Why I Use Fluid Heads for Still Photography.
Вставка
- Опубліковано 6 лют 2017
- (Links Below) Please check out my 2020 updated fluid head system and setup video: • Approaching the Scene ... Fluid heads have a great number of advantages over ball heads. If you don't know about fluid heads, this will explain them. If you think they are too complicated, heavy, or expensive, this will debunk that. Here are links the gear in this video: www.hudsonhenry.com/atslinks
www.hudsonhenry.com/tripods - Наука та технологія
I'm a long time photographer new to video, and searching for a fluid head has brought up a bunch of questions for me. You just answered them all in 11 minutes! This makes so much sense and is exactly what I am looking for. Thanks for the helpful info, I'll be subscribing!
So glad. Thanks so much!
So Glad to help!
Just wanted to shout out a big THANK YOU Hudson! for turning me onto the fluid head option. After watching all of your videos and thinking hard about it, I consolidated all of my tripods into one set up - an RRS 24L + RRS Ta-2-LB leveling base + Manfrotto MVH501AH head + Kirk MVH500-BQRV2 A-S adapter. Yes it was expensive, but I use it for EVERYTHING -- landscape, long lens birding w/600mm and for video work. It works so well that I've sold my traveler, Series 3 and Series 5 tripods and Wimberley head. Shooting just got a little easier with less hassle thanks to you!
Thanks so much for that feedback Gary! Makes my morning. :)
@@HudsonHenryPhoto You're more than welcome! Oh yeah, and that suggestion of wrapping the tripod legs with cork handlebar tape is just brilliant! WAY better than the cheesy foam wraps. Handling my tripod has gone from a chore to a pleasure. Yeah, call me crazy.
Thanks to your videos, I have renewed my 14 year old tripod and now I have a new Leofoto 284CEX and a fluid head with an L-bracket and an adapter to orient the camera correctly on its axis. Your videos have been of great help and now I just hope I can go out to test it properly.
Thanks! I was about to pick up a gimbal setup, but now I'll go with the fluid head instead!
Great rundown of the pros and cons of using a fluid head for stills, all my questions answered. Thanks.
Thanks for the great demonstration. This is definitely going to make me reconsider my long time allegiance to ball heads for still photography. .Especially since I end up having to carry a separate tripod and fluid head for the camcorder.
5mins in and I subscribed. I haven't even seen the rest yet (just paused to write this) or any other video you've uploaded.
Why? Because you've taken time to light and the sound is pretty good - plus your presentation is nice. If you've taken this much time, you must care and be passionate about your subject. So I subscribed that I will come back and check out more.
Okay... watching the rest now. Thanks.
Me too.
You’re so right! I do it for the last 40 years. Good video, thanks!
Thanks for the tip on the acratech leveling adapter. It's just what I needed.
Fantastic information in another very informative video. I was actually looking at getting a sidekick for my ballhead, now it looks like that whole thing may be changing. Thanks for the time and effort you put into producing content that actually helps still developing amateur photographers.
Adam. make sure you check out my later versions of this video and tripod updates from this fall. Also I have a guide with my latest thoughts at my links. www.hudsonhenry.com/atslinks
You just need an L-bracket and a good fluid head and that's it. Now I tend to shoot wedding formals with a tripod so to make every single photo level, and even if you didn't level perfectly you just fix the first one and then apply it to the rest in lightroom. I even got the same fluid head.
Excellent video. Answered questions in mind. Thanks man!
I have been trying to make up my mind about what head to get. This video answers my question. Thank you.
Thanks for a thorough explanation of the fluid head. I'm sold!
Thanks Anthony. I hope you'll check out ATS31 from a couple of weeks ago in my feed. It's got much updated thoughts and a step by step guide to setting the fluid head up.
I use the MVH502A for both stills and video. I'm really pleased with the level of smoothness and quality of the head.
I hear ya. I use the MVH500AH for mostly stills.
Hudson, I bet your responsible for many folks switching from the conventional ball head to a fluid head. You convinced me, and I have been shooting for years. Thank you for the tip.
Great to hear!
Brilliant video and you added the bits in the description. Star, SOLD
Hudson, I have been studying your panorama course at ON1 and especially the no-parallax segment. I have acquired the MVH500AH fluid head and am wondering if that can be used in place of the panning clamp (assuming I can manage the mounting of the camera/lens). Haoge makes nodal slider that is compatible with the 500AH and I can mount an Arca Swiss clamp to that gadget for the L-bracket. It seems to me that the center panning axis of the video head would be the same as the panning clamp. I realize this won't allow the more advanced pano setup but it would allow me to get started. Your thoughts?
Nice video - good points, knowledgeably presented. Subscribed. BTW just got a Monfrotto 502 fluid head and 546B legs - after 20 years with a cheap Cullmann it's like being on a different planet. Highly recommended. All the best, Rob
Good information! I am getting back into my photo (habit)/hobby after years of absence and was contemplating upgrading some (all) of my gear. On a whim, I purchased a Canon XF400 camcorder and a Manfrotto beFree video head tripod. I have and (old) Manfrotto 3011 tripod that I love to set up around my home and just plop a camera onto it and see what I can see. The old 3030 head HAD to go and this video convinced me to purchase a good fluid head as my main platform for the 3011.
Thank you for sharing your insight!
I am not even an amateur photographer let alone professional one but I also thought of what Hudson said in this video and already got a fluid head for still photography.
Hey! After watching this video I bought the MVH502AH (with a 190XPRO3 tripod). Thanks for your video, it was really helpful. I'll try to use one of those amazon links in the future ;)
Awesome video! to the point, informative, answered a lot of questions I had about the various setups.
Thanks so much Bobby. Be sure to check out my later takes on setting up fluid heads. There are several in my feed much more recent. I will be announcing a cool new arca-clamp / panorama option for the top of the 500AH really soon that I've been testing for Kirk Enterprise Solutions too.
Just found your channnel and have subscribed. Thanks for this video, I've never considered a fluid head for my stills work before,I always assumed they were much more expensive than the one demonstrated here, think I need to look into it.
cheers from the UK.
That Manfrotto really changed how I view support. Light, cheap, durable, and dead simple. You do need an L-bracket though and some clamps to mount on it's plate.
Hudson, I recently set up a similar outfit with the Manfrotto head, Desmond adapter for the bowl, Benro COM37C legs. For doing panos, I was wondering if you have a horizontal click stop between the fluid head and the bowl adapter or are you just eyeballing it. Just something with degree markings would help if making a multi-row pano. Thanks
definitely in on fluid, and was reviewing Manfrotto; curious your thoughts on the best one to pair with my just received Fuji GFX100 - I have benro carbon legs, Linhof ball+ quick plates etc. but you are making me rethinking the kit - also adding a tbd monopod for places where form factor does not allow a tripod. - thanks for your thoughts cheers
U just solved my shopping research problem (Vertical fluid tilting) which almost no heads did it well. 'Why not just use an L cage and mount camera vertically to tripod from the start'. Brilliant, Thanks a lot!
Fantastic video!! I am glad that you covered bird photography use too. Right now I am using a gimbal head, but I am having issues with vibrations. Do you think a fluid head would be more stable and cure my vibration issues? My tripod legs are already quite heavy duty with 40mm diameter carbon fiber top legs, so my guess is the issue is with the gimbal head. You can already see it in the viewfinder when I want to press the shutter. Plus, it isn't even that heavy a setup, I am shooting with a Canon 90D paired up with a Sigma 150-600mm Contemporary. I am guessing together with the battery grip on the body, everything added up is probably about 7 lbs? Would really appreciate to hear your take on this. Thanks in advance!
I'm sold I will be getting this setup. great video
Live that you talk about tripods. Nobody else does 😄 trying to use a tripod more
Just purchased a ball head and then considered returning it for a geared head..... Even with a geared head there is going to be a degree of re-composing, so I will be returning the ball head and just adding accessories to the fluid head....... Hmmmm I need a bigger bag now. I am glad I persuaded myself to watch your up-front and honest review... I am hungry to learn so have subscribed and also visited your website. Your gear page is full of helpful ideas for someone like myself and has taken some of the angst out of what fits what and the research of what to purchase.. Thank you for saving me a fortune!!
I so appreciate that note Chris. Makes my night. I think you'll be really, really happy. :-)
Great video, added it to my wish list. . .
Yeah, I'm having exactly that re-levelling problem with my ball-head every time I change the vertical angle.
Looks like we need that ball-mount thingy to level it. I'll watch the video again. :)
🙏🏼🙏🏼🙏🏼
You really should consider bagging the ball head completely and go with the fluid head instead. You won't regret it.
One can use this same Video Head on a "normal" tripod without the ball base. You will need to get a Levelling Base such as the Sunwayfoto (which I use), but the combination of your tripod and a levelling base will be a very cheap option.
I came here from your feature on PetaPixel. I'm glad I did. Subscribed and looking forward to going through all your videos. Nice relaxed style. I have to ask, though; what are the up and down arrow buttons hanging from underneath your desk? :) That's one cool-looking editing suite you have there.
BigGoucho me too, God I'm glad I came here!!!
nice revieuw...,is this a good tripod for the Nikon Coolpix P900 "the zoom-beast"? and can I also picture the moon and airplanes with it,high enough for me?I'm 6ft2...?sorry for all those questions...thnx in advance..because i'm very interested... ;)
Hi - great video and very inspirational. I have a RRS tripod, what do I need to attach this fluid head to a ArcaSwiss type plate to fit, without it falling off or becoming loose?
Hi Hudson, from here in the UK. Great videos, very informative.
I have just bought equipment on your recommendation, waiting for it, as I have just ordered it. I needed a sturdier tripod and fluid head anyway but further impetus after watching your videos on landscape photography.
I have been looking for dedicated equipment for panoramic multiple row shooting with degree markers. But I will now try the Manfrotto fluid head you have mentioned.
Have I missed something or not understood something properly, you use the Manfrotto fluid head, on a stable and quality tripod, with a leveling base you mentioned, nodal slider, and quick release plate? And that is it? No other specific panoramic photography equipment, like a dedicated multiple row panoramic photography device? And if I have understood your method correctly, could you please explain why you would use this method or equipment opposed to a dedicated degree marked multiple row head?
Please, ignore my stupidity, if I have misunderstood or I have not fully grasped your equipment choice. I am not a professional photographer, as you can probably tell from my questions, just someone with a passion for various genres of photography, including landscape photography. And someone who appreciates your videos and advise.
I just got a like new one of these from mpb! Soooo happy I did. I spent the whole day using it today and it was a absolute pleasure compared to my ball head.
Thx. Looking forward to the nodelpoint video
I am soooooo happy I stumbled upon this video.
Be sure to check out this later one too. ;-)
Great video. Does the plate comes with CP-39 clamp? What 1s the part number of the L-bracket? Thank you
Just bought a p1000 Nikon, new to this. Having issues while zoomed over 1500, cant stay still, I'm old. Any ideas on sturdy head and tpod? Thanks
Baaed upon your series of videos on the subjest I purchased a Manfrotto 502 initially for my Nikon 200 - 500 tele. I cannot believe how a smoothly a heavy lens like this moves. I also use a Manfrotto grip head for my smaller lenses but am willing to try this head with them. Perhaps the fluid head is the one head to rule them all. Thanks so much for taking the time to share!
u use a 502 video head for photos?
Awesome review of the head and so much more..... subbed
Very good video - very well thought out
I tr tried it with a professional fluid head from o'conner and I never gone back. But I get a smaller one...
This is why I just bought a fluid head for our church's DSLR camera with an extended lens that we use to do a live stream. I have the camera on a mic stand 7 ft in the air (mic stand on a desk), and it was a huuuuuuge pain to adjust a ball head, which would want to flop all over the place. We're trying to get it level, and slightly tilted forward, but the ball head was exceedingly difficult to get just right. We just want to set it quickly, and leave it.
Do you have a quick way to switch the camera to portrait orientation when using a fluid head?
maybe you can choose a tripod with 90 degree center colume and you can change all the angle, you can add our facebook:@milibootripod.cn and maybe you will be lucky to get our free product due to our promotion.
You sir; are the reason I bought a Manfrotto fluid head. Thank you.
Nice! So glad to hear it!
Amazing knowledge, thanks for sharing
Thanks so much!
Very informative, thanks
Hi, I really like the idea myself. I was looking to do something like that myself and found your video and now I know it is possible and works. What is your experience with Haoge clamps, are they sturdy enough to trust them with Canon 70-200 2.8 L IS II sort of a lens and 5D DSRL? I really like the idea of using them because they are not expensive and this way one can use that "L" bracket you have there and switch from vertical to horizontal that is so cool. Could you tell me what make is that "L" bracket (I don't know how to call, I see it for the first time here)? What sort of Arca Swiss plates do you use? Many thanks for the video, it was very helpful!
Those clamps have been great. But, please see my more recent food head video for an update. I'm pretty sure it's ATS #002. I detail the attachment system with some updates you'll want to see.
Thank you for the great videos. Jumped on this one after I googled how to take pics of solar eclipse and found your name. Maybe a silly question, but can I mount the the fluid head on my RRS tripod? I am in the BH-55 camp currently but would like to change. Will the L brackets I have now work or do I have to get different ones? Thanks!
Thank you! I have subscribed! Bought a couple of your instructional videos and am looking forward to the conversion video.
Such a great video - thanks for sharing! You have a new subscriber;-) Hope you can help me out here;-) I have the Manfrotto 055XPRO3 with a center column that tilts 90 degrees for overhead shots. I have a standard ball head and am thinking about buying something else.
I am looking for something to help me refine my food photographing as I find it takes way too much time. Both when I do overhead and straight on shots I find it difficult to get the lines straight and I find that once I tighten a screw in the setup and let go of hold the camera it drops a little and is not straight/in level anymore. Very annoying 😳
I have heard a bit about the Manfrotto Junior Geared Head and here about fluid heads.
My questions: What equipment would I benefit from to fine adjust my setup to the manfrotto tripod?
Would (how) I benefit from the Manfrotto 131D Overhead Arm?
Any other tips on how to struggle less to setup both for straight on and overhead shots that never seem to be even/in level etc for me?
Thanks a lot for any advice;-)
Thank you for your excellent tutorial!! I just came across the manfrotto nitro 612 fluid head. Any experience with it?
Hey Charles. Thanks so much for the kind words. I've seen that head. It's 2.5 times heavier than the 500ah I recommend. I think people worry about the fluid head load ratings, but those ratings are for smooth movements with video (pans and tilts) not locking down for stills. The 500ah is really the perfect head for stills and light video work. I use it like a gimbal with my 500mm. These larger heads like the 612 are clumsy for what i do and far too large and heavy. For dedicated video work with a bigger video rig I prefer sachtler heads. Look through some of my more recent videos to see some of the custom adaptations I've helped Kirk design for the 500AH and still cameras. I have links to my current setup at www.hudsonhenry.com/atslinks thanks again for the kind words. Stay safe.
There is the added expense of the leveling adaptor. For my equipment, $135 for the head, plus $150 for the leveling base adaptor. The Arca Swiss are about the $30 each as mentioned in the video
I caught this video just in time! My Vanguard SBH-100 is just not up to the task for my Nikon D750 with Tamron 150-600 G2 and 1.4x TC. In your opinion, will the Manfrotto MVH500AH be able to handle that setup as you demonstrated in your video?
Thank you for the reply! I appreciate it.
TLDR: Do you have any fluid head suggestions for a lighter mirrorless setups like a Fuji X-T2 with 10-24F4 and 50-150 F2.8?
I used to use a Gitzo off-center ballhead for a similar reason (being able to individually control pan and tilt) until the quick-release mechanism jammed on me in Moab (it refused to disengage and the only way I could remove my cameras was to twist it off the stuck quick release plate). I bought a Sirui G20X in a pinch and it has worked well for me as a ballhead... but I do miss the ability to adjust pan or tilt individually. That being said Manfrotto MVH500AH you listed weighs almost triple the weight of the Sirui (1.9 lbs vs 0.7lbs) has a lower weight capacity (11lbs vs 44 lbs) and it significantly more bulky. Maybe it's because I'm using a smaller full frame setup (Nikon D610, 16-35F4, 70-200 F4) with a Gitzo 2531 (3.1 lbs). Now I've actually started moving towards even lighter setups and was wondering if you had a fluid head recommendation for smaller setups.
Thanks for the suggestion. I feel like I am caught between opposing camps... to most people I know, I am the one promoting heavier supports for increased stability with my Gitzo 2531 legs (3-sections versus 4-sections sacrificing size for less moving parts) weighing in at 3.1 lbs. Several people I know are running ultralight setups like the Sirui T-025X Carbon Fiber Tripod with C-10S Ball Head which *altogether* weighs as much as the fluid head you are recommending. To me that is way too light and there is no point bringing such a light tripod if it is useless for stabilizing my camera... but I feel like there ought to be some happy medium.
Glad I found this video. A fluid head it is! Brilliant!
I apologize if this has already been asked but what is that very tall tripod in the background?
Great video. I had a frustrating experience last night trying to photograph the moon with my BH-55. I could not get the focal point to stay still on the moon. The camera kept creeping. Maybe I wasn't balanced, but your video showed me that maybe I should buy the fluid head. I was using a pretty large lens (Sigma 150-600 mm Contemporary) on a Gitzo Series 3 tripod. Am I on the right track to try the fluid head to resolve my issue?
I've had the same issue with my 150-600mm Sigma lens using several cheaper ball heads trying to compose stressful angles with it. Out of frustration about a year ago I just pulled the ball head off my large Joby Gorilla Pod and put it on my Manfrotto 290 and its been on that tripod ever since. It works great and doesn't creep at all with the big Sigma lens and has been the best cheap ball head I've ever used on a regular tripod. I use it all the time, it's the best and tightest locking cheap ball head out there in my opinion and I've been through several that even cost a little more than this Joby ball head that wouldn't work as well.
I have an Manfrotto MHXPRO-3W. I love the same things you talk about though my head is smaller. The only problem I have is shooting high vertical (sky, clouds, birds,night sky ect.) It's so compact and the handles are short that I have to mount it backwards on the plate. PEACE
Btw. Can the manfrotto fluidhead slide enough back and forward to be used for nodelpoint panos with 24-70 mm lens?
I would love to do whithout extra gear. Thx
Yes it can depending on how you mount your arca clamp. You can also use a longer manfrotto plate to get further back. Check out my more recent video on this head. Just search my feed for ats001.
Thank you! I M glad I found this older video, you know I always thought it was stupid of me too see the value in those fluid heads for stills. Everyone shot me down at the camera stores saying it’s for video only. So I being very new at the time I quickly accepted what they said. But I always wanted to get one for still and too use for video as well. Thanks for this one.
Check out my later videos. I have many updated thoughts on legs and adapting the head for stills use. I can't imagine using a ball head for anything but special applications where you can't level below (tilted slider or star tracker top mount).
@@HudsonHenryPhoto I've been using video heads for my stills photography for many decades, and its been really nice to watch your video and agree with all the advantages that you've mentioned. My favourite is a Vinten head with twin tube legs, and manfrotto quick release plates on all my cameras and lenses.
Only question is, how did you get verticual angles for photos?
In watching the prices on the 500AH swing wildly over the past few weeks, it is now very close to the 502AH (from reputable sellers). In looking at the reviews it seems the adjustable pan and tilt drag on the 502 can be useful. The main issue I am struggling with is the added weight (32oz for the 500 versus 56 for the 502). With the Acratech leveler at 8oz, it's 40oz vs. 62oz or around 1-3/8 lbs heavier. Since the prices are basically equal, in your opinion is the 502 worth the weight penalty?
I am heading to the Marin coast next week so I took the plunge with the 502. At my age I am not looking at a big climb so weight won't be an issue. We'll be at Point Reyes area so I hope to try some pano's and BIF shoots. The gear arrives on Monday so I have two days to practice. Will report back on the weight issue later.
I have a Fuji XT2 camera. Can someone please recommend a good tripod to go along with this fluid head? And will I need to purchase the plates he mentions in the video?
My budget for a tripod is around $250. I plan on doing some macro and long exposure photography, so image creep can't be an issue. Every tripod I've used has had this problem, and it seems every tripod in my price range seems to have complaints of this as well. Any advice would be appreciated. Thanks.
Hey Henry. Thank you very much. I'll consider that one. Now I have to decide between going with a Manfrotto 55 tripod w/ Manfrotto XPRO 3 way head or the combo you recommend.
Preaching to the choir regarding fluid heads, but I was fascinated how you flipped quickly the camera in portrait mode with some kind of Arca Swiss side clamp.What was that? I’ve been trying to find something like that but no idea what to Google. Thanks!
Great explanation and you don’t sound like a salesman. :) I love my fluid head for real estate photography and video!
Thanks Mary!
@@HudsonHenryPhoto Even if you are a salesman, it doesn't matter, bcoz you let us think out of the box from the conventional ball heads..Now, that's good !
Hi Henry!,nice video!.anyway, is this the Gitzo 3543xls or the Induro series 3...?., and what do u think between this 2 tripods...?.I have to buy one soon and i love the Gitzo but not the price....it is the Induro good enough or the Gitzo is really a different league...?.Thanks and i will appreciate your opinion.Ciao
Thanks for your quick reply Hudson..!!!
Great video, just got one with my Benro Video Monopod. Will also use it with my PlatyPod.
I have that same manfrotto fluid head and a bunch of regular ball heads. The fluid head is indeed very bulky and heavy. Much more than any of my ball heads. Maybe if i had a tripod with a leveling base (wich i miss a lot) i should use the fluid head more, even for photography, but still it is a heavy weight and takes a lot of space on my backpack, so most of the times i stick to ball heads. I guess it all depends on your type of work and what works for you.
Great advice and presentation.
Interesting. I have used a video head a few for photography and it works much better IMO, especially for something like a bokehrama.
For lightweight stuff I mostly use a tiny Joby BH1 ball head. Actually I use that a lot to make small videos.
Henry, thank you for this video. Can I ask you what L bracket do you recommend the Manfrotto Fluid Head?
So what'd you end up getting? I'm in a pickle here haha
Hi. Great video. Please explain how/why you use 2 Arcs Swiss Clamps. Thank you.
Funny you ask... I have the video for you right here. Hit me up on email off my site if you have any more questions.
www.hudsonhenry.com/blog/video-fluid-heads-for-stills-part-ii-connecting-cameras Whoops, there's the link.
Saw in peta pixel came here and oh Lord what a blessing!!!!! Looking forward to get schooled!!!!
Does the fluid head work safely in the cold? Is it actual fluid in the head that could freeze and damage something?
Love your set up
Great video. I'm convinced. But I want to do a lot of portrait oriented shots. What L-Bracket do you use on the camera?
5DMKII. I did find a used L-Bracket on eBay. I picked up a Manfrotto MVH500A. So far it's great. I had to modify it for a flat base. When I have enough money saved up, I'll get myself a proper tripod. Thanks for the great video.
Tremendous video at just the right time! I hate ball heads and now I can put my languishing Bogen 3001 to good use. Saved me having to buy another tripod like the mediocre BeFree.
Hi Hudson - I like your idea of using an L-frame on the camera, a quick-release arca-Swiss clamp block (clamp on top and ¼" threaded hole on bottom) holding the L-frame, with the block attached to the long Manfrotto plate with a 'camera tripod screw'. It means you retain the forward/back movement on the tripod for attaining balance, yet your camera is free if the Manfrotto plate when you're not using the tripod. My question: where did you find the block that sits between your L-plate and the Manfrotto plate. I've looked on B&H and Amazon, but could find anything. Is it a RRS piece? Hope you can help me. By the way, enjoyed your video - made a lot of sense. Regards Robert
Many thanks for the reply, Hudson. I've accessed the links and found everything. Very helpful.
was wondering which exact model number and size is the tripod you have in the video?
It's an LBF533 but they don't make that anymore. I've linked the grand stealth version that's current on my blog post with this video. There's an assortment of heights, leg counts and widths to choose from there. Mine is a series 3 for width.
I love this. I just bought the Manfrotto fluid head, the Acratech Level Base, and both clamps! I subscribed and thank you for making these videos. Forgot to mention I also threw down $115.00 on the Kirk "L" bracket. I hope you get a cut of this stuff!
Please be sure and watch the latest thoughts I have on Fluid Heads in ATS002. Yes, I do get a small cut from Amazon and B&H sales through my links. Thank you so much for using them. An aside, Kirk's products are incredible and they are also some of the nicest people you'll meet.
Awesome! Could I put a Manfrotto fluid head onto a ProMaster tripod? (ProMaster Professional XC525C Carbon Fiber Tripod)
You can, but you'll need one of these leveling adaptors to easily get level. amzn.to/2Gz3c2N I much prefer a tripod with a bowl mount, but the adaptor also works fine and lets you work with any traditional tripod like the one you have.
I'm a photographer, and I own two fluid heads. I am buying my first ballhead (acratech) psuedo gimbal hybrid to go on a studio camera stand, or to use on super light backpacking trips. But yeah the fluid heads are awesome for most use.
Hi there Hudson, love your videos!! Which tripod are you using in this video? Also, what do you do if you want to have control over the other axis with a fluid head that only pans and tilts?
Look at my tripods page and you'll see the latest gear I use and how the leveling adapters work... www.hudsonhenry.com/tripods
What L bracket do you use? I just bought the fluid head you recommended and now I'm searching for a bracket to make the transfer from lens easier.
Hudson Henry I'm currently using the canon 70D but plan to upgrade in the future.
Thanks. I just bought Jieyang 0506h Fluid video head.
What lens are you using?
Hudson Henry thanks for the video. I agree with. And really o can't see why everyone (photographers or videographer) don't use the fluid instead of other heads.
Question please recommend one compact lens for video work. I have nikon d7100.
Thanks.
Best choice in my understanding.
Can this be used for 600mm lenses ..
... and - is there a name for this basic piece which goes into the tripod? (The one you show in 2. nd film).
The best would be a direkt link to purchase it at Amazon, because I'm not sure if I will get it in Switzerland. Therefore it's good to habe the exact names of all the parts. Thank you very much Hudson!
No worries. This is a 3 year old video. Check the one I posted today and my links: www.hudsonhenry.com/atslinks
I love it, however its main feature is also a drawback for astrophography: it doesn't allow any roll, which is important for framing astro objects.
I do the same thing. I use a Manfroto MVH500AH fluid head because I like how easy it is to frame things.
Check out the updated setups. :) www.hudsonhenry.com/tripods this vid is well over 3 years old now.
I can not find this head that is detachable from the ball base (the AH model you show) for less than $168 on Amazon, Has the price just gone up? Your setup there looks like it requires much more expense. You have the ball base witch is separate from the AH model. So there is cost there. Then you also must be using a 60-75mm adapter since I can't find a decent 60mm bowl tripod. Then what is the tripod you are using there? I watched your review and was very impressed and bought the A model not realizing there are two models. It would have been good of you to mention that. Now I don't know what to do. Perhaps return it for the A model. Any thoughts of yours would be appreciated. Thank you.
Thank you
Great video, most helpful.
Thanks! Be sure to check out the updated video I just did. My thoughts have evolved and it explains the assembly in detail. ua-cam.com/video/j1h8YrcjtjY/v-deo.html
I'm using Manfrotto 608 and was able to sell my gimbal head in favor of the counterbalance on the Manfrotto.
Hi!which is better tripod manfrotto 535 or beneo a373t for manfrotto 500 video head?
The Manfrotto is taller, sturdier and lighter, but much more expensive. I have recommended tripods in the fluid head section of my gear links. www.hudsonhenry.com/atslinks That Manfrotto didn't make the list, but you should check out the others, particularly the Robus.
Hudson, can you elaborate on why you prefer the LB-75S leveling base over the YB-75LP Half Ball adapter?
It's so much nicer. Your hands are both on the head and close together as you level making the balance much easier and quick instead of reaching under with one hand while moving the head with the other up above. Not having the handle beneath lets you get right on the ground flat, it's a breeze to pop off the systematic legs with the head for travel, but has a lockpin groove to protect from accidental drops without sacrificing range of motion. It's also smaller off the legs without that handle beneath. Finally, the three set screws to lock and unlock the head to the leveler are exposed and easy to access without taking the half ball apart to reach from below. It's a far superior design in every way possible to my mind. Innovative.
@@HudsonHenryPhoto Many thanks for your timely reply!! I can order my tripod and leveling base now. Thanks for your educational videos, too!
Hey, you could not be more correct but you forgot to mention that it makes shooting event photography in low light conditions far easier. Whether the action is on the stage or in the audience, you can easily turn and frame your subject(s) and get the shot. I've always had all the problems you described when using a ball head. Luckily, I lost my monopod. During my research for a replacement, I ran into a monopod for video shooting that came with a fluid head. By reading the description of how the fluid head works, I knew this was the best way to get a free monopod. I photographed an event at a huge church where I could not use flash nor I could get close to the stage because the event was being filmed. So, from the back of the church, with a 70-200 and a 2x converter, I made amazing shots including close-ups of all member on the stage and awesome candid comments. No way I could have gotten the number of great shots with anything else than a fluid head.
Good point!