Universaldübler für Holzverbindungen nutzen | wolfcraft
Вставка
- Опубліковано 19 жов 2024
- So einfach bohrst Du Dübellöcher für Holzverbindungen mit dem Universaldübler. Ob Eck- oder Flächen- oder T-Verbindungen: Einfach festspannen, bohren, dübeln - ohne Messen und Markieren.
Mehr Infos zum Produkt gibt es hier:
www.wolfcraft....
Der #Universaldübler besteht aus einer Bohrlehre und einem Brettspanner und ist für alle #Holzverbindungen geeignet. Die Bohrlehre hat zwei Reihen Bohrbuchsen für 6-, 8- und 10-mm-Dübel. Für jede Dübelgröße gibt es vor den Buchsen die entsprechende Führungsnut zum Abgreifen von eingebohrten Dübeln.
Der Brettspanner hat keine Bohrbuchsen und dient lediglich zum Abstützen bzw. Festspannen der Bretter.
Zuerst müssen die Seitenwände auf der Holzfläche sowie die Böden auf der Kante markiert werden. Festgespannt werden die Bohrlehre, der Brettspanner und Brett mit Spannschrauben, damit auch nichts verrutscht. Zwei variable Spannböcke dienen dazu, das andere Holzbrett festzuspannen. Dazu kannst Du in zwei Bohrungen eingesteckt werden und die Bretter so waagerecht oder senkrecht spannen. Anschließend werden das Stirnloch im Boden als auch das Loch in der Seitenwand mit dem passenden Dübelbohrer gebohrt. Dieser Vorgang wird für alle vorgesehenen Dübellöcher wiederholt bis die gewünschte Anzahl an Dübellöchern vorhanden ist.
Du hast Fragen oder ein Problem? Unser Kundenservice kann Dir mit Sicherheit weiterhelfen: + 49 2655 51280
Nützliche Informationen und wöchentliche Tipps & Tricks rund ums Heimwerken von wolfcraft erhältst du hier:
/ wolfcraft.deutschland
/ wolfcraft_deutschland
www.pinterest....
/ wolfcraft_deutschland
Ich Besitze schon seit 1 Jahr diese Dübellehre.. werde mir noch eins zulegen damit ich nicht immer verschieben muss.. dübelleiste werde ich auch noch kaufen, die ist auch klasse
Die 80er Jahre haben angerufen und hätten gern ihr Baumarktvideo zurück.
Ich habe dieses Gerät gekauft, sobald es auf den Markt kam, in den 1970er Jahren, glaube ich. Es ist das beste und am häufigsten verwendete Gerät, das ich je gekauft habe.
I bought this device as soon as it came on the market, in the 1970s, I think. It's the best and most used device I've ever bought.
Vielen Dank für das tolle Feedback! :) Ganz liebe Grüße, dein wolfcraft Team
gerade gekauft dies, absolut fantastisch, vielen Dank für das Video.
Whoever designed this needs to take a little bow. Well done.
I like this clip alot; I have one of these contraptions and, although you get instructions, it's nice to all the uses you can put this jig to without referring to the paperwork all the time.
Herrlich gezeigt! Ich denke das ist viel leichter wie alle Dovetails. Ist es erhaeltlich uebersee, bestimmt. Ich bin ganz ueberzeigt und wqerde es versuchen, es ist so klar!
UNIVERKOM JE NAJBOLJI ,NAJJEDNOSTAVNIJI I NAJBRŽI !
Hallo, ich hätte eine Frage...wie wird dann eingestellt ob ich mit ein 16mm oder z.B 19mm Platten arbeite, da das Loch muss schon in der Mitte sein.
denn wenn ich 90-Grad-Paneele bohre, habe ich noch einen Schritt übrig: Ist das ein Defekt des Stücks, das ich gekauft habe? Vielen Dank
I read on Amazon and review on this jig, saying that L connections aren't flush all the time, and that they're off from 1/32 to 3/32nds of an inch.
When I bought this jig, and saw this video, I figured out things. One, it must be a pain to make L connections unless one has two drills. One small simple project, fine. But I've got 500 holes to drill in ten bookcases, most of which are L connections. Therefore, Changing the drill bit every time is not an agile option. I think I'd rather make my L connections the way you do T connections. That also may help with off-flush connections. I'll get back to you.
Die Vorlage ist sehr gut; aber es hat ein Problem, und das ist, dass es die Perforation nicht gut platziert lässt und die Position in L nicht bündig lässt.
Warum werden die Spitzen geändert, wenn die Paneele bei Verwendung von Stiften gleicher Größe um 90 Grad gebohrt werden?
Grazie
Das Arbeiten mit dem Universaldübler geht schnell und einfach weil er sich auf die Brettstärke vom Rand aus bezieht - hat also immer den gleichen Abstand von außen. So wird ein bündiger Abschluß sicher gestellt.
Soll aus Belastungsgründen der Dübel in die Mitte gesetzt werden, empfehlen wir den wolfcraft Meisterdübler.
Indeed, the video shows how the (8mm) dowel is off center at the head end of the plywood. In case of 18mm plywood a 6mm dowel (=18mm/3) should have been used and the off center position will cause a weak joint. Unfortunately I learned about your "Wofcraft Meisterdübler" when it was too late... Wolfcraft should have pointed this out on the product documentation instead of as an afterthought on UA-cam!!!
Nice video. Decided to buy one. However, none of the dowels lined up when I used it. Destined for the rubbish bin.
Wie bekommt man das Tool denn für verschiedene Holzstärken eingestellt? Geht das überhaupt? Der Dübel sitzt ja gar nicht mittig...
Ist tatsächlich so das die Dübellöcher nicht mittig zu liegen kommen! Funktioniert aber trotzdem einwandfrei und stellt sicher, dass die Bretter nicht 180 Grad verdreht ineinander gesteckt werden können.
Hola, ya lo estuve revisando mil veces, pero no se como se centran los orificios para madera de 16 mm. Gracias Saludos
Hola,
para espigas de madera de 6, 8 y 10 mm. Más información sobre el producto se puede encontrar aquí: www.wolfcraft.es/es/productos/p/maestros_de_espigado/1_set_universal_de_espigado_de_madera/s/p/index.html
Saludos, Elisa
Muebles INNOVA i .p
is it possible to make edge-to-edge with materials thickness of 36 mm, because in the specification maximum thickness is 1-1 / 4 ", which is a little less than 32 mm
muy bueno el dispositivo
This model is sold by Rockler in the US. Can we have an English version? Very nice video.
Bem projetada.beautiful
mit einem doppelten satz wolfcraft Universaldübler geht das einfacher
240p quality!?
I purchased this Item from Amazon and was not pleased with the item the joints didn't line up evenly.
I have pought this devie to do my kitchen cabiinets and I am seriouslydeceived. The demo shows small panels. It doesnt work that esys with the big ones.
The holes are to near to the edge and you cant adjust it. You need put something between wood and clamp to protect wood against clamp marks. It is relatively expensive for the job. Some cheaper toos do it probably better.
I purchased this tool at RONA hardware store in Canada (Quebec it is the place where I live) for little more than 60$ can.
Hi greg,
thank you for your enquiry. Please contact our colleagues in the technical service directly. They can best help you with questions about the product.
-> technical.service@wolfcraft.com
Thank you,
Your wolfcraft team
Die unverbindliche Preisempfehlung für das Set mit Dübelhilfe, 8er Bohrer mit Tiefenstop und 40 Stück 8er Holzdübel liegt bei 41,90 €. Das gerät ist aber auch für 6er und 10er Dübel verwendbar!
=por favor me puedes decir donde se compra en Colombia
¡Hola! Donde puedo encontrar esta magnifica herramienta en Chile
¡Hola! Gracias por su interés en nuestros productos. Desafortunadamente no tenemos distribuidor en Chile. Por favor, póngase en contacto con info@wolfcraft.com para obtener más información.
saludos cordiales
JKa
lo encuentra en mercado libre de Perú, se llama centrador para tarugos. Aqui dejo un link: articulo.mercadolibre.com.pe/MPE-431373504-centrador-para-tarugos-wolfcraft-_JM
Is there a version of this video in English?
All our english or international videos you can find in the english plalist of ouor channel. Unfortunately fir the mentioned ref. we do not have a video. If you contact customerservice@wolfcraft.com you can ask for our woodjointing compendium ref. 9952076 - or they send you a pdf. There you can get mor info about the mentioned product.
Hola, excelente vídeo, una magnífica herramienta pero quiero saber si con la mima puedo centrar orificios para piezas de madera mas gruesas es decir para espesor de 3mm. 4mm. o más. Me gustó mucho su herramienta y estoy muy interesado en ella pero necesito saber si me servirá para trabajos con piezas de madera mas gruesas, muchas gracias por su atención.
+Magin Hernández
Gracias por usar nuestro dowelmaster usted. Fue hecho para espesores de mesa de 12 - 30 mm.
(Thank you for using of our dowelmaster. It was made for board thicknesses from 12 - 30 mm.)
Best regards
JMA
Outil que je possède depuis plusieurs années dont je suis entièrement sastifait de par sa solidité métallique que par son efficacité pour les assemblages.
Im sure he says "ball licker" at 2:25
He says "Bohrlöcher", the german word for "drill holes".
Wie bekomme ich dieses produkt?
In welchem Land wollen Sie dieses Produkt erwerben? In vielen Ländern haben wir Fachhändler, die unsere Produkte vertreiben. Daneben gibt es diverse Online-Shops, die unsere Produkte verkaufen.
me gusta el dispositivo donde comprar en PERU ,cuanto cuesta?
lo encuentras en mercado libre de perú, se llama centrador para tarugos. aqui dejo un link: articulo.mercadolibre.com.pe/MPE-431373504-centrador-para-tarugos-wolfcraft-_JM
Dicono che col tempo i fori si allargano per via delle punte del trapano diventando un utensile impreciso.
Buongiorno, non ci risulta in quanto i fori hanno al loro interno una boccola metallica proprio per evitare che la punta del trapano consumi il materiale.
Il paraît qu'il y a des décalages dans les percages pour les panneaux de 18mm, est ce vrai ?
Bonjour ichthus,
Il se peut que le perçage ne soit pas centré sur le chant de la planche.
Mais cela n'a aucun impact sur la qualité de l'assemblage. Ce "décalage" sera identique sur l'autre pièce de bois.
Les deux planches seront donc bien affleurées ! :)
Bonjour Hassane,
Ce gabarit est l'idéal pour un assemblage simple par tourillons.
Il permet les assemblages en angle, en T et bord à bord.
A bientôt.
Sébastien.
does it have 7 mm hole for confirmat drill bit ?l
Dear Justin Jr, please contact info@wolfcraft.com for this information. Best wishes
how much does it cost?
No entendí ni madre..pero si me lo regalan ya lo sabré usar...jejeje
@hugo ricardo ortiz valdivia: Tenemos un distribuidor para Peru. Para mayor información, ventas o servicio al cliente, favor de contactarnos a JDelaCruz@mibro.com y customerservice@mibro.com
@lkazanov where I find?
universal dowelling set
Quanto costa?
Спросите в магазине или онлайн-заказ ...
Das ist überhaupt nicht neu, das habe ich schon sehr lange, und verwende es immer für Verbindungen mit Dübeln.
Hallo, das freut uns natürlich zu hören. Liebe Grüße, dein wolfcraft Team.
Pouvez vous l’indiquer si le commentaires est en français merci
Bonjour @Pierre yves Huon,
Malheureusement, cette vidéo n'est pas disponible en français. 😕
Navré !
Il lavoro finito non sembra a filo. Deluedente dimostrazione
non puo' esserlo: poiche' la "sporgenza" di alluminio ha uno spessore fisso, i fori saranno centrati per UN SOLO spessore del legno.
Non so come si faccia a concepire e commercializzare una stupidaggine del genere.
where we can get this in English ?
Sorry, right now there is no english version available. But we offer a picture gallery on our website: www.wolfcraft.com/en/products/p/dowel_connections/1_universal_dowelling_set/s/p/index.html
Por favor, póngase en contacto con, customerservice @wolfcraft. com. Allí, se puede llamar un distribuidor cerca de usted!
Имеет место быть
MOLTO DELUSO.....i fori non vengo al centro.
Peccato che i fori sono fissi...non vengono mai centrati...
the most idiot thing in the world: holes are centered for one (and only one!) thickness of wood panel.
Don't waste your money.
That's true, the holes are centered for only one thickness! But does it have to be in the center for all application?
There is an alternative: the "Meisterdübler" (from Wolfcraft too) or the JointPro (from Milescraft).
the term is idiotic, idiot. Don't like it. Don't buy it. Show me another one that will do 4 x 4 on center? I'll wait.
pinco pallo - From this site: "Handles stock ranging from 1/2" to 1-1/4". I've owned one for 20 years. Drilled dowel holes in all sizes of stock. You should search before making such a claim.
www.rockler.com/dowel-pro-jig