I had a misfire problem from the number 3 wich is in the back by the intake and I knew it was going to be hard just by looking at it, but then I found this gem of a video and thanks to God and you I was able to fix it really easy. Thanks again for your video! Keep it up ✊🏾💪🏾
When u had the misfire did u feel ur car was abit slower and had less power? And when u replaced it and everything was good did u feel that u regained the power? And felt a difference?
Thanks for the way you showed the steps on changing the spark plugs on the Nissan Maxima, you made it simple now I can follow these steps myself. 5 stars for you sir 👍
Highly recommend that adjustable wrench for the socket. There is a screw in the back left by the two clips and two hoses. It is a #10 for the socket or a Phillips offset drill. That was the hardest part. He doesn't show it on the video but good luck folks
I just changed the spark plugs on a 2004 Maxima, but after I put everything install back and I start the car, it runs ok but, I got antifreeze leaking, it was a pond under the engine; I couldn't check where was leaking because it was dark, tomorrow I'll check. But do you have an idea what I did wrong or what could happen? I appreciate any help!
Question when you remove the intake you don't have to change the gasket jus n case something happen whit the old one or l need to buy a new one thanks for the video
Hey man, did you do this because of performance issues? I recently got 3 coil packs on the back changed and ever since then my car has been bucking and kicking at like 20 mph, I have the same car with the car and you know how it usally stays around 1100 rpm till you get too 30mph. Acceleration from 20-40 is sluggish and somtimes the car jerks, I hope it just needs new plugs. Ima try it thx
Cesar Hernandez yeah I was having a little back fire and kick at low rpm and I noticed my fuel economy was terrible as well ... But yeah I definitely recommend it if you are experiencing those issues! Good luck I hope it helps!!
Go-Getter Garage hey man it fixed my car jerking and bucking now I have full power again, only problem is my valve covers are leaking so ima have to get back in there, using your video as a reference for the next job. Thx tho 💪🏽
@@TheSpradlingCody emh295 is the gates parts number but you should be able to locate at any auto part store honestly I didn’t even use the original one I just used some fuel line and cut it to size
What is the name of that hose that you had mentioned that tends too crack i replaced all my plugs successfully but broke the old hard hose in the process 🤦♂️
@@GoGetterGarage hey man I just did my plugs on my 06 maxima and you're absolutely rite.. its not that bad but definitely time consuming, thanks for your video and I was able to do it exactly how you showed!
The constant moving of your camera; and not to mention to the horrid music blaring out; makes it impossible for a sane person to follow what in the pluperfect hallelujah you are doing. Oh well. So I will go somewhere they do NOT have any form of audio; EXCEPT the voice of the narrator AND the camera is fixed so it does not wreck our eyes trying to chase a constant unnecessary movement of the camera.
I had a misfire problem from the number 3 wich is in the back by the intake and I knew it was going to be hard just by looking at it, but then I found this gem of a video and thanks to God and you I was able to fix it really easy. Thanks again for your video! Keep it up ✊🏾💪🏾
Don D I’m really glad it helped!
Did you change your spark plugs or just coil did it fix it?
@@juangacho801 it fixed it but once I was able to work in there I changed them as well.
I have a misfire on 3 as well, I’m glad I saw this comment! Gave me some hope
When u had the misfire did u feel ur car was abit slower and had less power? And when u replaced it and everything was good did u feel that u regained the power? And felt a difference?
By far the simplest tutorial I’ve seen for this! Under a dozen steps and no unnecessary bs. Thank you very much!
Keep your videos going, I have been a mechanic for 40 years , your video was very informative and you explained perfectly.
Great job young man !!!!!
Thanks! :) I really appreciate that!
Thanks for the way you showed the steps on changing the spark plugs on the Nissan Maxima, you made it simple now I can follow these steps myself. 5 stars for you sir 👍
This is the best video that I've seen on replacing Maxima spark plugs. Good job
Great video my guy!!! I have a 2006 Nissan Maxima I’m restoring with my youngest son!
VERY Well Done. This video is the best example that I have seen on changing plugs for the 6th generation of Nissan Maxima.
Thank You
Best video for the v6 Altima hands down 🙏 thanks to you the process was easier and less intimidating
Facts!
Just finished !! only a couple hrs ! Thank you for the video boss man !!
Heck yeah man no problem
Explained extremely well.... I can do it!! 👍💖
Best Maxima spark plug video period
Thanks bro. You are saving me hundreds!!!!!!!
Thanks man people tryna charge me 600 for this job found your video and I’m like I’ll do the shit myself now
Hell yeah brother best of luck! 👍🏻
by far the best video I've seen online. Great job my man and well communicated!
hey thanks for this, im about to attempt this on my partners j31 it looked like a pain in the arse at first glance but you showed how easy it can be.
Great video my guy! Gotta change my wife's and this video will for sure make sure I do it right and most importantly put it back together right 💯
Awesome man good luck! Glad I could help 👍🏻
you made this look so easy
Your a pro, You made it look easy. Thank you for the video. Thank you for putting it all back together as well!!
I’m glad you enjoyed bro!
Well made video... bravo 👏 ❤
Highly recommend that adjustable wrench for the socket. There is a screw in the back left by the two clips and two hoses. It is a #10 for the socket or a Phillips offset drill. That was the hardest part. He doesn't show it on the video but good luck folks
Awesome video. Seriously thanks so much man
Thank you bro
This video Helped me alot
Great video. Well said and easy to understand….Kudos brother
Amigo Felicidades me gusta muy buen video exelente explicación perfecta gracias, y ahora me toca ami hacerlo, con un 2011 .
Great job! You should consider removing ALL jewelry when working on cars!
Yeah forsure next time! 👍🏻
Keep up the awesome work man
Very good bud.
Yeah boi! I should drop max off for you to do some maintenance videos on :) haha
DEADBEATGARAGE hell yeah anytime !!
Thanx I'm about to do mine today
Great video
good video it is clear show what you doing . keep up good work for helping people .thanks a lot
Yeah man no problem thank you for watching :)
Awesome video thanks
Best video. Thanks very helpful.
Best video online
Awesome dude
Excellent video
Thanks homie u a big help fr
Thank you! A'm about to do this.
Best video
thank you very much for this video
xtractstudios your welcome! Glad it helped :)
Great info
I just changed the spark plugs on a 2004 Maxima, but after I put everything install back and I start the car, it runs ok but, I got antifreeze leaking, it was a pond under the engine; I couldn't check where was leaking because it was dark, tomorrow I'll check.
But do you have an idea what I did wrong or what could happen?
I appreciate any help!
Could you do a “how to clean a throttle body” on a 2007 Nissan Maxima?
All I’ve seen are older model maximas.
All you half to do I clean it with a paper towel it’s take 2 minutes that’s probably why there is no videos
Question when you remove the intake you don't have to change the gasket jus n case something happen whit the old one or l need to buy a new one thanks for the video
Honestly just look at the condition it’s recommended to change it out tho
hell yeah
Sickk🔥🔥
Grasias por el video esta muy bien explicado 👍🏼
Danny Cornejo de nada 👍🏻
So will I need a new intake gasket or will the old one resell
It depends on the condition. I wouldn’t risk it even tho I did lol might as well change it wel your there
Is there a gasket that needs replaced on the manifold?
JOHN BOLLING in the intake manifold yes most of the time when doing this repair you might wanna buy a new one...
Hey man, did you do this because of performance issues? I recently got 3 coil packs on the back changed and ever since then my car has been bucking and kicking at like 20 mph, I have the same car with the car and you know how it usally stays around 1100 rpm till you get too 30mph. Acceleration from 20-40 is sluggish and somtimes the car jerks, I hope it just needs new plugs. Ima try it thx
Cesar Hernandez yeah I was having a little back fire and kick at low rpm and I noticed my fuel economy was terrible as well ...
But yeah I definitely recommend it if you are experiencing those issues! Good luck I hope it helps!!
Go-Getter Garage hey man it fixed my car jerking and bucking now I have full power again, only problem is my valve covers are leaking so ima have to get back in there, using your video as a reference for the next job. Thx tho 💪🏽
Cesar Hernandez that’s great man glad I could help!
@@cesarhernandez9650 cesar Hernandez y was the car jerking?? Or did it jus need new spark plugs??
@@1384-u7g just needed new plugs
Great video but please check your gaps they are not always correct from the factory!
The tip is really sensitive I didn’t want to risk damaging them
But noted for next time thanks!
Great video but the music is too loud. Constorting your voice bro...
Great video, very helpful. Your background music is absolutely terrible.
I think you mean terrific?
How long does this take you? The mechanic told me it will take half a day?
No honestly if everything goes smoothly about 3 hours the bolts on the back of the intake are the hardest thing
Will this procedure be the same for a 2014 Max?
Do u run synthetic oil in that thing? sounds like you need to.
That noise isn’t the lifters… that is the injectors ticking
What is the name of the hose that “cracks easily” mine split in half
Valve cover to valve cover breather hose
@@GoGetterGarage Thanks for the video has been a lifesaver
@@GoGetterGarage do you happen to know the part number? Or is it like some thing common that I can get at any auto parts store
@@TheSpradlingCody emh295 is the gates parts number but you should be able to locate at any auto part store honestly I didn’t even use the original one I just used some fuel line and cut it to size
@@GoGetterGarage got the part but can’t seem to get it on, any advice?
Gracias
Alvaro Balderas de nada
will this video also apply to a 2004
Yes same process unless it’s a four cylinder
What is the torque on those intake manifold bolts?
Good job. But you should always remember. Safety first. Remove your ring next time.
Noted Thanks man!
What is the name of that hose that you had mentioned that tends too crack i replaced all my plugs successfully but broke the old hard hose in the process 🤦♂️
JoJo Hurtado dang honestly I don’t remember but if you go to autozone or the parts store they should know I believe the one I bought was door man
Go-Getter Garage thanks appreciate the honest feed back enjoy the rest of your day
Where are the 2 bolts behind the intake manifold
Did you have to do an engine idle relearn after this?
Teflon Jon no
@@GoGetterGarage Awesome, great video thanks 😁
Would this apply to a 2016 maxima. TO PAY 400.00 to change out plugs is crazy. So I'm going to attempt
Honestly yes it looks the same but I’m not sure lol
Where are you located
you should stright pipe it it sounds good i did mines
How long does this job take?
RepairButlers took me about an hour first tome took me about two hours
I have 5/8 and cant get spark plug out
Should you replace the coils?
Phil if I could afford it yes I would! It would definitely help lol
@@GoGetterGarage how much are they?
@@finessethaprofit7325 about $40 each so like $240 plus tax
@@finessethaprofit7325 that’s for oem
And the dealer wants to charge me a grand for this. Looks like the hardest part was getting to the back of the intake
The back was the most tedious part lol but not to bad honestly
i know a lot of ppl just change the plugs in the front and forget about the rear lol
I gotta replace my plugs and this looks a little intimidating 🤦🏽♂️
It’s not that bad I thought the same thing lol
@@GoGetterGarage hey man I just did my plugs on my 06 maxima and you're absolutely rite.. its not that bad but definitely time consuming, thanks for your video and I was able to do it exactly how you showed!
Damn nissan why do you have to be so difficult all that for some plugs 🤦🏾♂️
Looks like alot...@_@
But ill be doing this very soon!!!
My vehicle does not respond to the gas pedal
I would check the check engine light codes
Thought it was 6 spark plugs in this car 🤔🤣
There is I have the same car it’s so annoying
Man i wish i had seen this video before wasting my time watching the others...
The constant moving of your camera; and not to mention to the horrid music blaring out; makes it impossible for a sane person to follow what in the pluperfect hallelujah you are doing.
Oh well. So I will go somewhere they do NOT have any form of audio; EXCEPT the voice of the narrator AND the camera is fixed so it does not wreck our eyes trying to chase a constant unnecessary movement of the camera.
Lol I appreciate the feed back I’m sorry I’m not a professional. I’ll definitely note this for future ideas. Thanks 😊
@@GoGetterGarage Well what do you know, you didn't flame or attack me. VERY rare. Thank you. Take care kind Sir.