How to remove BMW X5 Rear Door Panel
Вставка
- Опубліковано 30 вер 2024
- Enter Promo Code: YT10 at our website www.bimmermerch...
10% Discount on all purchases
This DIY video will show you how to remove rear door panel from a 01 BMW X5, step by step to ensure end result is good. Enjoy.
Subscribe to our channel for more DIY videos.
Check us out for used BMW oem parts !
Website: www.bimmermerchant.com
Facebook.com/bimmermerchant
Instagram: @Bimmermerchant - Авто та транспорт
No I have not. I have the panel loose but there is a shade that seems to be causing the panel to stay on the door.
Do NOT pull the top of the panel outwards as shown. Those upper clips are supposed to stay on the panel. You did this the hard way. Remove the plastic vertical window shade housing above the panel. There is one screw under the shade holding the panel down. Then LIFT the panel up off the frame like you would in any other car.
Good point. I did correct that removal technique later on the video and informed viewers to pull parallel towards them. Thanks for pointing that issue out though.
How do you remove the door panel with the shades option
The X5 that I'm working on had the rear window shades. Does the shades have to be removed before the panel can come off?
And presto...it's off, typical UA-cam
This car is the worst POS garbage of a car I’ve ever seen. EVERYTHING will break. It’s so ridiculously terribly made
What are you driving now?
Yo man, your information is wrong. 3:53, you should have said to do that after you remove the interior. That thing on my car is now broken.
Fairly accurate, but dud you are WRONG on the rear 1/4 window sunshade removal. The clip holding the top of that sunshade is facing DOWN!!! Fish a very small screwdriver behind the 1/4 window sunshade and move it carefully UP!!! Please correct your post
Hi- Not quite sure what you're referring to, this video talks about the removal of a door panel not sunshade removal.
Awesome! I'm an experienced technician with over 15 years. But always good to see how specific components come apart rather than breaking them! Thanks for posting! I'll subscribe and look for more...
Great video! Thanks it's very helpful since I'm trying to replace and up grade all the door speakers on my X5.
I appreciate these videos but damn some of them take forever to get to the point of actually getting the job done.
Thanks for your support
Ale pomocny byles ze ho ho
Nice. Gotta love those X5 models.
Please help! I have the door panel off but closed the door. How do I unlatch it - the outside door handle doesn’t open now.
Also not an issue but the glue failed on the top of the door card so the black top piece of the door separated from the door skin.
Note that there is an additional connection in the middle of the door. After separating the door card from it’s edge-pins reach in & pinch the metal A going into a plastic connector.
Note the back of the grab-handle connector snagged the inner door handle clip & shattered it…be careful that it is out of the way even when it is detached…looked like the connector had been glued together before.
The privacy shade is in the way. I cant lift the panel up with this in the way! Your X5 example doesn't have this part. I don't know how to remove the privacy shade!
My back door window came off track I can see the part going up n down but the window stays down trying to fix it cause my window won't come up
Same
Thank you for taking the time to post
Hope you figured out that the panel has to be removed first and then shade can be removed by removing phillp screws i beleive. Hope all turned out well.
Im now working my 2004 BMW X5 Rear door panel. however your video shows how to remove the rear panel for a 2001 BMW X5. Correct me if Im wrong but I have notice that the 2001 X5 BMW's don't have a screen that the 2004 X5 BMW Have in the rear doors that we can pull up when windows are down. do you know how to remove it?
t
thank you for making this video, now I have a much better idea of how to pull the left rear door panel off my wife's 2001 X5
I'm sorry, I just read a question by RSpi007 with that same question and read your answer to it, I'll try it. thank you.
The red plastic tool is often called door panel remover, the other tool that looks like a screw driver with two hooks at the end, I call husky and can be found in most home depot stores. Hope that helps
Well I learned from this video that I had been attaching my bowden cable wrong and is prob why I can't get it to stay on the back of the inner handle. Only video I could find that shows how that thing attaches up close. I had been trying to feed it in all weird and it just slides right in and then clips. Now I gotta try again and see if it was me or the handle thats messed up before I go and pay for a new inner handle. Already bought a new bowden cable but don't think it was even broken, maybe it just popped off the back of that interior handle. (carrier already replaced last weekend)
where can i get those tools?
got it!
for now I'll be using a medical plastic bite stick. will see how it works.
what do you mean 'power cable'?
Excellent video. Well done. Well spoken
thanks!
Thanks for watching
What is the tool called that you used to remove the pins?
thanks this video was very helpful to remove the rear door panel. my window stopped working, and I need to find out why! if I need more help to work on it I will write back for some help. thank you very much.
How remove. Door handle 2008 BMW 528 I tanks
how do I remove window pull back shade
Thanks...it help me a lot...n save me money...lol
enjoyed the video, but wish you showed yourself actually doing the steps instead of cutting the video. we like to see if you had struggles as we would likely go thru the same thing
Thanks for watching our video. I would love to show every, however, due to time constraints, im only able to show the important steps.
where can I buy that plastic tool?
I have a little tiny light bulb that comes off the wiring loom. The wires are black in color. It has a special attachment looking clip tha tis also black but I can't figure out where it is suppose to go. I see nowhere that it can insert into.
might be hour inner handle bulb.
Mines is stuck on something I did everything you did
what is stuck? handle or actuator?
Hi, can you send me the links where i can buy those tools. Thanks in advance
What specific tools are you referring to
can I replace the rear door carrier with the driver one? are they the same?
Nope, they are different. Be sure to check out our website for all your pre-owned bmw parts: www.bimmermerchant.com
Great Vid however should be noted this door is a base model X5 mine is the same year but has the side airbags and privacy screen that need to be removed and there's additional steps dealing with the airbags on either door.
Thats an awesome point that you made. We recently got an X5 with rear shades and airbag and will post a DIY for that specific door. Thanks for the heads up.
When I just did my handle carrier, I didn't even unplug mine. I unbolted it but left it plugged in and then hung it from the top of the window with a bungee cord. No codes thrown, and didn't have to disconnect the battery. If you don't disconnect the battery, but unplug the airbag, I was told you have to pay around a $100 to have the dealer clear the code...This was something that held me up for a while as I was worried about having to do all that (it's not like the battery is easy to get to, especially b/c I have the pull out load floor)
There is a pin that I couldn remove,
What pin was that?
Thanks bro, this really helped
Glad video helped out. Be sure to check out our website for all your bmw parts: www.bimmermerchant.com
Excellent video, really well explained, thank you. I can now remove the panel and see why my passenger door speaker works fine for weeks or months and then suddenly stops for weeks at a time!