Thank you for the video . Sir Which spary you had suggested in video. Please make a video regarding cleaning and maintenance of sockets and wiring also.
Hello Sir, The high beam light stopped working (both L and R) on my Gypsy. Im using the stock headlamps with no modifications. Can you please guide me in resolving the issue. (Low beam is working fine) Thanks!
Namasthe Sir, Thank you very much for this video. I'm noticing an issue with my Gypsy. I replaced the 15A fuse which is for the parking light (tail lamp) and dashboard light (near the speedometer). Afrer replacing the fuse, I see that that tail lamp is working fine. But, on the dashboard I see a dim light which will be always-on without turning on the combination-switch and without turning on the key and this is draining the battery. Kindly suggest what needs to be done. I have removed the fuse to avoid any further draining. Thanks in advance.
@@easyenginegypsy4703 thank you very much for your reply, Sir. The combination switch is new one. I had replaced it very recently. As you said, there might be some issue with the connection. Thanks again for your suggestion. Dhanyavaad.
Cut existence wiring make new wiring as uploaded video head light tell light wiring OR check operating switch OR check relay if there OR check bulb OR check for loose contact OR check proper Ground etc……
I have working 3 relays near ECM. And also, my battery is new (1 week old) But something is draining my battery. I have checked all wirings but found no fault What may be the problem? Faulty ECM or?
No not ECM after ignition switch off, only battery supply connected with head lights tel lights and horn and 4 switch indicator cut supply of that one by one for check of problem of drain of battery if something found cut that wiring permanently and preper sepret home made Owen wiring by use branded wire and proper joints fuse use also relay all ready wiring video uploaded on channel for horn head lights
My gypsy euro 2 Relay use to get heat up soon. So is it normal? If not how to solve it?
Check for loose connection and replacement of relay
Sir meine sv kuch check krwa deaa fr bhi heatup hori haiii relay
Thank you for the video . Sir Which spary you had suggested in video.
Please make a video regarding cleaning and maintenance of sockets and wiring also.
Ok , contact cleaner klineit
How to fit 40 watt LED headlights on gypsy
Hello Sir,
The high beam light stopped working (both L and R) on my Gypsy. Im using the stock headlamps with no modifications. Can you please guide me in resolving the issue.
(Low beam is working fine)
Thanks!
Made new wiring of head light by using excesting switch. Well I will upload video so you can do
Dhanyavad Sir
Good information dear 🙏🏼🙏🏼
Namasthe Sir,
Thank you very much for this video.
I'm noticing an issue with my Gypsy. I replaced the 15A fuse which is for the parking light (tail lamp) and dashboard light (near the speedometer).
Afrer replacing the fuse, I see that that tail lamp is working fine. But, on the dashboard I see a dim light which will be always-on without turning on the combination-switch and without turning on the key and this is draining the battery. Kindly suggest what needs to be done. I have removed the fuse to avoid any further draining.
Thanks in advance.
@@easyenginegypsy4703 thank you very much for your reply, Sir.
The combination switch is new one. I had replaced it very recently. As you said, there might be some issue with the connection. Thanks again for your suggestion. Dhanyavaad.
Sir maruti zen 97 model me ..starter relay or fuel pump relay ki location kya hai
Thank you so much sir love you aapne mera kaam easy kerdiya once again thank you so much
Thanks Sir
Sir relay dono garm hori hai fuel pump ki motor bhi check krwaa di fr bhi garm hori haiii please kuch btaao
Negative wire drowning from battery direct to relay
Fuse nikalne se bhi chor gadi lejayega kya?
Fuse nikake start nahi hota
@@easyenginegypsy4703Sir Dhaka daeke start hoga bina fuse ke bhi? Thnks 👍🏼
Sir ji Maruti gypsy fuel pump aur main relay mai earth nhi aa rha hai, please batai kya Karn hai
Pl. Needed to be check wiring
Best sir. Thank you. I m happy to see. Very helpful you are
Sir ek fog light jal rhi hai dusri ni jal ri to kya karu bta do pls..
Cut existence wiring make new wiring as uploaded video head light tell light wiring OR check operating switch OR check relay if there OR check bulb OR check for loose contact OR check proper Ground etc……
Sir alternator ka video bhi banaeye plz
Sir please refer uploaded video on alternator
Gypsy valve timing setting tell me sir
sir can tell me colour code for fuse box witing
also explain wireing colour code
What ever information I had that’s I delivered on fuse box, it difficult for colour coding of wire, thanks
Euro 2 or 3?
3
I have working 3 relays near ECM.
And also, my battery is new (1 week old)
But something is draining my battery.
I have checked all wirings but found no fault
What may be the problem?
Faulty ECM or?
No not ECM after ignition switch off, only battery supply connected with head lights tel lights and horn and 4 switch indicator cut supply of that one by one for check of problem of drain of battery if something found cut that wiring permanently and preper sepret home made Owen wiring by use branded wire and proper joints fuse use also relay all ready wiring video uploaded on channel for horn head lights
sir vedio is use for me can you create carborator gypsy vedio how to start after month
Thanks for this video👍
Tquu sr osm bro and great 👍 👌 👏 🙌
Thanks 🙏 Sir
Thanks for ur video, help me for not working indicator s
Jai Hind
Jai Hind Sir
Wowww
informative.. :)