Installing LED V1 Trunk Light Bar on a 2018-2024 Toyota Camry LE/SE/TRD

Поділитися
Вставка
  • Опубліковано 16 січ 2025

КОМЕНТАРІ • 91

  • @pistolgrip70x
    @pistolgrip70x 2 роки тому +3

    Nice job, would love to see that same install on a 2022 Santa Fe that has the red strip bar but doesn’t do anything

  • @cindyren3588
    @cindyren3588 3 роки тому +4

    How did you get the backup camera open?

  • @uncoqui
    @uncoqui Рік тому +1

    I replaced mine on my 2023 TRD, with the same set. Nike lights for signal, and the bar in the center, and now I am looking to replace the front lights. Do you have any recommendations on which to look at?

    • @BeatbyT
      @BeatbyT 2 місяці тому

      Any issues with shorts or water with the Nike lights? I see complaints on HRS with these. Where did you get them?

  • @misfitpanduh3286
    @misfitpanduh3286 2 роки тому +4

    Loving these videos makes me want to do some changes to my 2021 SE though idk how a new muffler would sound on a 4cyl

    • @aucool7869
      @aucool7869 2 роки тому +6

      I have a '19 Camry LE (2.5 L 4 cyl of course). I got a Magnaflow muffler installed on mine, since I was in no mood to drop more cash on a cat-back, despite how amazing they sound. The muffler sounds pretty nice, low key and not too loud but it has a nice deep tone, especially after it gets broken in. It sounds quiet when I'm driving slow or normally but if I give it some gas it comes alive. I've gotten compliments from people for it so honestly I think you'll like it. Do some research on different mufflers, but I personally would recommend a Magnaflow.
      After you swap the muffler, I'd look at some other tips just to spice up the look. Since the LE just comes with a pipe and not a dual tip like the SE comes with stock, I got a bolt on DC Sports tip. But that's just a suggestion.
      Sorry for the long reply, I just know that resources for muffler swaps on 8th gen Camrys are practically non-existent. Hope this helps!!

    • @ControllerSpam
      @ControllerSpam 2 роки тому

      @@aucool7869 ive heard it sounds similar to having no mufflers. Is this true? I dont really like the sound of the no mufflers.

    • @ethanreeves766
      @ethanreeves766 2 роки тому

      @@ControllerSpam If you've got the money for a cat back, the magnaflow 19410 has a really mellow sound that I think cleans up the stock 4 cyl "economy car" puttering that is has. Gives good tone without being loud, and it's a single side exhaust similar to stock. Theres a video on youtube if you want to hear it.

  • @elisherellis6955
    @elisherellis6955 11 місяців тому

    It looks real good man I love the l e d bulbs lights on me🫵🏾👍🏾

  • @JD-wm4uv
    @JD-wm4uv 2 роки тому

    Awesome lighting effects

  • @deresolute1061
    @deresolute1061 3 роки тому +1

    Can you do a fly by and some downshifts? I'm on the edge about buying magnaflows dual exhaust. Their video sounded horrible and droney but yours was in the suggestions and the two quick blips of gas you did sounded amazing for a 4 banger. Now I wanna hear more to further invest in the thought of buying one lol

  • @lahkpro3650
    @lahkpro3650 2 роки тому +1

    Please don’t miss films every step

  • @johannymanzanares4720
    @johannymanzanares4720 2 роки тому +1

    I took my car to the Maco body shop and they installed the light, but only the exterior lights turn on, the trunk lid light doesn't turn on, why is it?

  • @KevinShroff
    @KevinShroff 2 роки тому +1

    Hey I wired the Trunk LED on my LE camry as described but it doesnt turn on or work at all, any ideas? Lexus tail lights are working great

  • @jc-diaz487
    @jc-diaz487 3 роки тому

    That’s soo dope !! I love it !

  • @ltcolcapybara
    @ltcolcapybara Рік тому

    Mine must be different cause I connect the brake light to the appropriate wire and only one side reacts to the brake so now I gotta figure it out 🫠

  • @flaco581
    @flaco581 Рік тому

    can u do on a XLE trim ?!

  • @insert_name_here9353
    @insert_name_here9353 Рік тому

    Wait the v2 reflectors have a start up sequence?!?

  • @joeyfarino9657
    @joeyfarino9657 2 роки тому

    Mine didn't come with weatherstripping...did yours?

  • @xXBIGBADPOPSXx
    @xXBIGBADPOPSXx 2 роки тому

    Jay where did you get the white emblems?

    • @crimsonkamuri
      @crimsonkamuri  2 роки тому

      Not my car sorry

    • @xXBIGBADPOPSXx
      @xXBIGBADPOPSXx 2 роки тому

      Where’s your car do videos of your car? I just got a blue Camry

    • @crimsonkamuri
      @crimsonkamuri  2 роки тому

      @@xXBIGBADPOPSXx there’s 39 other videos on my channel bro

    • @xXBIGBADPOPSXx
      @xXBIGBADPOPSXx 2 роки тому

      @@crimsonkamuri my bad bro I seen the other videos

  • @michaelfleming3474
    @michaelfleming3474 Рік тому

    Bru that hard af 🔥🔥🔥 💯

  • @gosto6552
    @gosto6552 2 роки тому

    Hi there, I connected my I followed the wires diagram. the animation work fine the taillight work fine but I can't get the stop light to work. Any tips out there. Thanks.

  • @0ppongcollins222
    @0ppongcollins222 Рік тому

    What’s the brand name of your tail light please

  • @akinwaleakinrinde8964
    @akinwaleakinrinde8964 Рік тому

    Hi, I'm trying to install the same foglights on a 2019 Camry. I want to cut off the foglights power when the high beam is on. Do you know how I locate the high beam power source? My Camry came with a Bi-led headlights.

  • @MrMarkozcortez
    @MrMarkozcortez 2 роки тому

    Where did you get the bumper lights send me the link please

  • @georgesenju9843
    @georgesenju9843 2 роки тому

    Do the trunk lights have to come out on an xse to take off the trunk bar

    • @crimsonkamuri
      @crimsonkamuri  2 роки тому

      the inner taillights have to be taken out every Camry to take off the bar no matter what trim you have

  • @lightsone2
    @lightsone2 2 роки тому

    Looks good!

  • @Revsb1
    @Revsb1 2 роки тому

    My camry only has white ,blue and black on both sides, any help?

  • @frostyuplift7269
    @frostyuplift7269 Рік тому

    Will it work on the TRD ?

    • @crimsonkamuri
      @crimsonkamuri  Рік тому

      Hmm that title to the video sure says it 😂

    • @frostyuplift7269
      @frostyuplift7269 Рік тому

      @@crimsonkamuri idk how I missed that ☠️

    • @crimsonkamuri
      @crimsonkamuri  Рік тому

      @@frostyuplift7269 😂😂😂😂😂😂😂 it’s all good trust me it happens all the time

  • @therealwill_i_amsonofrobin4330
    @therealwill_i_amsonofrobin4330 2 роки тому

    Will it work with factory tail lights

  • @pjduong11
    @pjduong11 3 роки тому

    It’s pretty much the same process for xse right? (The wiring with aftermarket tails)

    • @crimsonkamuri
      @crimsonkamuri  3 роки тому

      Yessir !

    • @scoutm8502
      @scoutm8502 2 роки тому

      I'm obviously very late; But I bought the 2nd version of this bar and the wiring kit it comes with is for the XSE, if I recall correctly. Didn't work with my SE so if you haven't bought it yet or installed it yet you may have a way easier time! 🤙

  • @descendinggod9740
    @descendinggod9740 7 місяців тому

    I find it very strange that they have a plug and play for OEM taillights, but not for aftermarket taillights. It really doesnt make sense when you think about it

  • @richscott2483
    @richscott2483 Рік тому

    I would have just stopped with the LED Trunk Light Bar .... all the other rear lights seem overboard. However, it is your car and the only person you have to please is yourself. Anyways, great job !!!! : ) You should redo your splicing and get some Heat Shrink or better yet use Wire Ferrule Terminals and crimp them. Electrical tape will become Brittle in a few years or start to unravel exposing the wires for possible short circuit.

    • @crimsonkamuri
      @crimsonkamuri  Рік тому +3

      Not my car and this was two years ago. I have the tools to do a cleaner job. Thanks for your input sir but i got this

    • @crimsonkamuri
      @crimsonkamuri  Рік тому

      Otherwise yes all the light is a little overboard imo

  • @orignlmedia7771
    @orignlmedia7771 3 місяці тому

    Amination?

  • @jdiaz813
    @jdiaz813 3 роки тому

    I see you got the XSE wheels!🕵️‍♂️😊 where did you get them?

    • @crimsonkamuri
      @crimsonkamuri  3 роки тому +1

      A good friend of mine weren’t using them and traded me for my wheels as emergency backups

    • @r.b6035
      @r.b6035 3 роки тому

      Are the lights for XSE plug and play or do you still need to tap wires?

    • @crimsonkamuri
      @crimsonkamuri  3 роки тому

      @@r.b6035 plug and play for XSE TAILLIGHTS. Anything else it will need to be spliced.

  • @E_Rice
    @E_Rice 2 роки тому +1

    Damn, this is 🔥! Great video.

  • @bobit8742
    @bobit8742 2 роки тому

    damn that look nice

  • @harleyjohnson2529
    @harleyjohnson2529 3 роки тому

    Where did you get the tail lights?

  • @SwordNeon
    @SwordNeon 3 роки тому

    do you have to take off your taillights for this install?

  • @offthewalljustin6464
    @offthewalljustin6464 3 роки тому

    Where can I get a front emblem for my Camry been looking everywhere and can’t find one
    Recently got into a wreck so that’s reason for question

  • @rajaa5889
    @rajaa5889 3 роки тому

    Great man

  • @shahasomer
    @shahasomer 3 роки тому

    Can u do a full review of your car……

  • @FrancisLeonNina
    @FrancisLeonNina 3 роки тому

    Wow it’s so much led but cool

    • @crimsonkamuri
      @crimsonkamuri  3 роки тому +1

      Right I agree lol so many moving lights but looks cool for showing off

  • @saulgoodman9193
    @saulgoodman9193 3 роки тому

    I thought you wrapped your camry blue when I saw the thumbnail

  • @abecerra80
    @abecerra80 3 роки тому

    This LOOKS SWEET 💙💙💙💙💙❤️‍🔥wish you were near me

  • @adelisa52797
    @adelisa52797 3 роки тому

    sick

  • @Hunter-kz6os
    @Hunter-kz6os 2 роки тому

    Long term would’ve been better to use a soldering tool and heat shrink. Electrical tape will just get hot during the summer and slip off.

    • @crimsonkamuri
      @crimsonkamuri  2 роки тому

      Old video sir. Been did that though. Learning as we grow. Thanks for watching.

    • @Hunter-kz6os
      @Hunter-kz6os 2 роки тому

      @@crimsonkamuri just got a camry last week, definitely going to be one of the first mods. Looks killer 👍

  • @alriciab.p.7936
    @alriciab.p.7936 3 роки тому

    Nice

  • @wireup4321
    @wireup4321 2 роки тому

    cool

  • @MacielXX
    @MacielXX 3 роки тому

    So how would you wire the light bar if you only wanted it to be static and not do any animation or turn signal?

    • @crimsonkamuri
      @crimsonkamuri  3 роки тому

      don't hook up the wires that are used for those specific parts

  • @redbaron2448
    @redbaron2448 4 місяці тому

    Come install/film these on my TRD Redbaron 💯
    Florida

  • @lancealot9984
    @lancealot9984 2 роки тому

    great work.....wish I lived a little closer so you can do all my lights to the 21 trd😊

    • @crimsonkamuri
      @crimsonkamuri  2 роки тому

      Where you live at ?

    • @lancealot9984
      @lancealot9984 2 роки тому

      @@crimsonkamuri I'm in Mississipi maybe i can ride up on my vacation so you can do the work i would appreciate it....

  • @wolffredd2664
    @wolffredd2664 2 роки тому

    Man I just realized it’s your Camry I’ve been drooling over on IG and the FB groups 😂

  • @elias_6199
    @elias_6199 3 роки тому

    Dam I need you to install mods on my car too I have the same Camry as your friend lol… 🙏🏼🙌🏼

    • @crimsonkamuri
      @crimsonkamuri  3 роки тому +1

      if you are in PA NY DE MD we can work something out

    • @elias_6199
      @elias_6199 3 роки тому

      @@crimsonkamuri dam, you need to come to Vegas my man. Definitely would a be a good vlogging trip.

  • @ruthwilliams3375
    @ruthwilliams3375 3 роки тому

    x9wka
    #vyn.fyi

  • @junglerzzz
    @junglerzzz Рік тому

    Fffuuuuuuuuuuuuu