Long press the single button at the back and it should react like in the video. Then just set it to where you want it. To go back just continue going forward it will eventually reach the end and go back ao you can set it lower
Salamat sir. Double check ko din. Baka kasi yun positive nailagay sa ignition din hindi rekta sa battery. Yun sensor kakabili lang sir pero baka nga may sira. Hehehe
Unfortunately I sold this gauge already and the only diagram I can show is in the video. But to sum it up, from the gauge there are 4 wires that you will use. One positive, one negative, one signal, one ignition wire. From the sensor there are 3 wires. The positive, negative, and the signal wire. The test here shows that i connected the 2 positive wires with the ignition wire to trigger the gauge on.
![Defi A1 Standalone - Setting [Part 2]](http://i.ytimg.com/vi/HO39klWemB0/mqdefault.jpg)
Bro, how do you increase the boost warning limit higher? I dont have the manual already. Thanks
Long press the single button at the back and it should react like in the video. Then just set it to where you want it. To go back just continue going forward it will eventually reach the end and go back ao you can set it lower
Can you make the wire connections more clear on the video Please?
Hi, unfortunately I sold this gauge already so this is the only time that I can show the wiring connections.
Hi how did you connect the boost sensor to the gauge?
There is a signal wire coming from the sensor (blue in my case) which you connect to the gauge (I believe it was a red wire from the gauge).
@@justinnnandrew did you connect the black wire from the gauge
@@mx3248 yes it's a ground wire
Hi, so you don't need a defi controller to make it work?
Yes this one doesn't need a controller to work. It just needs a sensor and will work by itself.
@@justinnnandrew i see.. alright then thanks for the informative feedback
I changed the colour but it won't save. Please help🙏
Hi I'm sorry but I also don't know why it doesn't save the color. Probably it could be a defect in your gauge.
Sir ask lang. Yun boost gauge ko pag on nasa 0.3 bar na agad instead of 0 anu po kayang gagawin dun? Thanks.
Kung sa negative 0.3 , normal lang yun may vacuum po during idle
Sorry on palang pala no. Baka sa sensor ang issue may nadedetect agad na pressure kahit on palang
Salamat sir. Double check ko din. Baka kasi yun positive nailagay sa ignition din hindi rekta sa battery. Yun sensor kakabili lang sir pero baka nga may sira. Hehehe
Can u show the wiring
Unfortunately I sold this gauge already and the only diagram I can show is in the video. But to sum it up, from the gauge there are 4 wires that you will use. One positive, one negative, one signal, one ignition wire. From the sensor there are 3 wires. The positive, negative, and the signal wire. The test here shows that i connected the 2 positive wires with the ignition wire to trigger the gauge on.
Bro bat yng defi boost sa baba ngstart yng kamay skn sa zero kagad
Baka di na gumagana yung calibration sa umpisa or baka naman di nag off ang gauge mo naka rekta pa din sa battery
@@justinnnandrew yun ang d ko alm yng iba nkkita ko di sa zero kagad nkatutuok yng kamay. Cge sir doubl check ko
Punya saya kok sudah ganti warna tapi tidak kesave ya