Clearing DEF light flashing and NOX sensor codes on freightliner cascadia using OTR tool
Вставка
- Опубліковано 2 вер 2020
- Thanks for watching, If interested in ordering one OTR PERFORMANCE Reset tool use this link ,
otrperformance.com/products/d...
Coupon Code5% off
TRUCKINGTIPSDIY
AMAZON
amzn.to/3e434Xb - Авто та транспорт
Bye bye $ 280 just for conect the computer in the shop and tell you IS $ 4500 DOLARS FOR BLA BLA BLA ficking delinquent dealers...
I have one too, best tool i ever brought for my truck.
Just a heads up, brother, that J1939 wasn't part of the Brake fault code, it's the network protocol for the diagnostics, standard for a lot of trucks out there. The brake code (SPN 0639 FMI 11) was what was setting off your ABS light, code went away same time light did. Likely system was confused after the reset until you got enough motion for the speed sensor to generate enough input that the system could reorient itself.
Thanks for the video, though... had seen that tool before and couldn't remember where to find it, my truck has a DPF issue that throws me a code frequently and that light hangs for so long. Better, I want to give it a 4-hr regen every week or so and avoid the problem in the first place. Now I know what I was looking for and even have a link to the store for it since you linked it in the description. Appreciated!
mỗi lần anh ra clip mới là em xem đi xem lại wai lun
I love this video gracias brother.
Just in time brother, thank you and may God bless you and your family. I was looking for a tool which could exectly help in this kinda situations.
So is this tool just good to force regen in order to keep going afterwards. But are the problems to those codes still need to get fixed when you get back home? How far can you drive before it appears again?
I get the check engine with a code eec 61 spn3936 fault 18 but no regen sensor turns on, so I think mine is something else due to low pressure range as stated. Any recommendations
Does it work for Cascadia 2018 ?
Eso me acaba de suceder y tube que meter el camión a el TA aver si pueden repararlo ayer antes de parar puse Def y ahora en la mañana comenzó a manejar por 4 horas y pues eso me paso, pienso lo que tu dices, Def sucio.
ERES UN PERRO HERMANO MUCHOS GRACIAS.
Gracias!!
Me aparecen los mismos códigos que es lo que tiene dañado ?
Where can I bay that thing you have, thanks God you know how to used at least that get u out of the freeway
I have it on the description, use my code to get 5% off
Last week I was having some issues, and it came out been 1 bad injector , after I replaced and cleaned the other 5 , I drove the truck like 55 miles and now I’m having exact same problem like the video, I can’t complete a manual Regen, a had a mechanic with a computer that did a regeneration and def light keeps flashing plus red light is on and truck won’t go more than 5 mph , I replaced the 2 nox sensors and clean the others sensors, everything is clean and I’m still having def flashing, check engine light on and red light on , any advice please let me know, because I don’t know what else to do, thank for your video.
Did you figure out the problem? I’m having the same problem now.
I like your video bro. I’m going through the same situation, I had my filters clean but still getting the check engine light and DEF flashing light on. Do you mind telling me which device did you use to remove your lights and where to purchase one. Thanks in advance
I have a link in the description please use that link, you'll get a 5% discount, what code are you getting?
Send me the link where I can buy it...please..
otrperformance.com/products/dtc-aft-reset-tool-detroit-diesel?ref=fku_1aeznku
Coupon Code5% off
TRUCKINGTIPSDIY
How long can I drive with this light blinking?? It turned on today...
Como consigo el scanner
Que buen video wey ya estás profesional oyes cuanto vale ese aparato ? Es verdad que vale 800$ 😳😳
Gracias, si lo acavan de suvir a 800
@@TRUCKINGTIPSDIYNa bro ahora vale 900$ en Amazon eso y es mucho, cuando lo borras los códigos de problemas de emisión el camión queda andando bien ?
otrperformance.com/products/otr-reset-tool-detroit-diesel?ref=fku_1aeznku
Compralo en su pagina official en 800, si usas my codigo te dan 5% descuento,
TRUCKINGTIPSDIY
I have same problem check engine light and and def light flashing no code and derate motor 25 percent and after 300 miles goes off what problem brother
this happened to me already you need new dpf filters pray its not your one box
that's not always the case, some trucks just need a reset, i had a mechanic i needed a new one box turned out to be 2 bad injectors,, dont trust all mechanics
I had this same problem. The SCR box is going bad. Trust me I know. I have the tool to clear the codes as well. You can clear the codes but they WILL come back after a week or two of driving. I hate to be the bearer of bad news but that is the one box telling you that it is nearing the end of its life cycle.
yup happened to me already
that's not always the case, some trucks just need a reset, i had a mechanic i needed a new one box turned out to be 2 bad injectors,, dont trust all mechanics
Is this the same as clearing the def codes?
Yes
Thanks again
Where do you buy it.from?
Check the link in the description
How many miles on ur truck ?
700k +
TRUCKING TIPS DIY thanks for reply
Cuanto cuesta esa computadora que usas para reparar o borrar las luces
Tengo el link en la description, cuesta como700 dolares
@@TRUCKINGTIPSDIY gracias y suerte en el camino espero conocerte un día y claro encontrarte
Gracias amigo!!
Mines does this i just hold the regen button it does it takes about 40mins and after a few days the check engine light goes away
Doesn't work on all units.. just a heads up
Is this old Video?
no i just made it today,
Where do I get it . And how is it call?
Off your cruise keep driving, truck will automatically regene,