Can you explain the setup between the firewall and the access point How did you connect the ap to the firewall? Did you use trunk port and allow all vlan
### Physical Connection: 1. **AP to Firewall Connection**: - Connect the AP to the firewall using an Ethernet cable. This typically involves plugging one end of the cable into the AP's Ethernet port and the other end into an available port on the firewall. ### Configuration: 2. **Firewall Port Configuration**: - **Access Port (Single VLAN)**: - If the AP only needs to serve one VLAN, configure the firewall port connected to the AP as an access port and assign it to the desired VLAN. - **Trunk Port (Multiple VLANs)**: - If the AP needs to serve multiple VLANs, configure the firewall port as a trunk port. This allows the port to carry traffic for multiple VLANs. ### Steps for Trunk Port Configuration: 1. **Enable Trunking on the Firewall Port**: - Set the port connected to the AP to trunk mode. This can usually be done through the firewall's web interface or command line. 2. **Allow VLANs on the Trunk Port**: - Specify which VLANs are allowed on the trunk port. This ensures that only the necessary VLAN traffic passes through. ### Example Configuration: Here’s an example of configuring a trunk port and allowing VLANs on a Cisco firewall: ```bash interface GigabitEthernet0/1 switchport mode trunk switchport trunk allowed vlan 10,20,30 ``` ### Access Point Configuration: 3. **Configure VLANs on the AP**: - Ensure that the AP is configured to handle the necessary VLANs. This involves setting up SSIDs and tagging them with the appropriate VLAN IDs. ### Example: - **SSID "Corporate"**: VLAN 10 - **SSID "Guest"**: VLAN 20 - **SSID "IoT"**: VLAN 30 ### Summary: - **Physical Connection**: Ethernet cable between AP and firewall. - **Firewall Port**: Trunk mode with allowed VLANs specified. - **AP Configuration**: SSIDs tagged with appropriate VLAN IDs. This setup allows the AP to handle multiple VLANs, providing network segmentation and enhanced security.
Thats swome bro, Worked for me thanks a lot
Don't forget to subscribe" your motivation and make me lots
Thanks 👍 🙏
Can you explain the setup between the firewall and the access point
How did you connect the ap to the firewall? Did you use trunk port and allow all vlan
### Physical Connection:
1. **AP to Firewall Connection**:
- Connect the AP to the firewall using an Ethernet cable. This typically involves plugging one end of the cable into the AP's Ethernet port and the other end into an available port on the firewall.
### Configuration:
2. **Firewall Port Configuration**:
- **Access Port (Single VLAN)**:
- If the AP only needs to serve one VLAN, configure the firewall port connected to the AP as an access port and assign it to the desired VLAN.
- **Trunk Port (Multiple VLANs)**:
- If the AP needs to serve multiple VLANs, configure the firewall port as a trunk port. This allows the port to carry traffic for multiple VLANs.
### Steps for Trunk Port Configuration:
1. **Enable Trunking on the Firewall Port**:
- Set the port connected to the AP to trunk mode. This can usually be done through the firewall's web interface or command line.
2. **Allow VLANs on the Trunk Port**:
- Specify which VLANs are allowed on the trunk port. This ensures that only the necessary VLAN traffic passes through.
### Example Configuration:
Here’s an example of configuring a trunk port and allowing VLANs on a Cisco firewall:
```bash
interface GigabitEthernet0/1
switchport mode trunk
switchport trunk allowed vlan 10,20,30
```
### Access Point Configuration:
3. **Configure VLANs on the AP**:
- Ensure that the AP is configured to handle the necessary VLANs. This involves setting up SSIDs and tagging them with the appropriate VLAN IDs.
### Example:
- **SSID "Corporate"**: VLAN 10
- **SSID "Guest"**: VLAN 20
- **SSID "IoT"**: VLAN 30
### Summary:
- **Physical Connection**: Ethernet cable between AP and firewall.
- **Firewall Port**: Trunk mode with allowed VLANs specified.
- **AP Configuration**: SSIDs tagged with appropriate VLAN IDs.
This setup allows the AP to handle multiple VLANs, providing network segmentation and enhanced security.
If you need more clarity email me
Thanks for the support bro