Thank you so much for the video. I have a 10 L machine and had a plugged into an extension cord and had a kinked hose…was looking at new ones so thank you so much😀💯🙏
I have a system that is showing indicating low oxygen, after I have service the back filter the warning sign kept on coming, what could make the low oxygen to be coming on and on?
I had a O2 concentrator similar to that one. I put a "Light bulb timing device" in on a different breaker and the red light came on with it's beep. I restarted it numerous times to no avail. Insurance company got me a new one and it did the same thing. I removed the timer, and the machine works just fine. Any idea what the connection would be there? I've been an electrician for 40 years and I got no explanation.
My red and yellow lights are on. We had power outages yesterday. I turn it on and off. When it starts back up it doesn’t show yellow light, within a few minutes it’s yellow again. Wondering what it means?
I have watched four different videos, hoping to find someone that shows us how to clean out the filters. There’s a door on the side and one in the back why is no one showing us how to clean out the filters on the concentrator?
I have a quirumed oxygen concentrator which indicated error 01 after i switch it on and it runs for 25secs. The fault code in the manual means that the air pressure cannot reach standard levels..how can i resolve this? Please help
What colour is your alarm yellow usually a leak or replacement Sieve beds needed red could be the capacitor needing replace or the rotary valve may not be working also there is a few problems with the pcb boards all which will have to be replaced 525 oxygen machines usually run for 8000 to 10000 hours before needing a new set of Sieve beds and a compressor kit
Hello! I have a problem with a new oxygen concentrator, the problem is that the oxygen ball doesn't go up at all. What can be the cause? Can you please help me with an answer/solution? Thank you!
@@ersansubmission6815 yeah, i found the problem by myself and fix it by myself. So the problem was that a main cable/a hose from inside the device, was broken, was a little drilled... . So you have to open the device and fix or replace that hose, i just glued that perforated inner hose. Succes!
It’s reset button listen to the sound of the bu(TT)on sound out what you say . This generation of lazy people that don’t sound out and pronounce the word . Omg!!
Thank you so much for the video. I have a 10 L machine and had a plugged into an extension cord and had a kinked hose…was looking at new ones so thank you so much😀💯🙏
When using the nebulizer is connected. I have to crank it up to full blast 4.5 to 5liter flow to get mist from nebulizer. Is that normal ?
I have an Enduro 2 that says service required but I don't have a manual could you please help me out
Thanks for the video.
Si mund te kotaktojme me e ble nje aparat dhe sa kushton
I have a system that is showing indicating low oxygen, after I have service the back filter the warning sign kept on coming, what could make the low oxygen to be coming on and on?
I had a O2 concentrator similar to that one. I put a "Light bulb timing device" in on a different breaker and the red light came on with it's beep. I restarted it numerous times to no avail. Insurance company got me a new one and it did the same thing. I removed the timer, and the machine works just fine. Any idea what the connection would be there? I've been an electrician for 40 years and I got no explanation.
Thank you.... but waht about if no lights signal at all? waht shoud i do?
My red and yellow lights are on. We had power outages yesterday. I turn it on and off. When it starts back up it doesn’t show yellow light, within a few minutes it’s yellow again. Wondering what it means?
got a yellow light keeps popping up and beep on my mother's oxygen converter and not sure what issue is?
I have watched four different videos, hoping to find someone that shows us how to clean out the filters. There’s a door on the side and one in the back why is no one showing us how to clean out the filters on the concentrator?
Did you find one?
Can it be turned off and on as needed?
I have a quirumed oxygen concentrator which indicated error 01 after i switch it on and it runs for 25secs.
The fault code in the manual means that the air pressure cannot reach standard levels..how can i resolve this?
Please help
I can't get anyone to service my concentrator. I own mine. They tell me if it's nor their they will nor help
I've tried everything, filters, airflow, temperature, plunged directly in the wall and still it alarms after about an hour.
What colour is your alarm yellow usually a leak or replacement Sieve beds needed red could be the capacitor needing replace or the rotary valve may not be working also there is a few problems with the pcb boards all which will have to be replaced 525 oxygen machines usually run for 8000 to 10000 hours before needing a new set of Sieve beds and a compressor kit
Wat s the use of ths video u r jus trying to show only his face instead of concentrator, wasted my time
Hello!
I have a problem with a new oxygen concentrator, the problem is that the oxygen ball doesn't go up at all. What can be the cause? Can you please help me with an answer/solution?
Thank you!
hello, do you have the answer, i have the same problem
@@ersansubmission6815 yeah, i found the problem by myself and fix it by myself. So the problem was that a main cable/a hose from inside the device, was broken, was a little drilled... . So you have to open the device and fix or replace that hose, i just glued that perforated inner hose. Succes!
Could be numerous things including the tubing onto gauge has came of or could be the capacitor for the compressor is not kicking it on
Every 40 minutes it wants to beat babe babe babe
Sper pas
It’s reset button listen to the sound of the bu(TT)on sound out what you say . This generation of lazy people that don’t sound out and pronounce the word . Omg!!