I love your videos! One thing I’ve figured out is if you just have the one sunflower on your canvas and then hit “make it” you can adjust the “project copies” (top left corner of the screen) on your make it screen and adjust up to 10 if that’s how many you want. Keeps from having to hit duplicate 10 times 😊
That was so helpful! Having bleed on makes sense. It looks the best without the white outline. Love your videos! Would love to see a full sanding video.. with your techniques for a smooth cup 😍💕
Thank you for being classy and professional in your videos. I really dislike tutorials when they are wearing a low cut tank top. I find it distracting and unnecessary. You are a breath of fresh air and I enjoy watching your videos and refer to often for help. May you always bring the best tutorials on youtube!
I’ve been hearing about Quick Coat lately - thinking I might have to try it. I had some vinyl letters lift last week and it seems this might help. Good tip.
Great work as always 💕 but what is your most favorite machine that u primarily use for your crafts....cricut explore, explore air?? Which one is BETTER lol
thanks! you don't need to connect your printer to your cricut. your cricut software will tell your printer print the image, then you'll place that printed sheet of images on a cutting mat and run it through the cricut. so that's basically what this whole tutorial is about
Hello! I m new at this. I want to do the print and cut with printable vinyl. Am I able to use my Epson inkjet printer? It is not a sublimation printer and it has not been converted into one. Thank you for any help and advice given 🙂
Hi lovely lady 🥰 thanks so much for your simple and professional tutorials! Can I ask, I notice you like to sand your cup after epoxy to smooth it out for decals and final coat of epoxy, but I haven’t yet seen a video on how you tidy up the inside top edge of your cup? How do you avoid mess on the inside rim, and when you get mess, how do you fix?
great video, i'm looking to use printable vinyl on a motorcycle helmet, i know I will most likely need to seal the vinyl so that if it gets wet the colors won't run, do you have any recommendations
Thank you so much Jessica for this demo. Super cute cup!! I have a maker. My print and cut even after calibration never lines up. Any suggestions other than me throwing it in the trash lol.
I know this is from awhile ago and hopefully you figured it out by now but if not have you made sure you have no direct light over your Cricut? If there is, the light can mess with the laser and calibration making for messy cuts that end up in the garbage :(
Different tumbler brands have slightly different measurements. You can see if the supplier you purchase from can give you their exact measurements or you can get it with a tape measure
Here’s a newer video that might help - HOW TO PRINT THEN CUT WITH PRINTABLE VINYL AND CRICUT ua-cam.com/video/KskYcqpWvGw/v-deo.html we used the Cricut print and cut feature. So design space will send the image to your printer to print, then you place the printed material on your cutting mat and put that through your machine.
I am trying to understand the difference between when you are epoxy and when you do a clear coat as you mentioned. I don’t know how else to ask that question
you don't have any of the products you used except for the vinyl, which quick coat did you use and where can it be purchased, other than that your video was good
My products are linked in the description box. Also, I did mention the name of the quick coat sealer from counter culture..which you can buy from counter culture 😊
I personally haven't used that so i can't speak on it. I'm not sure if it would yellow over time. For sealing, i use quick coat and have also used rustolem 2x clear gloss.
I used cricut printable vinyl and printed it with my printer, then cut it with my cricut so I could get an actual image, like a picture, instead of just a silhouette or outline. The green thing is the cutting mat that holds the paper in place while it cuts.
I'm not sure i understand your comment. My guess of "bleed off" is to let the inkndry before you cut or handle your printable vinyl so it doesn't smudge. Transfer tape on printable vinyl would peel off the ink when you remove it.
Great tutorial! I enjoyed watching the (previously) Live with Q&A making the leopard prints. Can I ask what kind of printer you're using? I saw in your previous video it's a Cannon, but is it inkjet or laserjet? It would have to be laserjet to stand up to the water based sealer, right?
@@FlynnSistersBoutique I have same printer. When I change settings to photo print it wants to use the little photo tray not the bottom feed. How did you change that?
I am using an HP OFFICE INKJET 8710 and my cricut printable vinyl came out wet and I am 14 hours later and it still is almost as wet as when it came out the printer. Do I have the wrong printer or could it be because I didn't select "photo' and 'matte' in the options for my printer? Please, help.. Thanks in advance!
Hey, first off I love your tumbler!! quick question about that printable vinyl. What kind of printer do you use? and do you have to seal it? I have seen where you have to put clear vinyl over it. I have bought SOOOO much printable vinyl and haven't in over a year used any of it. lol PLEASE HELP
Could you explain why you epoxy over the flowers before applying the decal? And what is the difference between the vinyl printed flowers and the decal?
My cricut doesn't seem to have the same settings you did when it became cutting time, I ended up printing my imagine on my printer in black and while, So frustration to print to cut.
My printable vinyl is coming out with lines and the colors are not super bright how can I fix this? Also I am new at this what would you recommend to seal the vinyl with? I am using small clear water bottles.
you don't need to seal the vinyl. you can epoxy over it. If your vinyl is coming out with lines, you need to make sure you've optimized your print settings for "photo printing" and high quality print options
Hi. Quick question. I bought the quick coat you suggested. I put some stickers on my tumbler that I had printed out. I let them dry for a day and a half. When I received the quick coat and I applied it like you did, my ink started spreading off my stickers. Any suggestions?
@@FlynnSistersBoutique I used DOTAC transparent premium vinyl sticker for inkjet and laser, and also GWYBKQ printable vinyl sticker paper For inkjet printer
Hi, when I put my quick coat the ink on vinyl starting running. So the entire image got mess up :-(. I printed the image on Cricut printable vinyl last night and put the quick coat today. Do I have to wait 48hrs before putting any coat or sealer? Thanks
Im having such a hard time with printable vinyl for a dark image. I usually do bright images but this time the customer wants this dark lots of black and its not coming out right the edges curl up.. its a disaster. Any tips?
Im new to this so maybe a dumb question but if you were to lay your decal right after laying the sunflowers and then epoxied both, would that work? instead of two separate coats?
I had decided to do a trial and error so I spray painted my cup, sealed it, used my vinyl and then placed the epoxy. I did have to strip it because I messed up when i mixed the epoxy. I realized afterward. i hope I don't have to strip a second time.
So glad you did this video it helps me with the details to put for the printing settings 💕. The tumbler is beautiful!!
thank you so much!
😍💖😍💖😍💖
Thank you for doing Cricut tutorials because they are rare to find!!!
Thank you for watching!!
Two of my favorite things leopard and sunflowers.🐆🌻 Absolutely adorable! Love the back drop by the way.
Thank you 😊
I love your videos! One thing I’ve figured out is if you just have the one sunflower on your canvas and then hit “make it” you can adjust the “project copies” (top left corner of the screen) on your make it screen and adjust up to 10 if that’s how many you want. Keeps from having to hit duplicate 10 times 😊
Great tip!
I purchased natural dried pressed flowers. They epoxy so nicely too
Love the cup the sunflowers are so cute with the leopard print ❤
Thank you 😊
I love the set up! Very refreshing and welcoming 🥰 great tip to set the print on bleed to avoid the white edges of the paper 🤗
Thank you 😊
I love it. So pretty. I am a little leopard and sunflower 🌻 addicted. Hugs Sheryl 💙🎨💙
Love the new back drop. Your makeup is on point and you look as gorgeous as this cup. Thank you for the video.
Thank you so much 😊
You seriously have a tutorial to answer all my questions!! Thank you for another great video! Can't wait to try this myself! 🥰
Thank you 😊
So much easier than I thought!
Yes it’s super simple!
You look stunning girl!!!! Yassss!!!! And this video is right on time. I hated every other tutorial I was praying you would do one!!!
Thank you so much 🥰
You are awesome! I hated watching UA-cam tutorials before you started your channel because of the rambling, bad lighting, etc. ❤️
Lol oh gosh... thank u so much 😊
Awesome video, exactly what I was needing for my 1st printed vinyl sticker. Thank you so much. As usual, you are my go to for excellent instructions.
So simple yet trendy! I love it! And that aqua vinyl is 😍😍 on this!
Thank you 😊
I love using printable vinyl.
Your videos and tutorials are Awesome! Thank you
Thank you 😊
Girl .. thanks ☺️. Loved the tutorial. And your dimples are too cute 😍
Thank you
What a cute, fun and stylish idea! Love the cup!
Thank you 😊
That was so helpful! Having bleed on makes sense. It looks the best without the white outline. Love your videos! Would love to see a full sanding video.. with your techniques for a smooth cup 😍💕
thank you!
Flynn couldnt wait for the wednesday tutorial but my goodness you are glowing...😘🤗 love this video. Easy and cute
😊 thank you
Learning and didn't realize there are different cricket so ordered joy cricket , hope I won't be disappointed
So glad you did this tutorial!!!! I couldn't find a good video either and I didn't want to use waterslide and have to spray seal it. Again, thank you!
Glad it was helpful!
I thought you were outside! Then I remembered you had backdrops...lol
🌻
Thank you for being classy and professional in your videos. I really dislike tutorials when they are wearing a low cut tank top. I find it distracting and unnecessary. You are a breath of fresh air and I enjoy watching your videos and refer to often for help. May you always bring the best tutorials on youtube!
Thank you so much ☺️
Thank you for this tutorial! I wasn’t doing the settings correctly and I was about to buy a new printer. I really appreciate your videos!
happy to help! thanks for watching!
I am so excited to try some printable vinyl
Amazing!!! You look gorgeous in that shirt with that backdrop...perfect!! Thank you for explaining the System Dialog Box!!! Awesome job, Sis!!🥰🥰🥰
I love your back drop 😍🌿 , your so beautiful! Great tutorial :)
Thank you 🥰
I’ve been hearing about Quick Coat lately - thinking I might have to try it. I had some vinyl letters lift last week and it seems this might help. Good tip.
It’s kinda spendy but it’s a great tool for cups. It’s saves me a lot of headaches!
I love your videos. Thank you so much. The cup is beautiful!!!
Thank you 😊
Cups is beautiful ❤️ can’t wait to try it.
Thank you 😊 can’t wait to see!
Great work as always 💕 but what is your most favorite machine that u primarily use for your crafts....cricut explore, explore air?? Which one is BETTER lol
I have the explore air 2 and it works great for everything I need
Much easier to work these flowers using water slide paper
Can I use modpog or 2x clear instead of quick coat? Will it have the same affect?
So cute! I have a silhouette cameo and can never get the print and cut to work!
Oh bummer! I don’t have a silhouette but if I get one we’ll definitely get some tutorials uo
Love the cup you are so talented. I saw when you glitter the cup on live. Where is that video I am. Newbie to tumbler world
ua-cam.com/video/IVVxGmERQ-w/v-deo.html
Thank you for this tutorial! Your work is beautiful! What’s the difference in the decal and the printable vinyl?
Thanks! The decal is permanent vinyl not printable
Love all of your videos! Thank you :)
Thank you 😊
I love your videos. Can you Do a tutorial showing how to connect your printer to your cricket if that’s how you print your decals
thanks! you don't need to connect your printer to your cricut. your cricut software will tell your printer print the image, then you'll place that printed sheet of images on a cutting mat and run it through the cricut. so that's basically what this whole tutorial is about
Can’t wait!!!! I have been waiting since you did that live! love ❤️it!! The water base you used was it matte? Or gloss?
Quick coat only comes in like a semi gloss finish. If i were using Polycrylic instead I’d probably want to use a gloss
Flynn Sisters Boutique thanks love! 🧡❤️🧡❤️
Love it, now I wish I would have gotten Cricut 🤦🏻♀️🤣
Trust me there’s a lot of people having issues with cricut design space don’t waste your money lol
I’m wishing i would’ve got a cameo
Hello! I m new at this. I want to do the print and cut with printable vinyl. Am I able to use my Epson inkjet printer? It is not a sublimation printer and it has not been converted into one. Thank you for any help and advice given 🙂
Your question is unclear to me. If you are using white printable vinyl sheets to print and cut on a tumbler, yes. You have to epoxy over that vinyl.
Thank your for sharing. Do you have a video on how to cut the sunflowers on the vinyl setting after printing. Im more of a visual learner. Thanks
I thought we covered that in the video. You'd just select "custom" on your cricut then select "printable vinyl"
Thanks for the video.
I’m curious … if it’s not sealed with resin, will the colours run when washing? I’m guessing yes but I thought I’d ask :)
Yes. It has to be sealed under epoxy.
Hi lovely lady 🥰 thanks so much for your simple and professional tutorials! Can I ask, I notice you like to sand your cup after epoxy to smooth it out for decals and final coat of epoxy, but I haven’t yet seen a video on how you tidy up the inside top edge of your cup? How do you avoid mess on the inside rim, and when you get mess, how do you fix?
here's a beginner video where i show you how to clean up at the end - ua-cam.com/video/C-j1YJEX-1k/v-deo.html
You look stunning!!😍😍😍
Thank you ☺️
Great tutorial! Thank you for sharing! Can I use clear spray paint to seal the vinyl? Thank you! ☺️
Awesome I’ve been trying to figure this out! Thanks A lot❤️
thanks so much 😍
Why’re you so perffffff?! You’re gorgeous 😍 and you have an amazing talent 💜
I absolutely love the color of the decal, the saying matches the cup perfectly and the placement of the decal is perfect!
@@EmilyMineDesigns thanks Emily!
great video, i'm looking to use printable vinyl on a motorcycle helmet, i know I will most likely need to seal the vinyl so that if it gets wet the colors won't run, do you have any recommendations
Gorgeous
I need to learn this but for my Silhouette.....can you post a silhouette tutorial please!!!
I don’t have a silhouette but maybe we can do that in the future if I get one
Thank you so much Jessica for this demo. Super cute cup!! I have a maker. My print and cut even after calibration never lines up. Any suggestions other than me throwing it in the trash lol.
I would contact Cricut, but also see how it does plugged directly into your computer?
I know this is from awhile ago and hopefully you figured it out by now but if not have you made sure you have no direct light over your Cricut? If there is, the light can mess with the laser and calibration making for messy cuts that end up in the garbage :(
Love the video, I am just starting to try to make these tumblers. So informational. Also I LOVE your shirt where did you get it>
Happy to help 😊 it’s from H&M
@@FlynnSistersBoutique It is adorable and you are so pretty!! Love the videos it is helping me a lot to get started.
I really need to know what is the size I need to cut a wrap for a 20 Oz tumbler on the cricut. Please help
Different tumbler brands have slightly different measurements. You can see if the supplier you purchase from can give you their exact measurements or you can get it with a tape measure
Im new to this, 😔 does anyone know how she cut the sunflowers on the cricut?
Awesome video by the way!
Here’s a newer video that might help - HOW TO PRINT THEN CUT WITH PRINTABLE VINYL AND CRICUT
ua-cam.com/video/KskYcqpWvGw/v-deo.html we used the Cricut print and cut feature. So design space will send the image to your printer to print, then you place the printed material on your cutting mat and put that through your machine.
Thank you so much!! I love your videos, they are great! 🤩
How did you go back and cut the vinyl out? Do you have to use registration marks?
Love love Love
I am trying to understand the difference between when you are epoxy and when you do a clear coat as you mentioned. I don’t know how else to ask that question
you don't have any of the products you used except for the vinyl, which quick coat did you use and where can it be purchased, other than that your video was good
My products are linked in the description box. Also, I did mention the name of the quick coat sealer from counter culture..which you can buy from counter culture 😊
First, your videos are awesome! Would you suggest sealing the images before application?
Not for this vinyl, you don’t have to seal it at all
I wondered the same thing! I would think the ink would run when you apply epoxy!
Are you printing straight onto the vinyl? Whenever i do that it just bleeds out and makes it look blurry and the ink doesn't dry. Please help!!!!!
You have to print on printable vinyl. Not regular adhesive vinyl.
Hi, loved your video. I was wondering what brand of clear coat did you put on the sunflowers before you put epoxy on it?
Counter Culture DIY Quick Coat
Thanks so easy to follow
You’re welcome 😊Glad it was helpful.
My 1st time watching your video.....LOVED IT!! How did you get cheetah print?
I hand glittered it.
I’ve got a few tutorials on hand glittering leopard print on my channel 😊
Does it has to be QUICK COAT? Or can I use any water base urethane sealer?
I personally haven't used that so i can't speak on it. I'm not sure if it would yellow over time. For sealing, i use quick coat and have also used rustolem 2x clear gloss.
Ok thank you so much
What if you have a 12 x 24 will it allow you to print more?
You can only print to your printers capabilities
Hi! I am new to this. I was wondering why you used a printer instead of cricut vinyl and used the green thing you stick in the cricut.
I used cricut printable vinyl and printed it with my printer, then cut it with my cricut so I could get an actual image, like a picture, instead of just a silhouette or outline. The green thing is the cutting mat that holds the paper in place while it cuts.
So you added epoxy after the sealer. Did you sand before adding the letters? Then another final coat of epoxy?
You don’t really have to seal it, just epoxy right after that and you only need to seal before decals if you epoxy is bumpy or something
What printer do you recommend for the vinyl and water slides?
You can find the printer i used and recommend linked below the tutorial in my amazon link
@@FlynnSistersBoutique is that the printer you are currently using the canon pixma?
I saw other videos to please bleed off. But why didn’t she use transfer paper and just apply them all at once?
I'm not sure i understand your comment. My guess of "bleed off" is to let the inkndry before you cut or handle your printable vinyl so it doesn't smudge. Transfer tape on printable vinyl would peel off the ink when you remove it.
Great tutorial! I enjoyed watching the (previously) Live with Q&A making the leopard prints. Can I ask what kind of printer you're using? I saw in your previous video it's a Cannon, but is it inkjet or laserjet? It would have to be laserjet to stand up to the water based sealer, right?
I use an inkjet printer = it's a canon pixma mx922 and you don't have to seal this kind of printed vinyl.
@@FlynnSistersBoutique I have same printer. When I change settings to photo print it wants to use the little photo tray not the bottom feed. How did you change that?
@@FlynnSistersBoutique would this work with a canon Megatank? dye based ink?
Do you have any links for the Quick seal that you used?? Love the video by the way very very helpful thank you so much!
counterculturediy.com/product/quick-coat-4-oz-trial-size/
I must be doing something wrong my image smears after it’s printed. Help.
What kind of material did you use to print on and what kind of settings are you using when you print
Have you ever used a design on a regular full sheet and then wrap it on your cup?
No, I haven’t.
any reason to use vinyl instead of sticker paper?
I dont know how sticker paper will do with the ink or epoxy.
Love it!!! We don’t have to seal it if we use an inkjet printer?
No you don’t for printable vinyl, you can epoxy right over it
@@FlynnSistersBoutique oh that is great news!! One less step to worry about lol
What is the thing that rotates the cup whilst you are putting the urethane on? Thanks.
It’s a cup turner from TheBoan on Etsy 😊
So where could find those sunflowers. really love them
I’ve linked them in the description box 😊
I am using an HP OFFICE INKJET 8710 and my cricut printable vinyl came out wet and I am 14 hours later and it still is almost as wet as when it came out the printer. Do I have the wrong printer or could it be because I didn't select "photo' and 'matte' in the options for my printer? Please, help.. Thanks in advance!
you want to select "photo" printing for sure and matte would be the proper option for that material
As always, great video! What does the decal on your Cricut say?
Thank you 😊 it says “I can’t, I’m crafting today”
Hey, first off I love your tumbler!! quick question about that printable vinyl. What kind of printer do you use? and do you have to seal it? I have seen where you have to put clear vinyl over it. I have bought SOOOO much printable vinyl and haven't in over a year used any of it. lol PLEASE HELP
I have an inkjet printer and I don’t seal it or put anything over it.
@@FlynnSistersBoutique awesome thanks for getting back with me.
I’ve binged all your videos and love them all. You’re such a great teacher. What kind of canon printer you have?
thank you so much! I have a Canon Pixma MX922
Could you explain why you epoxy over the flowers before applying the decal? And what is the difference between the vinyl printed flowers and the decal?
you could just add them all in the same layer as long as the regular vinyl application wasn't going to overlap or damage the printed vinyl
Can I just use prefix at clear spray paint to seal it before I epoxy?
My cricut doesn't seem to have the same settings you did when it became cutting time, I ended up printing my imagine on my printer in black and while, So frustration to print to cut.
Did you adjust your printer settings? That sounds more like an issue with your printer?
Hi New Follower! I was wondering. You print directly on a printable vinyl correct?
Love you work btw!!
My printable vinyl is coming out with lines and the colors are not super bright how can I fix this?
Also I am new at this what would you recommend to seal the vinyl with? I am using small clear water bottles.
you don't need to seal the vinyl. you can epoxy over it. If your vinyl is coming out with lines, you need to make sure you've optimized your print settings for "photo printing" and high quality print options
@@FlynnSistersBoutique thanks
Hi what is the water base glue that you put before epoxy? Thanks
counterculturediy.com/?s=quick+coat&post_type=product&type_aws=true
Hi can I ask on brand of sticker paper you are using? Am I supposed to seal sticker paper first below applying . Thank you love your videos
You need printable vinyl. I use the Cricut brand
Hi. Quick question. I bought the quick coat you suggested. I put some stickers on my tumbler that I had printed out. I let them dry for a day and a half. When I received the quick coat and I applied it like you did, my ink started spreading off my stickers. Any suggestions?
What kind of printable vinyl did you use?
@@FlynnSistersBoutique I used DOTAC transparent premium vinyl sticker for inkjet and laser, and also GWYBKQ printable vinyl sticker paper
For inkjet printer
@@FlynnSistersBoutique matte
Hi, when I put my quick coat the ink on vinyl starting running. So the entire image got mess up :-(. I printed the image on Cricut printable vinyl last night and put the quick coat today. Do I have to wait 48hrs before putting any coat or sealer? Thanks
you don't have to wait 48 hours and you also don't need to seal Cricut Printable vinyl. it will do just fine without sealer. i'm sorry that happened!!
Im having such a hard time with printable vinyl for a dark image. I usually do bright images but this time the customer wants this dark lots of black and its not coming out right the edges curl up.. its a disaster. Any tips?
What kind of printer do you have
canon pixma mx922 inkjet
hello does your printer have to be for sublamation?
No I have a regular inkjet
Im new to this so maybe a dumb question but if you were to lay your decal right after laying the sunflowers and then epoxied both, would that work? instead of two separate coats?
you can unless your final decal overlapped the printable vinyl, because that would cause a crease in your vinyl decal
so pretty! What printer do you use to get these so vibrant?
If i wanted to use a. Spray sealant on the vinyl before applying my decals is it ok to do so?
I wouldn’t
I had decided to do a trial and error so I spray painted my cup, sealed it, used my vinyl and then placed the epoxy. I did have to strip it because I messed up when i mixed the epoxy. I realized afterward. i hope I don't have to strip a second time.
WHERE DI YOU FIND THE SF
You can find it linked in the description box as stated in the video 😊
Can you print photo images using the same method ?