CLUTCH ADJUSTMENT | GEAR SHIFT PROBLEM | REVERSE GEAR PROBLEM | BALENO

Поділитися
Вставка
  • Опубліковано 4 жов 2024

КОМЕНТАРІ • 269

  • @mr.mp07
    @mr.mp07 5 років тому +9

    Thanks bro its really helpful, service center wale ne bola tha clutch plate change hogi or 5000/- ka kharcha bataya meri baleno me..
    And i saw ur video and really wanna say thank you so much to u..
    Problem resolved after doing this

    • @ShubhamHere
      @ShubhamHere  5 років тому

      Always welcome brother.... : )

  • @ssreich
    @ssreich 6 років тому +2

    Thank you Shubham. I had faced this issue on my Maruti Swift for close to a year. Each time the Maruti Service Center used to say the gears need to be replaced and ran up a hefty amount. I came across you video and tried it. And the issue is resolved. Thank you for sharing this.

  • @shivashankar8278
    @shivashankar8278 5 років тому +1

    Demonstration is how the practical demonstration should be.Quick and exact.Very good video.Thanks.

  • @elferns
    @elferns 3 роки тому

    I got a new clutch job done from a local mechanic, did highway driving for almost 350 km including ghats, but the gears were hard in engaging, specially while down gearing and while engaging first gear, I thought it must be gear oil, but after coming home I got in touch with the mech, and he adjusted the clutch play, now gears are okay, I hope it's not the gear bushes.
    After seeing your video I can get this done the next time.
    Thanks

  • @eshk6236
    @eshk6236 5 років тому +8

    One thing I need to say to viewers ... regarding this adjust please be careful with your hands!1) When engine is hot it may burn your hands proceed with caution and safety 2) with radiator fan it may scratch your hands.... Btw Shubham bhai does awesome video content keep going bhai ✋👍

  • @tejask4889
    @tejask4889 3 роки тому

    I purchased baleno yesterday and I am facing this issue, first gear is very hard and doesn’t engage sometimes, I will give this a try today, thank you.

  • @vijaym1677
    @vijaym1677 5 років тому +1

    yes. sometimes I felt it difficult to shift to reverse gear. now I know what to do. thanks. nice video.

  • @HarshVLOGS
    @HarshVLOGS 6 років тому +6

    Nice Bro, Kai Logo Ko Problem Ati Hai Reverse Kartey Time . May Be Ab Problem na aaye .. Good Work :)

    • @ShubhamHere
      @ShubhamHere  6 років тому +1

      Thanks bro for your valueable comment

  • @MubinKhanLodhi
    @MubinKhanLodhi 5 років тому +1

    Thank you Shubham! I will surely give this a try, I have a Kia Sportage 2.0 CRDi 4WD, I really hope it's at the same location as yours and it's easy to find, like at beginning you have issues of putting it in 1st gear, I have something similar when putting car in 1st, 2nd, 4th and reverse mostly ... 3rd and 5th seem fine ... I will surely give it a try ... Thanks once again

  • @um3955
    @um3955 4 роки тому +1

    Is this the clutch or the gearbox cable you adjusted?

  • @sahilbarak9308
    @sahilbarak9308 4 роки тому

    Bro thankyou so much mere me yhi problem thi reverse gear ki hi par meri beat he 2011 model usme kese hoga me.dusri video dekh luga koi problem.nhi he baki pta to lag hi gya thankyou bhai ji

    • @ShubhamHere
      @ShubhamHere  4 роки тому +1

      Always welcome

    • @sahilbarak9308
      @sahilbarak9308 4 роки тому

      @@ShubhamHere bro nhi mila hehe .. apko kuch idea ho to btana bhai chevrolet beat 2011 cng petrol model.he bhai usme kaha milega bhai clutch ka ye setting krnr vala.nozzel

  • @pudnuplanet3590
    @pudnuplanet3590 6 років тому +1

    Thanks sir ..I hv buy delta model and I m new learner..

    • @ShubhamHere
      @ShubhamHere  6 років тому

      So be careful... And all the best

  • @davindersingh-in7yq
    @davindersingh-in7yq 5 років тому +1

    Bhai hidrolic clutch kise adjust karte hain

  • @sidhere24
    @sidhere24 6 років тому

    Awesome bro...
    You always tell us something new and good about cars.. 👌👍

  • @kshitijsingh1988
    @kshitijsingh1988 2 роки тому

    Thanks Bhai muge to lag raha tha k Mera gear box hi gya

  • @sudhirsingh216
    @sudhirsingh216 3 роки тому

    Thanks Shubham really nice video. Please make one video related to battery issue in car and especially in emergency

  • @akshayindurkar
    @akshayindurkar 5 років тому

    Is this same for all cars. My Ford eccsoport has long play clutch since beginning but now after 14000 km I'm issue in my reverse gear it's gitters on many occasions. Should I try what you have explained?

  • @veeramuthu6148
    @veeramuthu6148 5 років тому +1

    Hi Bro.. I have same issue in Tata tiago petrol version. I have tried to tighten as you did. But still the gear shift problem is not solved. Mostly I'm facing 2nd to 3rd gear. Its getting little locked in neutral and going to 3rd gear.

    • @Al-rx1vs
      @Al-rx1vs 5 років тому

      I am facing same issue in vista petrol while 2 to 3 and 4 to 3

  • @erindersingh
    @erindersingh 5 років тому

    सर मेरी टाटा इंडिगो cs में चालू गाड़ी में 1st और 2nd गियर फस रहा है बड़ी मुश्किल से और क्लच को बहुत ज्यादा प्रेस करने पर यह गियर लग पा रहे है जबकि बन्द गाड़ी में ऐसी प्रॉब्लम नही आ रही। please बताए क्या प्रॉब्लम है

  • @gopalsarma7442
    @gopalsarma7442 5 років тому

    My maruti 800 does not move , it even not move on pushing even in neutral gear . Engine starts no problem with it .One thing it was not on run for last 2 months or so . Now can you tell me what may be the problem

  • @pranayrustagi
    @pranayrustagi 6 років тому +1

    Hey Bro, great going . Having problem in shifting reverse gear so first I put first gear and reverse gear so it happens so this problem can be solved by this method u told in the video

    • @pranayrustagi
      @pranayrustagi 6 років тому

      bro plz reply to question asked

    • @swap_neel
      @swap_neel 3 роки тому

      I hv same prblm u mention pranay..what to do?

  • @sawanrathaur8583
    @sawanrathaur8583 6 років тому

    Bhut informative h bhaii..lov it

  • @arunsabne5514
    @arunsabne5514 4 роки тому

    Thanks brother ।best technical information ।

  • @mohit0901
    @mohit0901 6 років тому

    Like toh banta hai Boss!! very well thought through video!

  • @skmehboobskful
    @skmehboobskful 2 роки тому

    Thanks. Makes perfect sense

  • @um3955
    @um3955 4 роки тому +2

    Hi there brother, I need your help, my car doesn't go into reverse on certain occasions as does lock into reverse and when I reverse I hear grind so I have to take it out of reverse and then put it back in and it eventually goes into gear, all gears feel notchy too, I've had the clutch changed and the centric slave cylinder too, I'm going to have my clutch master cylinder changed now as the mechanic says it's that as there's a little sqeak when I press the pedal and the pedal feels heavy after driving for an hour, do you think this will fix the issue. Or do you think it's a selector cable or gearbox issue.
    It would be much appreciated for your help, I'm in a proper dilemma here!

    • @um3955
      @um3955 4 роки тому

      Hi bro, are you able to help, if its hydraulic clutch what do I do, do I change the clutch master cylinder

  • @teleindia03
    @teleindia03 5 років тому

    Good
    But please tell us about adjustment of hydraulic clutch

  • @drifterpg
    @drifterpg 6 років тому

    From last 2 weeks same issue clutch Pedal become halfway in Baleno. Service people tight but and again slipped. Now changed the Cable but still play is more then required.

    • @ShubhamHere
      @ShubhamHere  6 років тому

      As I have done in video.... U do it yourself.... Then see the change

  • @sujanshahi811
    @sujanshahi811 5 років тому

    Sir clutch plate new rakha hai clutch atjust v kiya, fir v gear easy nahi jata ,kohi air upaye hai?

  • @xtremegenerationjack
    @xtremegenerationjack 4 роки тому

    What about hydraulic clutch? How do we do it?

  • @krishnagvss
    @krishnagvss 4 роки тому

    thank you very much you have enlightened us

  • @pravintalokar2534
    @pravintalokar2534 5 років тому

    I am so happy. Really work

  • @sudhirsharan1734
    @sudhirsharan1734 11 місяців тому

    If reverse gear application is noisy in baleno AGS what to do?

  • @drdeveshbathla9161
    @drdeveshbathla9161 3 роки тому

    Is it applicable to diesel models as well ?

  • @socialjustice4874
    @socialjustice4874 5 років тому

    Thanks for such very useful information,

  • @tusharmeshram3249
    @tusharmeshram3249 5 років тому

    Hello sir
    Mere pass xylo e4 car hai. But usme 3 and 5 gare dalne ke bad automatically return ata hai . Uska koi solution bataye...

  • @mayanksehgal1201
    @mayanksehgal1201 3 роки тому +1

    Very knowledgeable

  • @Al-rx1vs
    @Al-rx1vs 5 років тому

    I have indica vista petrol 27000km done while changing gear only from 2nd to 3rd and 4th to 3rd noise coming like clutch pedal not press kindly advise

  • @upendraparekh9009
    @upendraparekh9009 6 років тому

    Achchi jankari diya hai thank you so much Friend

  • @titanium_pooh1891
    @titanium_pooh1891 3 роки тому

    Sir Tata indic clutch cable change kaise kare uspe video banyee pls

  • @paviayodhya2010
    @paviayodhya2010 6 років тому +1

    Helo bhai ...In my new Dzire 2017 vdi having same problem as u Shown in the beginning of this video..dzire VDi will have the same solution? Kindly advice...I am so sad because it's my new car..Is it a major issue? My car is just 11500 km only

    • @ShubhamHere
      @ShubhamHere  6 років тому +1

      Yes it could be the same issue... Just tight the screw.. As shown in the video... If it doest not help then tell it to the service people

  • @pramodkathe4231
    @pramodkathe4231 3 роки тому

    Sir santro xing ka clutch kaise set kare

  • @sachinjane1983
    @sachinjane1983 4 роки тому

    Sir ertiga clutch wired hota hai ya hydrolic.plesae tell

  • @arungaikwad848
    @arungaikwad848 3 роки тому

    Thanks but in diesel car who to adjust

  • @vikramshirsat84
    @vikramshirsat84 6 років тому

    shubham bhai nice video... please make video about new amaze manual petrol reverse gear vibration problem. such main problem hai ya accellation ka koi issue hai ?

  • @spsingh5824
    @spsingh5824 3 роки тому

    mri fiat linea h usme hydrolic cluch hai lkn back gear bht problm aa rhe

  • @tahirhussain2542
    @tahirhussain2542 4 роки тому

    Santro car me bi aesy hi hota hy?

  • @paochatuboii2517
    @paochatuboii2517 4 роки тому

    Sir mera super ace ka gear 5 kebat 4 nahi lagta or jam hoja ta hai us ke bat bari muskil se revarse gear lak ne kabat fir 1 .2.3.4 lak jata hai keise adjust karung sir pliz help me🙏🙏🙏

  • @ancientmedicos5709
    @ancientmedicos5709 5 років тому

    Sir humare duster 85 , 50 k chl gyi h third gear me asa hi hota h .Reverse me kabhi kabhi awaz ati h aur back nhi hoti bad me vapas lagane se theek ho jata h.clutch bleeding karane chahiye ya gearbox ka issue h

    • @ShubhamHere
      @ShubhamHere  5 років тому

      Thoda sa clutch adjust kar k dekhiye.....agar theek hua to sahi hai nahi to clutch plates change karwaaiye....gear box ka issue nahi hai.
      Aur reverse gear me aisa hota hai....kabhi kabhi awaz aati hai par lagta nahi hai.....to reverse lagane k bad thoda sa check kiya kariye ki lag gaya k nahi ...halka sa clutch release kar k

  • @kashumi2620
    @kashumi2620 5 років тому

    Baleno rs ma kaha pe tight karna ha ... jaha regular baleno ka ha waha rs pe nahi h

  • @jaynisonmaisnam7465
    @jaynisonmaisnam7465 5 років тому

    Verna fluidic diesel cluth problem hotahae some time it works how to solve or while driving the car when i press the cluth run thorasa

  • @bharatbhushan8977
    @bharatbhushan8977 5 років тому

    Is car mein hydraulic clutch wire hai?

  • @kalpeshpatel4504
    @kalpeshpatel4504 4 роки тому

    How to adjust hydraulic clutch pedal play ????

  • @adityaSharma-mx9vx
    @adityaSharma-mx9vx 3 роки тому

    Bro Swift dzire diesel me bi hoti h kya asi adjustment hai mere sath bi yahi problem hai?

  • @shanthshanth2007
    @shanthshanth2007 3 роки тому

    Super explanation nice brother

  • @preet221000
    @preet221000 4 роки тому

    Bhai Punto me kese Karu ye problem solve btao

  • @ravisabavath8582
    @ravisabavath8582 4 роки тому

    Hi bro i have baleno in that 2nd gear was not shifting services centre guys asking 18000 what i have do plz tell me something

  • @maheenabu4084
    @maheenabu4084 3 роки тому

    Bro engine vibration in new alto pls do one vedio

  • @ismajami
    @ismajami 2 роки тому

    Ur showing witch car??car name??..all model car this problems solving??reves gear problem.

    • @ShubhamHere
      @ShubhamHere  2 роки тому

      Car name is there in the title ... It's maruti Suzuki Baleno ... It is for all normal wired clutch....not for hydraulic clutch

  • @suniljain1869
    @suniljain1869 4 роки тому

    Sir left side car jujment par video bana sakate kay

    • @ShubhamHere
      @ShubhamHere  4 роки тому

      Bilkul sir ....bas abhi kuch din rukiye

  • @AshokKumar-py3gm
    @AshokKumar-py3gm 6 років тому

    Thanks for this informative video sir

  • @ndumndum1000
    @ndumndum1000 4 роки тому

    WHAT CAR IS THIS ?

  • @gaurav954
    @gaurav954 5 років тому

    Very helpful. Thanks and keep it up

  • @hemalatha3401
    @hemalatha3401 3 роки тому

    Hi one doubt my baleno has problem now. It stucked. The problem is, the car can front move but can't go reverse I think gear lock, some sounds came when my sister try to reverese the car.
    Is it major pblm? Pls tell me

    • @ShubhamHere
      @ShubhamHere  3 роки тому

      Could b a clutch problem ...might be in clutch assembly or clutch play might have increased
      Get it checked before it turns to major problem

    • @hemalatha3401
      @hemalatha3401 3 роки тому

      @@ShubhamHere ok sir tq

  • @rammacaliphate
    @rammacaliphate 3 роки тому

    Thanks, same problem happened to me

  • @sujanshahi811
    @sujanshahi811 5 років тому

    Alto 800 ka second gear fackta hai bajha kye joga sir

  • @Jagruknagrik-2024
    @Jagruknagrik-2024 2 роки тому

    Hydraulic clutch me kaise karte h.?

  • @jusk7715
    @jusk7715 4 роки тому +1

    I took my vehicle through waterlog and now the . Next day I started my car but was unable to change any gears. When car is in off mode I was able to change gear but not in on mode. What to do.

    • @jusk7715
      @jusk7715 4 роки тому

      If u are available online please suggest a solution before I call some towing perso

    • @ShubhamHere
      @ShubhamHere  4 роки тому

      Does your car clutch play is ok...around 1 cm... if More than that then adjust aa shown in video....of nothing happens ....this could be a major problem

    • @jusk7715
      @jusk7715 4 роки тому +1

      @@ShubhamHere yes it was fine ..then i switched off my vehicle , put it on first gear and then power on the car ..it struggled a bit then but moved ...then I switched the gear to reverse mode and now it is not coming out of reverse mode to may other mode..it's just stuck.

    • @dipankarsarma4878
      @dipankarsarma4878 2 роки тому

      @@ShubhamHere I am facing same problem. Same situation.. Please advise.

    • @dipankarsarma4878
      @dipankarsarma4878 2 роки тому

      @@ShubhamHere Just I checked my car Maruti Swift Desire.. I found i can move Gear without starting the car.. But it hard... But after starting the car I am unable to shift gear to 1/2/3/4/5..when i try to shift to Reverse, Noise sound comes.. I checked Clutch, its goes to much down when i pressed... I thought to tight the node (screw) as per your video... But I am unable to find the node.. Please help me to find the screw to make tight.

  • @sakthimoorthy0309
    @sakthimoorthy0309 4 роки тому

    Is it for hydraulic clutch ??

  • @SR-sn9up
    @SR-sn9up 4 роки тому

    it's helpful. Keep it up.

  • @rajeev737rath3
    @rajeev737rath3 6 років тому

    Nice video brother
    Bhai zeta aur alfa k headlight k bare me video bnao plz
    Night me video bnao jisse dono model k headlight ka throw pta chale

  • @searider8550
    @searider8550 5 років тому

    Suzuki ALTO m kis side p hta ha y, meri car ka reverse gear bht mushkil say lugta ha...

    • @ShubhamHere
      @ShubhamHere  5 років тому

      Kisi se bole clutch ko baar bar dabaaye....aur aap hood k ander dekhiye kaha pe movement ho rahi

  • @mrhilalahmad9544
    @mrhilalahmad9544 3 роки тому

    I have ford fiesta classic ..its possible in that car ..

    • @ShubhamHere
      @ShubhamHere  3 роки тому

      If it's not a hydraulic clutch

  • @rakenderdhayal3254
    @rakenderdhayal3254 4 роки тому

    Swift dizire vdi me clutch wire type hota h ya hydraulic?

  • @kushalgandhi3520
    @kushalgandhi3520 4 роки тому

    Baleno gets jerk when shifting to 2nd gear from 1st gear. There is no play in clutch. Is there any solution?

  • @malikmajidabbas7885
    @malikmajidabbas7885 6 років тому +1

    Nice Bhai jee

  • @avinashbopche6339
    @avinashbopche6339 3 роки тому

    Sir. mere tata ace gadi ke barbar ger fas jate hai

  • @arnab89sen
    @arnab89sen 5 років тому

    Many Many thanks bhai

  • @gajendersingh5276
    @gajendersingh5276 6 років тому

    Baleno petrol ki average kya hai city main
    And baleno main koi minus point
    Jaise kahte hai ki iski body bahut light hai
    Ezeely dent pad jata . Paint quality achi nahi hai .
    Aisa kuch aapko lag ho to please bataye

    • @ShubhamHere
      @ShubhamHere  6 років тому

      In city u will get around 15 to 17 with Ac... And it easily get dents... Paint quality is good

    • @gajendersingh5276
      @gajendersingh5276 6 років тому

      Main alpha CVT soch raha tha lene ke liye CVT kaisa rahega

    • @ShubhamHere
      @ShubhamHere  6 років тому

      In city it's good.. But it is not punchy... U will not feel power.... U also have other options in this price segment.... Coz baleno cvt is not fun to drive.. Coz it is laggy

    • @gajendersingh5276
      @gajendersingh5276 6 років тому

      Ok sir fir kya best rahega amt main
      Mujhe automatic leni hai petrol main aap suggest kare konsi car best hai

  • @pravinpatil7826
    @pravinpatil7826 4 роки тому

    Hello, How I can adjust Hyundai i10 grand diesel hydraulic clutch? i10 grand 2015 model ka hydraulic clutch adjust kaise kare?

    • @ShubhamHere
      @ShubhamHere  4 роки тому

      Check on UA-cam.... HOW TO ADJUST HYDRAULIC CLUTCH ON CAR

  • @abedits4014
    @abedits4014 3 роки тому

    very good video

  • @Johny23041989
    @Johny23041989 6 років тому

    very nice bro. keep up the good work

  • @RDavengerr
    @RDavengerr 6 років тому

    new honda amaze mea reverse gear mea problem hai of vibration
    it is serious problem ???
    i haven't received my amaze yet ,what should i do to check the vibration of reverse gear in my new amaze
    plz tel

    • @ShubhamHere
      @ShubhamHere  6 років тому

      Yes it's a problem.... Get test drive if u planning to buy

  • @mohitmeena2381
    @mohitmeena2381 6 років тому

    thank Bhai my swift same problem

  • @amritpattanaik203
    @amritpattanaik203 5 років тому

    I have i20 elite model, i got a problem of gear shifting. The lever is only working for 3,4&5th gear. No reverse, no 1st & 2nd.
    All free rotation!
    Can u help me how to!

    • @ShubhamHere
      @ShubhamHere  5 років тому

      Try how i adjusted the clutch ....

  • @HarpreetSingh-rt1hn
    @HarpreetSingh-rt1hn 4 роки тому

    Sir mere ko 1st gear m problem aa rhi h brezza h service center wale bol rhe h gear box kholna padega 28000 chal gyi h pls reply jrur karna

    • @ShubhamHere
      @ShubhamHere  4 роки тому

      Itni jaldi gear box nahi khola jata....ap 1 bar clutch adjust karwaao

    • @HarpreetSingh-rt1hn
      @HarpreetSingh-rt1hn 4 роки тому

      Brezza m kha h clutch set karne wala bolt pls btaye

  • @TheAnmolekka
    @TheAnmolekka 6 років тому

    Had same issue. Thank you.

  • @machismosandy
    @machismosandy 4 роки тому

    Bhae meri gadi to 200 ke baad hi aisa kar rahi hai 2 baar service center ko bol chuka hu adjust kartey hai but issue resolve ni ho raha aur 1st gear chodney pe gadi vibrate bhi karti hai with brand new car

  • @ashishkumarkar3545
    @ashishkumarkar3545 4 роки тому

    Dzire VXI me clutch cable Ka he ya hydraulic

  • @mooncow1412
    @mooncow1412 5 років тому

    Bhai... Mere pas b baleno hai lekin jb main Reverse gear lgata hu toh bhut br easily nhi lgta, jaise hi clutch release krta hu toh gear box se grrrrrrr ki awaz aati hai phir dubara joor lgake gear lgana pdta hai. Kya ye gear box ki problem hai? Ya normal hai?
    1 se 5 gear ek dum sahi lgte hai. Bs Reverse gear mein problem aa rhi hai.
    Thanks

    • @mooncow1412
      @mooncow1412 5 років тому

      Solution toh btao bhai agar koi idea ho toh?

    • @ShubhamHere
      @ShubhamHere  5 років тому

      Pura msg padhiye......
      Koi b car me reverse gera thoda problem karta he hai..... Agar reverse nahi lag raha hai to wapse se first pe laga k usko reverse kariye
      Qki kabhi kabhi....transmission k teeth gear k teeth se match nahi kar paate hai
      Ye koi major problem nahi hai

    • @mooncow1412
      @mooncow1412 5 років тому +1

      @@ShubhamHere okay bhai, thanks

    • @maneeshchandra3502
      @maneeshchandra3502 4 роки тому

      Mine everytime making sound

  • @kpkdgnapati7719
    @kpkdgnapati7719 2 роки тому

    Bhai mre tuv 300 t8 me running gadi me gair nhi lag raha hai pr gadi bnd kr diya tho gair lagta hai kya ap k bhi car me ayasa hota tha kya

    • @ShubhamHere
      @ShubhamHere  2 роки тому

      Clutch adjust kar lijiye... Play zada ho gaya hoga

    • @kpkdgnapati7719
      @kpkdgnapati7719 2 роки тому

      @@ShubhamHere gadi chek kiye play tho nhi tha kuch bhi pr aap ne jysa dikhaya ki flywheel me maar lga hai same vaisa he lga tha cluch plate or presure plate acchi hai or jo putti ghas gai thi use maine cut kr diya tb bhi aavaj bnd nhi huaa muze kya flywheel change krna honga kya

  • @odiarosei210
    @odiarosei210 6 років тому

    Thnks Broo for the advice .....caz I also own a baleno alpha......

    • @ShubhamHere
      @ShubhamHere  6 років тому

      WELCOME DEAR... CONGRATULATIONS

  • @vishalpatil930
    @vishalpatil930 4 роки тому

    Hi
    Bhai
    Me i20 2009 disel use kr raha hu...
    Kuch din pehale lower cylender leak hua tha to mene 2 cylender change kr diye hai par ab gadi kuch km chalneke bad gear bahut hard girte hai...plz rply me

    • @ShubhamHere
      @ShubhamHere  4 роки тому

      Company me poochaa aapne.?

    • @vishalpatil930
      @vishalpatil930 4 роки тому

      @@ShubhamHere nahi bhai thanks rply dene ke..
      Ho gaya mecanic ne seting kr di kuch....

    • @ShubhamHere
      @ShubhamHere  4 роки тому

      @@vishalpatil930 pooch Lia karo detail me problem k bare...AISA Q HUA ....KAISE THEEK KIYA...

  • @avinash_aky
    @avinash_aky 6 років тому

    Hello! Bro Please tell me what is the function of Baleno (Alpha Model) taillight function and what's it use? (which is in bottom portion of taillight in white clear glass)

    • @ShubhamHere
      @ShubhamHere  6 років тому

      Actually... I also don't know.... And I have tried every possible way to determine it.... But failed

    • @avinash_aky
      @avinash_aky 6 років тому

      Shubham Here Is it a fog light function

    • @ShubhamHere
      @ShubhamHere  6 років тому

      Ye it should be a fog light.... But it does not activate... And there is no switch to activate it

  • @stephenransley9377
    @stephenransley9377 2 роки тому

    is this for a suzki wagon r

  • @ashishbamotra2582
    @ashishbamotra2582 5 років тому

    Bai clutch palte dalne ke baad bi agher gear adke

  • @colors00100
    @colors00100 6 років тому

    Hi bro, am planning to buy Baleno zeta model.. is there any problem with its Apollo tyres that comes with company fitted alloy

    • @ShubhamHere
      @ShubhamHere  6 років тому

      No brother.... Tires are good... Good grip

    • @colors00100
      @colors00100 6 років тому

      Shubham Here thanks for the reply... Need one more suggestion from u.. on spare wheels.. as am buying zeta model I get normal spare wheel.. do u recommend to replace it with alloy wheel ..? Dose that wheel affect ..if I use it as it's 15 inch wheel for more than 80kms as mentioned by nexa

    • @ShubhamHere
      @ShubhamHere  6 років тому

      Steel wheel gets easily bend while going thorough bad patches with speed... If u want u can change it with alloy.... But it is just spare wheel not be used too much only for Couple of distance .... So if necessary then change it else remain the same.

    • @colors00100
      @colors00100 6 років тому

      Shubham Here thank you.. I liked your seat covers. Could you please share it to my email : adarsh87pr@gmail.com

  • @vineesh0101vc
    @vineesh0101vc 6 років тому

    Useful video.... Great thumbs-up

  • @tojvarkey1552
    @tojvarkey1552 4 роки тому

    I have the problem with my i10 shivering while tranafer to reverse mode only. Any idea?

    • @ShubhamHere
      @ShubhamHere  4 роки тому

      When you reverse your car ....then it vibrates?

    • @tojvarkey1552
      @tojvarkey1552 4 роки тому

      @@ShubhamHere only shivering while transfer from park to reverse or neutral to reverse. Once transfer then no issue. Driving smoothly. If any idea please share your contact number.

  • @Your_DIY_Maniac
    @Your_DIY_Maniac 4 роки тому

    Hi Shubham, Where do I find the screw in the skoda laura ?

    • @ShubhamHere
      @ShubhamHere  4 роки тому

      Laura has normal clutch or hydraulic clutch?

    • @Your_DIY_Maniac
      @Your_DIY_Maniac 4 роки тому

      @@ShubhamHere its hydraulic...with master cylinder and slave cylinder