I am going to use ZCU-12 control unit , it’s not having DI7 pin. Can u tell me to try out locally from HMI which two terminal to loop for ZCU-12 as explained in vedio??
I have a small problem with my ACS 850 , when i started my pumps by 50 hz consigne, the driver never get 50 hz , it work under 44 hz , i need your help brother , thank you
Problem : The motor configuration parameters are set incorrectly. Solution - Check the settings of the motor configuration parameters in group 99. The drive is not dimensioned correctly. Check that the drive is sized correctly for the motor
I am going to use ZCU-12 control unit , it’s not having DI7 pin.
Can u tell me to try out locally from HMI which two terminal to loop for ZCU-12 as explained in vedio??
I have a small problem with my ACS 850 , when i started my pumps by 50 hz consigne, the driver never get 50 hz , it work under 44 hz , i need your help brother , thank you
If starting from Remote, check the Isolator and check the reference current at Analog input - it must be 20mA
Sir motor auto tuning video banao ..
already available hai channel pe, pl check
@@bishantkumar12589 send to video link sir ji
@@thakur3980 ua-cam.com/video/2Hcb2sHG-vY/v-deo.html
@@thakur3980 ua-cam.com/video/l-0OxUaJw_o/v-deo.html
@@thakur3980 please check both, both are useful
How you identify interlock point..
I mean where the interlock point ka mention. In manual or some other source.
Pls reply
Sir. I didn't got your point !!!
Interlock with respect to ?
Dear sir ,drive me flying mode kya hota hai ,.kitne tim tk flying mode hota hi
Power card and communication card kis liye use hota hai sir?
Power card - power supply and firing ckt in one board
Communication card - adaptor like FPBA
@@bishantkumar12589 ok sir
obp jsw hai kya
Kya baat hai dost ? Bataoo how can I help you
Motor nom alarm 2041 error how to solve???😢😮
Problem : The motor configuration
parameters are set incorrectly.
Solution - Check the settings of the motor
configuration parameters in group 99.
The drive is not dimensioned
correctly.
Check that the drive is sized correctly for
the motor
Means. Motor nameplate data is not matching with drive parameter data in parameter 99 - voltage, rpm, current, kW etc
Parameter setting?
Check the Playlist ABB
frequency is not taking what was the problem
Can we connect any small motor for testing ?
Yes. Put the drive in scalar mode
@@bishantkumar12589 thanks