HM1317C Diagnose the problem/ disassemble & Assemble
Вставка
- Опубліковано 26 вер 2024
- Good day
in this vedio I demonstrate how to Diagnose and Disassemble & Assemble Makita Demolition Hammer model HM1317C watch for your information
thanks
God Bless - Наука та технологія
Is this model need oil change for several time of operation? Tx for the video
Yes. And also need to change o rings
@@powertoolsclinic thankyoi for kind respond, but it has no oil indicator or oil inlet or outlet. Also no oil change procedure written in manual book, i try to find vidio about it, but still didnot found one yet
Nice work ! So i watched the entire video. I don't what i missed. What actually kept the tool from operating? I have 3 of these down at my shop and Im sure I checked everything. Ive checked and replaced switches, new brushes, new electic motor, ive changed a control board and still nothing. I have the green light but the tool will not operate. Any insight would be appreciated.
Try to replace o rings & x ring check to your local makita distributor or dealer in your country
@powertoolsclinic Thankyou !
En donde puedo conseguir piezas del rotomartillo?
Hi user-ev1yk8qs9f please contact your local Makita distributor or dealer in your country
With thanks
Welcome! How to measure stationary and rotating parts? I'm sure the engine is faulty, but I don't know which part!
What problems with your machine?
@@powertoolsclinic This is a Makita HM1307C Demolition Hammer! The problem is that it won't start! The green LED on the controller lights up, but the engine does not start! I replaced the controller, but the controller is not the fault!! I connected 12V to the brushes and the engine started! I measured the stator with an ohmmeter, without a brush holder! There is resistance between only 2 outputs, nothing can be measured between the others! Maybe one of the coils is broken?
Check the carbon brush if the carbon brush is short Replace it with the new one for the good of your machine Replace all O rings and Hammer grease inside the machine but if you don't know how to Disassemble contact your local Makita distributor or dealer in your country thanks
@@powertoolsclinic I solved the problem! There are two coils in the stator, one is broken! Thank you for your reply!
Carbon Brush is short or worn-out
Welches Reparatur Satz
Schlagsystem gibt es dafür
Yes. Hammer service kit you can check in you local makita dealer in you country
Makita or Dewalt? which is most powerful?
For me makita not only powerful but availability of genuine spare parts
助かりました
Please translate to English.
@uaser-kk4kw6hu1t thanks,
your annoying red bell over and over again earned you a dislike. congrats.