I configured Acedeck's CNC 2-in-1 Gear Drive Kit to four wheels. It was a drive kit with good performance, design, and build quality. Another advantage was that it could be fully utilized as a DIY build. St-type gear drives seem to be more and more satisfying than belt drives as it becomes easier to replace adapters and wheels. Acedeck의 CNC 2-in-1 Gear Drive Kit을 4륜으로 구성해봤습니다. 성능, 디자인, 만듦새가 모두 좋았던 드라이브 킷트였습니다. DIY 빌드로도 충분히 활용가능한점도 장점이였습니다. St 형태의 기어드라이브들이 어뎁터들과 바퀴들을 갈아끼우기 쉬워지면서 밸트드라이브 보다 점점 만족도가 높아지는것 같습니다. (10:33 만듬새 -> 만듦새)
Love your teardown / installation videos, they're so methodical. Whenever I attempt putting a component back together, I end up having to buy a new board😊
⚡🤙🏼 *The new Acedeck gear drive!* 🤙🏼⚡ Gear Drive + Street Wheels = 🤩🤩 Loved this edit, the music, the purple text to match the colour in the gear drive! 👌🏼 Colour reminded me of classic DC villian Joker 🤙🏼 My favourite villain! No screechy whine, pretty quiet. Sounded like revving the engine at 7mins 45sec 😂🔥🔥 35mph omg 😱 When you put the Madder Mad Wheelz on 🤩 Another great video 👏🏼👏🏼
Yeah, I'm reminded of the Joker after hearing you. lol~ Because I use a directional microphone when shooting, the sound is recorded louder than it actually is. But it was actually a really quiet gear drive. Installing the Mad Wheels will reduce the ground clearance a little, but it is expected to be cooler. Thanks, Bro~ :P
@@KAMiJUINs you’re a great rider with passion. Your videos are great to watch for anyone over the world. Simple, effective, instructive and smart. A real good job. Love the spirit of the way you’re riding.
Hi..Kami..i bought this system for my Ares X1 V2 so looking forward to ripping around the streets...Great videos awsome little doggie great esk8 duo..👍
I just ordered an Element system a week ago and can’t wait for it to arrive and installed. That so awesome having them on an AWD, I was just thinking about this exact same set-up on the AWD 2022 belt version of the X1
As I mentioned in the video as well, when installing the kit on the 2022 version of X1, the edge of the deck should be slightly ground out as interference between the motor and the deck can occur during deep carving.
No, pairing is initialized by pressing and holding the remote control power button for about 7 seconds. Then, you can re-set various settings, where you can also set the diameter of the wheel.
Hey, what about the 8mm/10mm stepped axles on Evolve and similar trucks? There is the 10mm axle spacer for the Acedeck trucks, is that going to work with a stepped axle truck?
@KAMiJUINs Ok great thanks. Did you maybe also try to mount it physically on the omni trucks(I want to buy those)? Yes I know, mostly the street wheels come with 8mm bearings and spacers, this is why I was asking as I prefer street wheels and also have a bunch laying around. Also 8mm bearing are stronger/durable vs the 10mm ones because they have bigger balls and so higher load tolerance.
The gear drive of the N1 you're using is dedicated to AT wheels. In order to use the ST wheel, the gear drive kit introduced this time must be installed.
@@KAMiJUINs Was hoping for just an adaptor instead of buying an entire drive system which is costly to do cause u have drive sytem cost then wheel cost,pricey better just getting another board
Hey Kami I measured my ownboard trucks and hole spacing is 30mm. Can you maybe confirm the spacing on the Omni Esk8 trucks is 25mm and the gear drive fits?
@@KAMiJUINs Thanks ✌️👌🙏, I asked because in this video I think you made a mistake at 10min49s saying the distance between the holes is 25mm, so I was confused 🧐😃
Just saw your video on the meepo ninja. Have not skated in 20yrs and was looking to get an esk8.. I don’t need something crazy fast off the line but was interested in range.. 6’1 250lb.. what would you recommend? Live in nyc
Hello! check this out Board : acedeckboards.com/products/ares-x1-2023 Gear drive: acedeckboards.com/products/element-2-in-1-gear-drive-kit Unfortunately, it's all sold out at the moment. Maybe a new model will be released soon.
I configured Acedeck's CNC 2-in-1 Gear Drive Kit to four wheels. It was a drive kit with good performance, design, and build quality. Another advantage was that it could be fully utilized as a DIY build. St-type gear drives seem to be more and more satisfying than belt drives as it becomes easier to replace adapters and wheels.
Acedeck의 CNC 2-in-1 Gear Drive Kit을 4륜으로 구성해봤습니다. 성능, 디자인, 만듦새가 모두 좋았던 드라이브 킷트였습니다. DIY 빌드로도 충분히 활용가능한점도 장점이였습니다. St 형태의 기어드라이브들이 어뎁터들과 바퀴들을 갈아끼우기 쉬워지면서 밸트드라이브 보다 점점 만족도가 높아지는것 같습니다. (10:33 만듬새 -> 만듦새)
Felt like I was watching a movie! The professional editing/lighting is top notch stuff. This gear drive looks incredible as well. Awesome video!
Thank you for saying that and watching it too~ :)
I love the Linnpower motor pulley tool!
With your wheels lol~ :)
Waiting for it to stop raining so i can finish my testing with this same system
Okay, I'll look forward to your review, Bro~ :)
Love your teardown / installation videos, they're so methodical. Whenever I attempt putting a component back together, I end up having to buy a new board😊
Thank you for saying that~
This gear drive kit is easy to assemble and disassemble, so if you have an N1 or X1, you won't have to buy a board again :)
Wow!! Gear drive board is very awesome
Thanks bro~ :)
acedeck has consistently made interesting boards and parts to modify them with. I'm interested to see what they'll come up with after this
I like that about them, too. It's a brand that I'm really looking forward to in the future.~
⚡🤙🏼 *The new Acedeck gear drive!* 🤙🏼⚡
Gear Drive + Street Wheels = 🤩🤩
Loved this edit, the music, the purple text to match the colour in the gear drive! 👌🏼
Colour reminded me of classic DC villian Joker 🤙🏼 My favourite villain!
No screechy whine, pretty quiet. Sounded like revving the engine at 7mins 45sec 😂🔥🔥
35mph omg 😱
When you put the Madder Mad Wheelz on 🤩
Another great video 👏🏼👏🏼
Yeah, I'm reminded of the Joker after hearing you. lol~
Because I use a directional microphone when shooting, the sound is recorded louder than it actually is. But it was actually a really quiet gear drive.
Installing the Mad Wheels will reduce the ground clearance a little, but it is expected to be cooler.
Thanks, Bro~ :P
As usual, excellent video. Thanks Kami
Thank you for watching too :)
@@KAMiJUINs you’re a great rider with passion. Your videos are great to watch for anyone over the world. Simple, effective, instructive and smart. A real good job. Love the spirit of the way you’re riding.
Hi..Kami..i bought this system for my Ares X1 V2 so looking forward to ripping around the streets...Great videos awsome little doggie great esk8 duo..👍
Hi~ Steven. I hope you enjoy this system as much as you have expected.~
Thank you :)
I just ordered an Element system a week ago and can’t wait for it to arrive and installed. That so awesome having them on an AWD, I was just thinking about this exact same set-up on the AWD 2022 belt version of the X1
As I mentioned in the video as well, when installing the kit on the 2022 version of X1, the edge of the deck should be slightly ground out as interference between the motor and the deck can occur during deep carving.
id love to see you build a vesc powered onewheel someday
Yeah, I'll try if I get a chance someday~ :)
@@KAMiJUINs
bro is an engineering menace
역시!! 까미주인님만의 멋진 👍 영상 잘봤습니다
감사감사합니다~ :)
yoo sick!. them gear drives loook crazy good!
Yeah, It was~ Thank you for watching :)
Seems KAMi's doing all the work then you just get to ride ☺
HaHa, That's so true~ Actually, the owner of this channel is also KAMi. lol
좋은 리뷰, 정말 대단해요 👏 😊👍
Thank you x 10000 Bro~ :)
nomade에 사용할까 싶어서 고민하던 제품인대 벌써 리뷰를 올려주셨내요. 리뷰 영상을 보니 고민하지 말고 물건이나 빨리 받을껄 후회중입니다 😂
아 그러셨군요. 네 충분히 고려해볼만큼 괜찮은 제품이였습니다. 개인적으로도 추천드릴수 있을것 같아요~
시청감사합니다!
@KAMiJUINs do you loctite the gear to the motor shaft OR do you fit it loose counting on the gear drive enclosure to keep it in place?
The design of the gearbox is designed to fix the motor shaft and motor gear on its own.
Hey Kami love the content been subbed for about 2.5 years, I just moved to SK and was wondering if you knew of a store that sells EBoards?
Thank you for watching my videos for a long time~ :)
Check this place out
smartstore.naver.com/tggo/
When changing the wheel sizes with the Element gear drive, do you need to set up the wheel ratio into the ESC?
No, pairing is initialized by pressing and holding the remote control power button for about 7 seconds. Then, you can re-set various settings, where you can also set the diameter of the wheel.
@@KAMiJUINs Any idea what Drive Ratio I need to select? I will be riding on the 115mm wheels
Pro video as always 😊
So these element drives could fit on evolve trucks?
I’d seriously consider using them on my hadean bamboo
Thank you~ :)
I checked and found that this gear drive kit had a hole and a gap of specifications compatible with the Evolve's DKP truck
Hey, what about the 8mm/10mm stepped axles on Evolve and similar trucks? There is the 10mm axle spacer for the Acedeck trucks, is that going to work with a stepped axle truck?
Of course, the bearings and spacers of the wheels should be changed to an 8mm axle standard.
@KAMiJUINs Ok great thanks. Did you maybe also try to mount it physically on the omni trucks(I want to buy those)?
Yes I know, mostly the street wheels come with 8mm bearings and spacers, this is why I was asking as I prefer street wheels and also have a bunch laying around.
Also 8mm bearing are stronger/durable vs the 10mm ones because they have bigger balls and so higher load tolerance.
Primo on assoluto a guardare 😊
Si', congratulazioni~
Hey where did you get the gear puller for the motor shaft?
As you can see in the video, the gear remover was a component included in the gear drive kit.
@@KAMiJUINs thank you. I failed to realize
Which remote is this and where is that cover from? Is this the same remote as the Tynee Mini 3 Pro (Explorer ESC 2.0) Remote?
Nope, it's for Aecdeck's remote. It doesn't fit the remote of the Mini 3
Wow!
Thank you for watching :)
I have a Nomad gear drive, do they have a street wheel adaptor ??
The gear drive of the N1 you're using is dedicated to AT wheels. In order to use the ST wheel, the gear drive kit introduced this time must be installed.
@@KAMiJUINs Was hoping for just an adaptor instead of buying an entire drive system which is costly to do cause u have drive sytem cost then wheel cost,pricey better just getting another board
Hey Kami I measured my ownboard trucks and hole spacing is 30mm. Can you maybe confirm the spacing on the Omni Esk8 trucks is 25mm and the gear drive fits?
The Omni truck and this gear drive fit well. Be sure to watch #216 video :)
@@KAMiJUINs Thanks ✌️👌🙏, I asked because in this video I think you made a mistake at 10min49s saying the distance between the holes is 25mm, so I was confused 🧐😃
That is some cool shit!!
Thank you for watching :)
Just saw your video on the meepo ninja. Have not skated in 20yrs and was looking to get an esk8.. I don’t need something crazy fast off the line but was interested in range.. 6’1 250lb.. what would you recommend? Live in nyc
Thank you for watching my video~ :)
How much are you thinking about the budget?
@@KAMiJUINs 1200
Then, go with the ninja
@@KAMiJUINs thanks for the suggestion!
Would this work on m boards interstellar 2.0?
Well...I don't know because I've never seen M board in person
Will this gear drive work with a Omni Esk8 build…
Yeah that's possible!
@@KAMiJUINs thank you, and your channel is amazing…
Fra, puoi provarlo su Nomad N1? Perché Nomad con le ruote da strada sembra molto attraente
Magari un altro revisore lo fara' a breve.~
Hello, tell me the name of the electric skateboard ?
Hello! check this out
Board : acedeckboards.com/products/ares-x1-2023
Gear drive: acedeckboards.com/products/element-2-in-1-gear-drive-kit
Unfortunately, it's all sold out at the moment. Maybe a new model will be released soon.
@@KAMiJUINs thank you very much
Как всегда красиво.
Спасибо большое за просмотр моих видео~ :)
chain drive next???
Well...
Anyway, thank you for watching :)