Where did you get the poles for this? They look like my fiberglass poles, but much more robust, and, perhaps, a light plastic? I would like to find some telescoping poles like this. Thanks.
Good morning, this antenna was bought or was made for you? Which measures the reeds? Or it will have the schema for me to build such an antenna? Thanks in advance
Super Nice m8 super Nice that you show this idea Tnx 73s Yes i also QSO With a guy in India With the same principle on the antenna and it worked very very well up here to Norway 5/9 loud and Clear on his 50 watt so time to build one of the same to bring out for DX :) Great work m8 great Idea tnx for sharing this With us all and keep up Your good work regards Junior In Norway :)
Hi, i was sent this video by a guy who purchased one of these from you. Are you still making and selling them? I might be interested in buying one. Thank you!
What a nice home brew job you have made with the antenna. Can you tell me with the feed point, was it a 1:1 Balun? Or did you just split the coaxe where the braid went to one side and the centre conductor to the other side of the driven ele. Very impressed with antenna, so much, I will make one myself. Thanks
I have never hidden the antenna's authorship G4ZU, as you can see on my website. This is specifically version designed expecially for portable use, and redesigned with antenna-software to have better f/b response and a symmetrical structure with four spreaders of equal length, as in Spiderbeam. I think you've made the discovery of hot water! :))
Complimenti per l'esecuzione dell'installazione. Io ho iniziato con la CB anche se avevo già la patente da radioamatore e mi sono divertito sempre tanto a costrire antenne. Dopo 32 anni di "silenzio radio" , ho ripreso un anno e mezzo fà ed apprezzo tanto le nuove idee in antennistica . Una domanda : come si chiama il raccordo che usi per mettere assieme le 4 canne da pesca ? Ed i raccordi fissati in punta alle canne ? Buone cose e buoni dx.
Grazie per i complimenti! Il raccordo non so come si chiama, ma sono raccorderie per idraulica opportunamente modificate, anche la T che vedi dovrebbe essere un portagomma da 16mm. Ciao 73's
You can not compare this antenna to an Imax 2000, because it same if you compare a 3 elem yagi with a vertical 5/8... anyway usually on dx contacts difference is 3 to 4 S points more and less QSB. The SWR is not necessary to tune, because the antenna cover 1,7MHz bandwidth, anyway for fine tuning need only to adjust the central dipole of few millimeters. 73's
Muy buena organizacion de los elementos que constituyen esta antena y tambien muy buena altura sobre todo muy buen video. 73 cordiales.
like your style!.......looking forward to getting mine up
Where did you get the poles for this? They look like my fiberglass poles, but much more robust, and, perhaps, a light plastic? I would like to find some telescoping poles like this. Thanks.
This is the The G4ZU Bird Yagi In the ARRL Antenna Compendium, Volume 2 (pp. 58-60), Dick Bird, G4ZU, presented his variant on the 3-element Yagi.
Good morning, this antenna was bought or was made for you?
Which measures the reeds?
Or it will have the schema for me to build such an antenna?
Thanks in advance
Super Nice m8 super Nice that you show this idea Tnx 73s Yes i also QSO With a guy in India With the same principle on the antenna and it worked very very well up here to Norway 5/9 loud and Clear on his 50 watt so time to build one of the same to bring out for DX :) Great work m8 great Idea tnx for sharing this With us all and keep up Your good work regards Junior In Norway :)
Hi, i was sent this video by a guy who purchased one of these from you.
Are you still making and selling them?
I might be interested in buying one.
Thank you!
What a nice home brew job you have made with the antenna. Can you tell me with the feed point, was it a 1:1 Balun? Or did you just split the coaxe where the braid went to one side and the centre conductor to the other side of the driven ele. Very impressed with antenna, so much, I will make one myself.
Thanks
The feed point need a 1:1 balun or asimple RF-Choke does a great job. 73's Alex.
Very Good Alex,Convinced me to buy one for future portable locations.
@1SD019 Thanks for the reply. Would be great then for portable use.
73
I love mission impossible but would love more to know where to buy the skypper antenna how much
I have never hidden the antenna's authorship G4ZU, as you can see on my website.
This is specifically version designed expecially for portable use, and redesigned with antenna-software to have better f/b response and a symmetrical structure with four spreaders of equal length, as in Spiderbeam.
I think you've made the discovery of hot water! :))
Great video..
But think the skyrex beam is better antenna .. Love the builds you have done be nice to see performance on your radio
26sw119. Op steve
Complimenti per l'esecuzione dell'installazione. Io ho iniziato con la CB anche se avevo già la patente da radioamatore e mi sono divertito sempre tanto a costrire antenne. Dopo 32 anni di "silenzio radio" , ho ripreso un anno e mezzo fà ed apprezzo tanto le nuove idee in antennistica . Una domanda : come si chiama il raccordo che usi per mettere assieme le 4 canne da pesca ? Ed i raccordi fissati in punta alle canne ? Buone cose e buoni dx.
I think I love this antenna....
how much???costed??
Mission accomplished... Almost, the video is 03:53 Min. long!
It say's in under 5 mins!!!!!
What kind of Application is this antenna used for?
what is the base version of this antenna?
Do you have a part number and source for the center 5-way cross fitting?
yeah available from Skypper of course
Hi there I really like the Antenna where to buy or self made ????
do you think this would work for Ghz?
Fantastic design
Base version is almost the same but with iron central cross and clamps, and heavy rods..
Anybody know how effective this antenna is? Don't know anyone that has it.
It is effective like any other 3 elements YAGI... the principle is the same.
erections are prohibited on youtube.
Grazie per i complimenti!
Il raccordo non so come si chiama, ma sono raccorderie per idraulica opportunamente modificate, anche la T che vedi dovrebbe essere un portagomma da 16mm.
Ciao 73's
complimenti, vorrei farmela anch io.....ma non riesco a trovare quel 5vie che hai usato per fare il supporto....dove posso trovarlo? nome?
Hi there, I couldn´t open the website, do you sell this antenna? could you please send me more information? thank you bro
Sorry, I do not sell this antenna anymore.
There are other in Europe that sell it. 73
Can you tell me where?
Hi Xavier, try ask to 30DA016 Dave... on:www.dx4.us/
It is a portable amateur-radio antenna.
Legend👍
You can not compare this antenna to an Imax 2000, because it same if you compare a 3 elem yagi with a vertical 5/8... anyway usually on dx contacts difference is 3 to 4 S points more and less QSB. The SWR is not necessary to tune, because the antenna cover 1,7MHz bandwidth, anyway for fine tuning need only to adjust the central dipole of few millimeters. 73's
thanks for the vid, want to hope there is no wind :)
vk2mrx
very nice!
@DENMONKEY : with wind, I should only add 3 guy wires...I've used antenna under storm for weeks, without problems...
73's
Excellent!!
COOL
good music~
73!
very nice...
parfait bravo
Great video and channel. I subbed to your channel. Cheers & 73's 9 UDX 791
Wow. ....cool!
excellent antenna, but we could do without the music..sorry
73s Good antenna good DX
Pity about the distracting music, good though it is.... on its own!
73 de 14 Victor 728 (03)
belle vidéo et musique.
Merci.
Super napravito 73 Hrvatske
МНЕ ПОНРАВИЛОСЬ!!! :)
lol ~ Great~!
GREAT VIDEO OM DE K9IOU
(y)
fine, 73 from ua0ww