌👌👌👌
I need landirenzo cable.
M
Hi. Can I use an arduino pro micro instead of a ttl converter
I do not know my friend
how to download lovato easy fast software
You need authorized from Lovato company
@@waryo4747 Sir Mai Kaise authorise ho sakta hu mujhe batao mai ho na chahata hu
5ta generación funciona ?
I do not know
nonsenses......What are the parameters for the RS232 communication?
You did not tell the most importand. For a made communication cable to work we must know:
1. 8 bit data or 7 bit data?
2. 1 stop bit or 2 stop bits?
3. Parity even, odd or none?
4. What is the baud rate?
5. Is there any handshaking? (XON XOFF....)
Are theese parameters different for the various programs?
The solder instructions are not enough.......All that parameters are preprogrammed on the ready made cables.
at another post I found:
9600 baud
8 data bits
1 stop bit
No parity
No flow control (XON, XOFF)
I dont know on what LPG program they work, or if they work on all. I think that are the default values for the PL driver
Dear,can you send me softwer for atiker nice fast?Thank you very much.
I do not have English, I only have a Russian friend