How to Replace Rear Wheel Hub Bearing 2013-19 Ford Police Interceptor Utility
Вставка
- Опубліковано 12 вер 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2013-19 Ford Police Interceptor Utility.
• Check here for more videos on the 2013-19 Ford Police Interceptor Utility: • Ford Police Intercepto...
This process should be similar on the following vehicles:
2013 Ford Police Interceptor Utility
2014 Ford Police Interceptor Utility
2015 Ford Police Interceptor Utility
2016 Ford Police Interceptor Utility
2017 Ford Police Interceptor Utility
2018 Ford Police Interceptor Utility
2019 Ford Police Interceptor Utility
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Pry Bar 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 18mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• 32mm Socket 1aau.to/oa/1AAS...
• 8mm Socket 1aau.to/oa/1AXA...
• Brake Caliper Hanger 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• T40 Socket
• 1/2 Inch Breaker Bar 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa/1AXS...
• Copper Anti-Seize
• Sandpaper
• Center Punch 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Ford Police Interceptor Utility: • Ford Police Intercepto...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
So you see the two missing wheel studs @3:02? That's because the mechanic likely cut them off near the wheel assembly face, then punched them through. Once you have two opposing holes, go get two grade 8 (preferably, 5 if that's what your local hardware store has) fine thread bolts just smaller than the stud (I used two inch Hillman fasteners 1/2x20 with corresponding nuts and a washer on the outside edge). Use the bolts/nuts as a "press" to push the hub off. In UA-cam search "Is Your Car or Truck Wheel Hub Stuck? Tips on Getting it Loose!" from 1AAuto (Lol because they use a Ford as the exemplar) and "How to easily remove a stuck wheel hub assembly **Works for ANY vehicle with a sealed unit bearing**" from Certified Shadetree. I bought my hubs from TRQ and new rotors & pads... I'm seriously stuck on getting the hubs out. Of course I'm on jack stands in my driveway, no lift. W00f.
::Finished job before finishing the post:: I ended up being able to use the bolt/nut press. Wicked easy & quick. I'll be buying another pair of TRQ hubs for my wife's Flex... they're starting to groan as well.
Todd, I did the HD bolt press way and ended up separating the hub assembly. Now the other half is still in the knuckle. I guess only option is to pull knuckle and have it pressed out?
Great video always. Though I am not doing it myself I love to know how it is done. So I know when the mechanic is trying to put wool over my eyes thanks again.
THAT man is a professional.
By the look of that hub, he was wailing on it for a few hours before he restarted the camera.
Exactly hahahahaha
Right..he beat the shot out of that hib before it came out
Such a well done video with clarity, good video capture and all conversation was helpful information.
Thanks for sharing this!
I have replaced alot of these and none of them have ever come out that easy.
you can see the battle scars on the bearing at 3:03 :) I still trying to get mine out
How do you get them out?
those are always seized in.
What do you do in that situation?
@@JWGREEN1000 Pray and use a large hammer or puller tool
‼️Good job
👍😉😀
I call bs. Never come out with little hammer blows.
Why not tell use how you really did it,hahaha,this is joke