@@PromdeeezY I don’t know exactly which country you live , but if Amazon or EBay supports your country then you can order it from they official websites , or you can buy it from your local GameStop stores
Perfect, i'm creating a game room and can't use some of my older consoles, so was looking for this, also saw your WII converter to hdmi and bought one straight away.
Watched this video on an HDTV and based on the captured footage from the console - that black PS2 TO HDMI adapter certainly looks best to me The image is sharp enough, the resolution is pretty good, the picture doesn't come through as muddy or blurry as the other converters, and the colors seem fine as well, though obviously it's hard to judge how accurate they are to what the games are actually supposed to look like Obviously nothing will beat the more professional solutions like OSSC or Framemeister or other similar devices that cost hundreds of dollars but these do look good as a more budget limited investment into having a decent PS2 output on a non crt screen
Some results from my own testing: (Slim, Pal ps2, 42" HDTV, ) 1- Component cable direct to TV, I used this setup for a while and games that support 480p (eg. Outrun) looks ok, unfortunatley only a small amount of games in PS2 library support 480p 2- Cheap PS2 to HDMI solution (you listed this as your prefered solution) - slightly better than above, however this is really just passing the ps2 component output through HDMI 3- LevelHike PS2 cable- My prefered solution, takes the RGB (scart) signal and upscales to 720p, 60hz. A good solution for non-480p games, unfortunately with games that do have 480p support, you can't enable it , but they still look good and better than above solutions. The cable was budget friendly, ( around 30 Dollars) and imo outside of the crazy expensive retrotink solutions, the best solution for my setup.
Anything special about these retrotink soutions? I have a ps2 slim I just found in storage and I'm just looking for what would look best on an LG c2 oled
I also opted for the LevelHike but to use for my ps1. Looks way better and crisp on my tv since i was using av cables. Should also look better on the ps2.
THANKS!!! This video was just what i was looking for ...and THANK GOD I GOT THE RIGHT ONE!!! ...just put the order in today before i even seen this video!! Hope it looks good as what i saw in your video!!..... Your video was filled with AWESOME Info needed!!
_Congratulations for the content - Many years ago and the first channel on youtube that I see a comparison between 5 different adapters with - an image - of a static game - that is, without speed - In this we managed to - extract all the potential - and the maximum of information - I am very grateful for taking the time to acquire all these products - and to show us in practice how they all work - I use the Ps2 for HDMI - but I still want - to buy a Bitfunx - But my reality still doesn't allow it - This video of yours is a gem of knowledge - and clarifications - A big hug to all - Your content is wonderful ( Sorry - I use Google translator )_
@@NONAMECLOSETHEDOORI have a better question : WHY did you custom your text, it is horrible to read _I can do it too_ *In multiple different ways* -But don’t do it please-
I think why a lot of people got the Pound cable is because it supported PS1 and the settings they used were the ones that would support ps1 on ps2 so its not as sharp as it could be because they chose to be able to support PS1 functionality. That is where some the the expense comes from I think.
You are correct, the Adapters which support the PS1 convert the RGB Signal but Adapters which convert a YPBPR Signal have way better image quality on the PS2. The PS1 doesn't support YPBPR, only RGB and RGB has bad image quality.
@@derozaza You're probably thinking of CVBS (composite video), not RGB. RGB and YPbPr component are by and large equivalent. In the PS2, the YPbPr signal is converted from RGB (in the early PS2s this conversion was even done in the analog domain.) The RGB signal output by the PS is usually perfectly fine. 🙂 The CVBS output from both the PS and PS2 however is very soft as Sony put a trap filter in the luma signal to suppress cross-color artifacts, so any converter that uses that instead of RGB or YPbPr is bound to produce a very soft picture.
I purchased the "PS2 to HDMI" about 3 years ago and it's been a phenomenal solution, but there are a few cons I'd like to mention. If you're using free mcboot to upscale the signal the highest this adapter will pass is 1080i. The PlayStation 2 is capable of passing 1080p, I do it on component cables no problem, but this dongle will not process 1080p. The other con is that the positioning of the USB port doesn't allow for you to stand the PlayStation 2 upright. I really wish they would have put it on the other side, when using this dongle you are forced to lay the PS2 flat. Other than that I'm completely satisfied with the product and I am not looking for any other Solutions because this thing just simply works, and in my opinion the picture is the best especially when it comes to the colors. I use mine on a 4K television and an older 1080p television and it always looks amazing.
@@Basilisk4119 well I use both. I use component cables when the TV has them available but most HDTVs do not have component inputs. When an HDMI cable is the only thing available I will use the PS2 to HDMI adapter.
@@mark5150ty hey, I use the ps2 to HDMI piece and for some reason for one specific game there is no video, the disc reads but after it is launched no video pops up, is this a problem with the TV not supporting it or is it the ps2 to HDMI piece?
@@coleanderson8035 well this could be a number of problems. If the game is of a different region than your TV it will not display. If it's a pal region then the game is displayed in 50 HZ and if you were playing on a TV that is 60 HZ it will not display. If you are using free mcboot you can Force the game display at a different resolution then it's original. The PS2 HDMI adapter will pass any signal except for 1080p, so it is not at fault.
Duuude!!! I just got my PS2 to HDMI today. What a fantastic product. I'm lucky to be having an ideal experience with it. Oh and after reading many comments about the PS2toHDMI, it seems I'm the only one on earth able to also play PS1 games.
@Aimilios I know exactly what you mean. No, I didn't bought the "model G300" (the one that comes in that box). I bought one that came in a simple transparent plastic bag. The body/chassis is black plastic just like the one in this video. I've seen that many of these adapters have the audio jack made out of different materials and colors like metallic or black plastic, mine is yellow plastic (in case this helps you identify a particular version you are trying to find). I could list all the text that is in the sticker on the plastic bag if that helps you too somehow.
@@aimilios5972 So, here is the text (as is) that comes on the sticker on the plastic bag: Q X - S H - P C - 9 8 2 [215/500] ps2 hdmi 1m1202203041134315821jjx | 22-03-08-12 13N2523
From my experience this is the best way to play PS2. I use GSM with component cables and a Portta component to HDMI adapter for a totally interference free experience :)
The bitfunx one works with GSM, 1080i, 720p, 480p resolutions fine. Some Ps2toHDMI has variations wich not work for progressive resolutuions and GSM. Funny thing, my bitfunx has not the green tint shown in the video... very strange...
*I bought the convertor that you liked the most (PS2 to HDMI) but mine doesn't look anywhere near as good as yours. Mine is considerably WORSE than composite. It's unusable. I have two tvs and two PS2s, so I compared them side by side. So even though they have the exact same outer shell, there's better and worse PS2 to HDMI convertors😫* *Can you pop yours open and tell me what version it is? It'll say it on the circuit board. Mine is V4 built in 2020/08/19. I wonder if yours is a later version.*
Thank you so much for this review, this video is exactly what I was looking for. It took me only one purchase to get a great converter for a dreamcast but I didn't have such luck with the ps2 but now i know what I should get. Thanks a bunch!
To me, black ps2hdmi adapter is, unsurprisingly, best for PS2 while Bitfunx is rockin for PS1. Sadly, it is God-awful for PS2 with its washed colors and ghosting and visible scanlines. I actually doubted myself if this was RGB/YPbPr displayed or just plain composite like in the yellow dongle. My guess is, PS1 RGB at 240p looks better upscaled (or rather, can't be passed through HDMI at all without upscaling) while PS2 component at 480p/576i is still good as is so upscaling is redundant and bad for the picture. I'll need a way to make the two into a hodgepodge Y-adapter so I could plug HDMI into one for PS1 and into other for PS2.
Commenting again, a little bit later in the video actually just get my opinion in here but I actually like the look of an imperfect HDI picture, I actually like it to be a little bit soft because not only I think it hides the sharp edges of pixels, but it gives it like a little bit of a retro look. I plan on streaming PS2 games in future with a PS2 console for the experience and I think a perfect image makes it seem artificial like it’s being emulated on a PC and I don’t want that I want an imperfect image for the authentic experience
This is a simple question. Why not still use your component cable, and use a component to HDMI adapter for the upscale? I believe that would be the best way to go, but you are limited to 480i output from the PS2, so no PS1 games.
Hello, the advantage of the dongle is that it captures the signal directly out of the console is therefore not affected by the quality of a cable, analogy as good as it is, the bass reflection is good, but very expensive which would put off 90 percent of people.
I don't see the blur as inherently bad, in fact the footage of the PS2 to HDMI looks very aliased. Sure it's the most raw clear image, but that also means pixellation up the ass in these low resolutions without a CRT. I think freemcboot can do upscale so it would be it interesting to compare
So I just purchased one of these got everything hooked up sound is going to the tv but will not come out of my pcm wire to the receiver!!! 😡😡😡😡. Any suggestions everything else is working
The pound is great if you combine it with either the mclassic or mcable. I actually opted for this combo over my retrotink cus my mclassic doesn't play well with it, constant screen Flicker no matter what when combined. The retrotink I still use for my ps1.
The BEST option is to run it to your TV or monitor thru an 4K/8K upscaler paired with a set of high-quality HDMI cables, and then output the signal at whatever resolution suits you... Of course, that will be more costly but definitely worth it in the long run cuz oftentimes they will also give more BOOST to the video signal and even provide extra additional inputs/outputs for your other game consoles and AV devices!
Yeah but first of all an upscaler like that costs A LOOOOOOOT, like 300$, if not more, and not all of them are simple to configure, OSSC costs a lot and requires TONS AND TONS of configuration, new Retrothink scaler doesn't require nearly even half as much configuration as OSSC but sometimes can even costs twice as much, and all other options are only for those few chosen ones who can spend thousands of dollars to simply have a slightly less pixels on Kratos nipples in GoW 2, is isn't really any good solution because a good solution is both effective and not UNGODLY expensive
The video implied that it would happen at least with the component signal, as he was talking about using progressive scan. However, I would guess it happens with both modes. I don't exactly have the deeper technical knowhow and vocabulary to explain it, but something similar to this can happen with a scaler called GBS-C if you set color sampling too high (4X), the picture receives a greenish tint on PS2. Different amounts of color sampling are more preferable for different systems. It's probably something related to that, except a basic adapter like this has all the more minor stuff like that hard set.
Ps2 to Hdmi is really good and cheap but god i wish they make revision on the design especially with the small usb power position or maybe make new one without power input
Sir I have ps2 of old model since 15 years passed but now not working. Says to upgrade it by memory or stick. What to do Sir pls advise giving an informative vedio
I have no idea what can be the problem at this point. You say something about Memory Stick upgrade ? If you can give me more information maybe we can figure it out. For questions join us on Discord - discord.com/invite/dmax9cvjPU
Hi, I'm using the yellow one but the image output has 3 colors only. Almost black and white. Can you help me on how to resolve this. I could see all of your outputs are colored but mine has only 3 color output
Ive purchased a old flat tv, but a very old one, with scart, Chinch, S-Video, HDMI and component ports, then ive bought a normal scart cabel for my ps2, and the picture looks absolutely good, better then on a original crt tv in my opinion. But youll need a old flat tv, with the old ports.
It's all very confusing. I like what I see at 5:30 but the reviews are mixed. It seems to not work on some tv's, and for others it works for a few days or a few weeks then the screen turns green. I had to repurchase a ps2 to play my old games and assumed the "slim" was more modern and had hdmi output. For $8 it's worth the risk and many said it's the same or better than one's that cost $30 and up. Your video proves this.
Thank you very much for giving me some advice. I guess I’m planning on streaming PlayStation two games and future from a PlayStation two console. Thanks mush appreciated
Hey man I love your content & I’ve got the PS2 HDMI adapter on the way now I don’t know how good the quality will be on the two that I have ordered but I guess I should let you know. I’m having trouble figuring out which one of the Mc boot items I should order
What capture card do you use in this video? I have Bitfunx upscaler, but the picture is awful and colours all are greeny, not so bright and delightful as in the video
I’m trying to choose an converter that shows the video immediately For example, I had the ps2 to hdmi and when I turn on the ps2, there’s a bit of a delay to show the entire startup Do other converters do the same
So with these do you need a PC at all ? Or do all of these work straight from the PS2 to a TV? Using a PS2 Slim and LGC1 OLED TV - would like to get the best quality available.
I'm going to pair the black PS2 to HD adapter that plugs into the back of the PS2 with my mClassic. The converter should convert to either 480p or 720p, and then the mClassic should upscale that to 1080p. Can't wait to see what the results look like.
PlayStation 2 is the best gaming console until now, just imagine, there a lot of good games that you can play, good stories on different genres. What an awesome console, plus backward compatible and it can turn into dvd player
I have both a 39001 fat and a 77001 slim but mainly looking for one for my 39001. The only issue I have is when it comes to PS1 games working. I have the composite cable and a 13 inch CRT TV but I really prefer a somewhat bigger screen so looking to get something for my HDTV. I need to keep games in 4.3 and be able to play PS1 games on it which I think could be an issue with 240i resolution. I could just get a converter thing for compostie to HDMI since I have the composite but that's just taking the worst signal and blowing it up on a larger screen with no deinterlacing or whatever. Component I tired before and was good image though the cheap cable was not. My current TV doesn't have Component slots so maybe could get a component cable to HDMI adapter and a component cable. I think I still have the old component cable but it's a cheap made and makes a loud buzzing sound on the TV speaker audio. I also have an mClassic which would be cool to use for removing jagged edges but I think it only works on 720p outputs. I do have a backwards compatible PS3 CECHA01 model but I just want to play on original hardware again. Wish I had a good size CRT TV but no room for one right now.
I have a PS2 to HDMI that looks identical to the one you say is the best. The package says it's model: G300. It works great on my TV but if I try to connect it to my Elgato HD 60 S, the sound doesn't work properly. I've tried the different settings and can't seem to fix the issue. Any idea as to what is happening here? Thanks.
I got a Linkfor cable for mine. But went back to the RGB cable since the TV I have it connected to still supports RGB plugs. Plus the RGB to HDMI I was using didn't like PS1 games.
I have one of bitfunx’s ps2-hdmi adapters, specifically one that doesn’t work with the ps1. When I use it with my ps2, there’s more blank space at the top than the bottom, and none of my Roku tv’s zoom settings resolve the issue. Do you know if the mclassic corrects this issue?
@@ristiristi I was curious about the lag. Coming from the FGC, there have been many solutions proposed over the years. From deinterlacing devices, to scalers, line doublers etc... and one of the main things we look for is a low latency solution. I had even purchased a few display lag measuring devices to see if it's within my threshold of tolerance. And was wondering if any of these devices have had their output measured with such devices.
Thanks bro!👍👍 I've been trying to improve the graphics I use PlayStation2 and the Dell monitor but the av2hdmi from Best buy is horrible cant even play NFS crash into everything..😅 definitely gonna try the ps2 to hdmi👌
I tried ps2 to hdmi on a sony bravia 3D tv the image is stable in the games menu while when the game starts the image goes up and down. Striped false resolution. I made the return now I try the component cable.
Hello, great video, will any of these solve my PS 2 issue with a game in a dark background scene? Like playing games that are in dark tunnels or at night which you cannot see anything at all. I had no issues on my old plasma tv. I have a 75 inch LG Led tv, not sure if that matters and did put into game mode for the picture with no difference. Your thoughts, many thanks.😊
The Update Video For 2024 .. Find Here !
ua-cam.com/video/4V-jjzQBmJY/v-deo.html
The “PS2 To HDMI” still is a winner!
How can I find that brand
@@PromdeeezY I don’t know exactly which country you live , but if Amazon or EBay supports your country then you can order it from they official websites , or you can buy it from your local GameStop stores
I think buying online is the best option because I looked in all the stores in my area and can't find it
Great video. PS2 is becoming very popular again in 2022.
Fr
because games become trash or pay2Win m Bullshit
That’s where all the good games are
I dug out my Star Wars games, man it takes u back to being a kid 🥹
tenkaichi budokai is the goat
Great video. PS2 is becoming very popular again in 2023.
As far as I know there is a LOT of "PS2 to HDMI Dongle" clones/knock-offs, it would be helpful to know a trusted brand or seller
I saw one on ebay and I think it's the right one because of the reviews but idk for certain
Did you ever find a reputable seller on Amazon or similar marketplace?
I’ve heard really good things about kaico
Perfect, i'm creating a game room and can't use some of my older consoles, so was looking for this, also saw your WII converter to hdmi and bought one straight away.
Wow I didn't know there were so many PS2 to HDMI solutions! Good reviews and cool video Wicked!👍
Watched this video on an HDTV and based on the captured footage from the console - that black PS2 TO HDMI adapter certainly looks best to me
The image is sharp enough, the resolution is pretty good, the picture doesn't come through as muddy or blurry as the other converters, and the colors seem fine as well, though obviously it's hard to judge how accurate they are to what the games are actually supposed to look like
Obviously nothing will beat the more professional solutions like OSSC or Framemeister or other similar devices that cost hundreds of dollars but these do look good as a more budget limited investment into having a decent PS2 output on a non crt screen
Some results from my own testing: (Slim, Pal ps2, 42" HDTV, )
1- Component cable direct to TV, I used this setup for a while and games that support 480p (eg. Outrun) looks ok, unfortunatley only a small amount of games in PS2 library support 480p
2- Cheap PS2 to HDMI solution (you listed this as your prefered solution) - slightly better than above, however this is really just passing the ps2 component output through HDMI
3- LevelHike PS2 cable- My prefered solution, takes the RGB (scart) signal and upscales to 720p, 60hz. A good solution for non-480p games, unfortunately with games that do have 480p support, you can't enable it , but they still look good and better than above solutions.
The cable was budget friendly, ( around 30 Dollars) and imo outside of the crazy expensive retrotink solutions, the best solution for my setup.
Just use GSM to output most of the games at 480p
Thanks for review
Anything special about these retrotink soutions? I have a ps2 slim I just found in storage and I'm just looking for what would look best on an LG c2 oled
I also opted for the LevelHike but to use for my ps1. Looks way better and crisp on my tv since i was using av cables. Should also look better on the ps2.
Hi what is the name of the adapter you are using
THANKS!!!
This video was just what i was looking for ...and THANK GOD I GOT THE RIGHT ONE!!! ...just put the order in today before i even seen this video!!
Hope it looks good as what i saw in your video!!.....
Your video was filled with AWESOME Info needed!!
Which one did you get
@@GunGai I got the >> LEVELHIKE
_Congratulations for the content - Many years ago and the first channel on youtube that I see a comparison between 5 different adapters with - an image - of a static game - that is, without speed - In this we managed to - extract all the potential - and the maximum of information - I am very grateful for taking the time to acquire all these products - and to show us in practice how they all work - I use the Ps2 for HDMI - but I still want - to buy a Bitfunx - But my reality still doesn't allow it - This video of yours is a gem of knowledge - and clarifications - A big hug to all - Your content is wonderful ( Sorry - I use Google translator )_
How did you custom your text?
@@NONAMECLOSETHEDOOR Just wrap your text in undescores (_). _It's Cool!_
@@NONAMECLOSETHEDOORI have a better question : WHY did you custom your text, it is horrible to read
_I can do it too_
*In multiple different ways*
-But don’t do it please-
I think why a lot of people got the Pound cable is because it supported PS1 and the settings they used were the ones that would support ps1 on ps2 so its not as sharp as it could be because they chose to be able to support PS1 functionality. That is where some the the expense comes from I think.
They went with across the board pricing on their converters
I prefer the Hyperkin cable
You are correct, the Adapters which support the PS1 convert the RGB Signal but Adapters which convert a YPBPR Signal have way better image quality on the PS2. The PS1 doesn't support YPBPR, only RGB and RGB has bad image quality.
@@derozaza You're probably thinking of CVBS (composite video), not RGB. RGB and YPbPr component are by and large equivalent. In the PS2, the YPbPr signal is converted from RGB (in the early PS2s this conversion was even done in the analog domain.) The RGB signal output by the PS is usually perfectly fine. 🙂
The CVBS output from both the PS and PS2 however is very soft as Sony put a trap filter in the luma signal to suppress cross-color artifacts, so any converter that uses that instead of RGB or YPbPr is bound to produce a very soft picture.
Great video. PS2 is becoming very popular again in 2024.
I have some ps2 vids coming up for 2024 😄
I purchased the "PS2 to HDMI" about 3 years ago and it's been a phenomenal solution, but there are a few cons I'd like to mention. If you're using free mcboot to upscale the signal the highest this adapter will pass is 1080i. The PlayStation 2 is capable of passing 1080p, I do it on component cables no problem, but this dongle will not process 1080p. The other con is that the positioning of the USB port doesn't allow for you to stand the PlayStation 2 upright. I really wish they would have put it on the other side, when using this dongle you are forced to lay the PS2 flat. Other than that I'm completely satisfied with the product and I am not looking for any other Solutions because this thing just simply works, and in my opinion the picture is the best especially when it comes to the colors. I use mine on a 4K television and an older 1080p television and it always looks amazing.
So when you're playing PS2 on a large HDTV would you go with the PS2 to HDMI dongle or would you go with component cables?
@@Basilisk4119 well I use both. I use component cables when the TV has them available but most HDTVs do not have component inputs. When an HDMI cable is the only thing available I will use the PS2 to HDMI adapter.
@@mark5150ty 👍
@@mark5150ty hey, I use the ps2 to HDMI piece and for some reason for one specific game there is no video, the disc reads but after it is launched no video pops up, is this a problem with the TV not supporting it or is it the ps2 to HDMI piece?
@@coleanderson8035 well this could be a number of problems. If the game is of a different region than your TV it will not display. If it's a pal region then the game is displayed in 50 HZ and if you were playing on a TV that is 60 HZ it will not display. If you are using free mcboot you can Force the game display at a different resolution then it's original. The PS2 HDMI adapter will pass any signal except for 1080p, so it is not at fault.
PS2 to HDMI wins. Not to mention you get an audio output so I can run it into my studio monitors.
Thank you for the info! The cheap one is underrated and I love it!
I just watched ur video now and it was wat av been looking for bro..... thanks champ
Duuude!!! I just got my PS2 to HDMI today. What a fantastic product. I'm lucky to be having an ideal experience with it.
Oh and after reading many comments about the PS2toHDMI, it seems I'm the only one on earth able to also play PS1 games.
The box of the adaptor you bought was was blue and had something like the windows logo on it?
@Aimilios I know exactly what you mean. No, I didn't bought the "model G300" (the one that comes in that box). I bought one that came in a simple transparent plastic bag. The body/chassis is black plastic just like the one in this video. I've seen that many of these adapters have the audio jack made out of different materials and colors like metallic or black plastic, mine is yellow plastic (in case this helps you identify a particular version you are trying to find). I could list all the text that is in the sticker on the plastic bag if that helps you too somehow.
@@holgerwikingsen713 this would help me a lot, I'm just trying to find the best solution, thank you very much!
@@aimilios5972 So, here is the text (as is) that comes on the sticker on the plastic bag:
Q X - S H - P C - 9 8 2
[215/500] ps2 hdmi
1m1202203041134315821jjx | 22-03-08-12
13N2523
@@holgerwikingsen713 thank you i really appreciate it
Great video! Wish you can make a comparison but using the GSM homebrew scaler or the GSM built in OPL, in combination with these hdmi solutions.
From my experience this is the best way to play PS2. I use GSM with component cables and a Portta component to HDMI adapter for a totally interference free experience :)
The bitfunx one works with GSM, 1080i, 720p, 480p resolutions fine. Some Ps2toHDMI has variations wich not work for progressive resolutuions and GSM. Funny thing, my bitfunx has not the green tint shown in the video... very strange...
4:40 ive had that thing for years. Its so good. its also cheap as hell
Do you have a link?
@@_zed I recently purchased this it's called keico PS2 to HDMI
How about darkness issues? I can’t play games like TS2 or Burnout Revenge or Resident Evil Outbreaks videos are EXTREMELY DARK.
On "My Life in Gaming" channel PS2 to HDMI has two different model, the supperior model is support 240p signal so it works for PS1 too.
Yup, I have two of those I ordered from different sellers, both work fine on PS1 and PS2.
Came here looking for HDMI solutions and left wanting to know what racing game that is with the yellow car. Looks really fun.
Need for speed >>>
Smooth drifts in the first clip 👌
*I bought the convertor that you liked the most (PS2 to HDMI) but mine doesn't look anywhere near as good as yours. Mine is considerably WORSE than composite. It's unusable. I have two tvs and two PS2s, so I compared them side by side. So even though they have the exact same outer shell, there's better and worse PS2 to HDMI convertors😫*
*Can you pop yours open and tell me what version it is? It'll say it on the circuit board. Mine is V4 built in 2020/08/19. I wonder if yours is a later version.*
probably got the market and then chucked cheap components in the newer builds.
@@buggerlugz6753 Yeah, I think you're right
Did you ever find a good PS2 to HDMI converter?
Thanks for this video. I have seen a lot of these reviewed by other youtubers but I trust your opinion the most.
Thank you so much for this review, this video is exactly what I was looking for. It took me only one purchase to get a great converter for a dreamcast but I didn't have such luck with the ps2 but now i know what I should get. Thanks a bunch!
Why don't you buy any YPbPr to HDMI adapter?
To me, black ps2hdmi adapter is, unsurprisingly, best for PS2 while Bitfunx is rockin for PS1. Sadly, it is God-awful for PS2 with its washed colors and ghosting and visible scanlines. I actually doubted myself if this was RGB/YPbPr displayed or just plain composite like in the yellow dongle. My guess is, PS1 RGB at 240p looks better upscaled (or rather, can't be passed through HDMI at all without upscaling) while PS2 component at 480p/576i is still good as is so upscaling is redundant and bad for the picture. I'll need a way to make the two into a hodgepodge Y-adapter so I could plug HDMI into one for PS1 and into other for PS2.
Very comprehensive and helpful, made my purchase according to this video.
The cheap best one did not work on 43inch tv, is that true?
Absolutely great video and the ps2s in the beginning are so gorgeous that light blue one is mint
Commenting again, a little bit later in the video actually just get my opinion in here but I actually like the look of an imperfect HDI picture, I actually like it to be a little bit soft because not only I think it hides the sharp edges of pixels, but it gives it like a little bit of a retro look. I plan on streaming PS2 games in future with a PS2 console for the experience and I think a perfect image makes it seem artificial like it’s being emulated on a PC and I don’t want that I want an imperfect image for the authentic experience
This is a simple question. Why not still use your component cable, and use a component to HDMI adapter for the upscale? I believe that would be the best way to go, but you are limited to 480i output from the PS2, so no PS1 games.
Hello, the advantage of the dongle is that it captures the signal directly out of the console is therefore not affected by the quality of a cable, analogy as good as it is, the bass reflection is good, but very expensive which would put off 90 percent of people.
so do all these adapters upscale the signal or just output 480p?
I like the pound option.
Does the cheap PS2 TO HDMI dongle support PS1 games played on PS2?
I don't see the blur as inherently bad, in fact the footage of the PS2 to HDMI looks very aliased. Sure it's the most raw clear image, but that also means pixellation up the ass in these low resolutions without a CRT. I think freemcboot can do upscale so it would be it interesting to compare
So I just purchased one of these got everything hooked up sound is going to the tv but will not come out of my pcm wire to the receiver!!! 😡😡😡😡. Any suggestions everything else is working
The pound is great if you combine it with either the mclassic or mcable. I actually opted for this combo over my retrotink cus my mclassic doesn't play well with it, constant screen Flicker no matter what when combined. The retrotink I still use for my ps1.
The BEST option is to run it to your TV or monitor thru an 4K/8K upscaler paired with a set of high-quality HDMI cables, and then output the signal at whatever resolution suits you... Of course, that will be more costly but definitely worth it in the long run cuz oftentimes they will also give more BOOST to the video signal and even provide extra additional inputs/outputs for your other game consoles and AV devices!
Yeah but first of all an upscaler like that costs A LOOOOOOOT, like 300$, if not more, and not all of them are simple to configure, OSSC costs a lot and requires TONS AND TONS of configuration, new Retrothink scaler doesn't require nearly even half as much configuration as OSSC but sometimes can even costs twice as much, and all other options are only for those few chosen ones who can spend thousands of dollars to simply have a slightly less pixels on Kratos nipples in GoW 2, is isn't really any good solution because a good solution is both effective and not UNGODLY expensive
ossc isn't perfect tho
Makes sense for the 4k, my tv in my room isn't, which has the ps2 to hdmi make the screen look too pixely
@@BalboaGoku Good call... It always makes sense to future-proof your favorite classic games consoles!
@@OtomoTenzi yeah, but it's a good thing my dad's tv downstairs is 4k! Not much room, but I'll see what I can do.
12:30 the "phat" PS2 DOES have component support. Just wanted to get this out there, so people don't get confused
Is that guaranteed? I'm considering buying this one for my console
Love ur back catalog❤
Which one is best for ps2 slim?
As for the Bitfunx solution, is the greenish video output the result from the RGB mode or the YPbPr mode? Or is it from both?
The video implied that it would happen at least with the component signal, as he was talking about using progressive scan.
However, I would guess it happens with both modes. I don't exactly have the deeper technical knowhow and vocabulary to explain it, but something similar to this can happen with a scaler called GBS-C if you set color sampling too high (4X), the picture receives a greenish tint on PS2. Different amounts of color sampling are more preferable for different systems.
It's probably something related to that, except a basic adapter like this has all the more minor stuff like that hard set.
Ps2 to Hdmi is really good and cheap but god i wish they make revision on the design especially with the small usb power position or maybe make new one without power input
yes that would be so cool that they make a better updated version 😳
Yep, it can't be that difficult to redesign these dongles so they can sit flush with the PS2
Just ordered the ps2 to hdmi hope it works better than the regular cables! My image is so blurry haha
My ps2 is playing but in black and white. Anybody know how to fix this?
Sir I have ps2 of old model since 15 years passed but now not working. Says to upgrade it by memory or stick. What to do Sir pls advise giving an informative vedio
I have no idea what can be the problem at this point.
You say something about Memory Stick upgrade ?
If you can give me more information maybe we can figure it out.
For questions join us on Discord - discord.com/invite/dmax9cvjPU
Great video man. Wish I had watched it before buying a piece of crap adapter!
Hi, I'm using the yellow one but the image output has 3 colors only. Almost black and white. Can you help me on how to resolve this. I could see all of your outputs are colored but mine has only 3 color output
i’m about to grab a ps2 this tomorrow and i got some games on the way!
Ive purchased a old flat tv, but a very old one, with scart, Chinch, S-Video, HDMI and component ports, then ive bought a normal scart cabel for my ps2, and the picture looks absolutely good, better then on a original crt tv in my opinion. But youll need a old flat tv, with the old ports.
With you mentioning the ps2 to hdmi doesn't support RGB output and will just get a black screen, does that mean it's doesn't work for all ps2
Bought the ps2 to hdmi and I hope it clears up the blurry gameplay I have experienced on my 65 inch 4K tv
My TV had Component in it source but when i check the port there is no Green and Blue port , only red - yellow - white - red .. idk why
It's all very confusing. I like what I see at 5:30 but the reviews are mixed. It seems to not work on some tv's, and for others it works for a few days or a few weeks then the screen turns green. I had to repurchase a ps2 to play my old games and assumed the "slim" was more modern and had hdmi output. For $8 it's worth the risk and many said it's the same or better than one's that cost $30 and up. Your video proves this.
Thank you very much for giving me some advice. I guess I’m planning on streaming PlayStation two games and future from a PlayStation two console. Thanks mush appreciated
Hey man I love your content & I’ve got the PS2 HDMI adapter on the way now I don’t know how good the quality will be on the two that I have ordered but I guess I should let you know.
I’m having trouble figuring out which one of the Mc boot items I should order
Am I missing something? Why did you gloss over the usb cable requirement for the PS2 to HDMI adapter?
I have the original PS2 (fat version) can i use the PS2 to HDMI adapter?
Yes it works for me. Love it
What capture card do you use in this video? I have Bitfunx upscaler, but the picture is awful and colours all are greeny, not so bright and delightful as in the video
It's still very very dark ? Is there no way to make it more bright ?
But to compare with CRT, can HDMI dongle compete, or nothing can beat good old TV with nice scanlines?
Well you said it, nothing compares to ctr. Been trying to get a Sony Trinitron but no luck.
I want the best HDMI adapter to use with mclassic ,, I have the ps2 to hdmi and it is not working with mclassic 😢
I’m trying to choose an converter that shows the video immediately
For example, I had the ps2 to hdmi and when I turn on the ps2, there’s a bit of a delay to show the entire startup
Do other converters do the same
Thanks very much for this video :) can the PS2 to HDMI handle PS1 games on the PS2 ?
So with these do you need a PC at all ? Or do all of these work straight from the PS2 to a TV?
Using a PS2 Slim and LGC1 OLED TV - would like to get the best quality available.
I'm going to pair the black PS2 to HD adapter that plugs into the back of the PS2 with my mClassic. The converter should convert to either 480p or 720p, and then the mClassic should upscale that to 1080p. Can't wait to see what the results look like.
Let me know how it goes. I have an mClassic as well hooked up to my PS3.
@@poopikins it actually looks a lot better. I think a backwards compatible PS3 would be better, but I can’t shell out the $250 for one right now.
If I use the bitfunx one will I be able to play ps1 games as well
PlayStation 2 is the best gaming console until now, just imagine, there a lot of good games that you can play, good stories on different genres. What an awesome console, plus backward compatible and it can turn into dvd player
Will it work if I use my computer screen as a method to get the video of the ps2 up on the screen?
In your opinion, which is the best? because call of duty 3 is extremely dark and there is no option to increase brightness within the game.
I have both a 39001 fat and a 77001 slim but mainly looking for one for my 39001. The only issue I have is when it comes to PS1 games working. I have the composite cable and a 13 inch CRT TV but I really prefer a somewhat bigger screen so looking to get something for my HDTV. I need to keep games in 4.3 and be able to play PS1 games on it which I think could be an issue with 240i resolution.
I could just get a converter thing for compostie to HDMI since I have the composite but that's just taking the worst signal and blowing it up on a larger screen with no deinterlacing or whatever.
Component I tired before and was good image though the cheap cable was not. My current TV doesn't have Component slots so maybe could get a component cable to HDMI adapter and a component cable. I think I still have the old component cable but it's a cheap made and makes a loud buzzing sound on the TV speaker audio.
I also have an mClassic which would be cool to use for removing jagged edges but I think it only works on 720p outputs. I do have a backwards compatible PS3 CECHA01 model but I just want to play on original hardware again. Wish I had a good size CRT TV but no room for one right now.
I'm looking for the component cable for my ps3 ,my PS3 HDMI Port is bad
What is the best one for PS2 to look good on an oled TV? I just want the graphics to look better and I don't care about anything else
Which P2 console version (fat, slim,square)best to buy ?
I have a PS2 to HDMI that looks identical to the one you say is the best. The package says it's model: G300. It works great on my TV but if I try to connect it to my Elgato HD 60 S, the sound doesn't work properly. I've tried the different settings and can't seem to fix the issue. Any idea as to what is happening here?
Thanks.
I have the same issue with my Wii using HDMI or component into elgato
It seems like the "PS2 to HDMI" dongle does not work on my PS2 Slim. I have tried to change the settings from RGB to YPbPr but still not working.
Maybe your usb ports are dead
@@Weensx USB? You mean HDMI. Either way, I got it to work. There was something wrong with the HDMI cable I used.
USB должен быть исправным тоже
so what's better? ps2hdmi or bitfunx?
So which one is the best for the black fat ps2. Thx
So out of all 5 which do you think is best
What about the Levelhike cable?
thanks for testing and share with us
Ps2 to hdmi is it working on ps2 slim?
I have one for my slim and it works like a charm, just make sure you change the video output to component on the ps2 before pluging it in
Id like to know the PS2 to HDMI do you need to plug in a speaker on the dongle to get sound or the sound would still default through he TV?
Hi, The adapter PS2 TO HD utilizes the RGB or YPBPR signal?
I got a Linkfor cable for mine. But went back to the RGB cable since the TV I have it connected to still supports RGB plugs. Plus the RGB to HDMI I was using didn't like PS1 games.
will this work on an original ps2 or only with the ps2 slim?
I have one of bitfunx’s ps2-hdmi adapters, specifically one that doesn’t work with the ps1. When I use it with my ps2, there’s more blank space at the top than the bottom, and none of my Roku tv’s zoom settings resolve the issue. Do you know if the mclassic corrects this issue?
Will thos fix the glitch on screen and I'm getting that on my flat screen
Thanks for the review, but I do have a question. What about lag using these type of devices? Is it as bad as other reviews say it is?
I have one of this devices and it's working fine
@@ristiristi I was curious about the lag. Coming from the FGC, there have been many solutions proposed over the years. From deinterlacing devices, to scalers, line doublers etc... and one of the main things we look for is a low latency solution. I had even purchased a few display lag measuring devices to see if it's within my threshold of tolerance. And was wondering if any of these devices have had their output measured with such devices.
I have the hdmi to ps2 adapter and the games are kinda shaking I have a gigabyte m28u 4k monitor what can I do?
Bro. Which racing game is that? I like it.
Thanks bro!👍👍 I've been trying to improve the graphics I use PlayStation2 and the Dell monitor but the av2hdmi from Best buy is horrible cant even play NFS crash into everything..😅 definitely gonna try the ps2 to hdmi👌
2:12 is this yellow 4:53 this on ?????
Does it fix the delays while playing? Especially guitar hero 2?
I tried ps2 to hdmi on a sony bravia 3D tv the image is stable in the games menu while when the game starts the image goes up and down. Striped false resolution. I made the return now I try the component cable.
Hello, great video, will any of these solve my PS 2 issue with a game in a dark background scene? Like playing games that are in dark tunnels or at night which you cannot see anything at all. I had no issues on my old plasma tv. I have a 75 inch LG Led tv, not sure if that matters and did put into game mode for the picture with no difference. Your thoughts, many thanks.😊
Does anyone notice that he is getting better at outrun everytime he shows it lol