I BUILT A FPV RACER DRONE!!! (Time-Lapse Build)
Вставка
- Опубліковано 18 лис 2016
- It took me more than five hours (or almost seven including the unboxing and software setup) You may wonder what specs I used in this drone.
Specs:
Frame Part:
Totem 330 Center Board
4* Totem Short Arm (approx. 104mm)
***The frame is approx 260-270mm Diagonal
Power System:
4* Readytosky MT2044-2300kv Brushless Outrunner
4* SimonK 30A ESC (Unbranded)
2200mah 3s 25c Lithium Ion Polymer (Li-po) Battery
6045 (6*45) plastic propeller
Control:
Fs-i6s (TX)
FS-iA6 (RX)
CC3D Flight Controller (Rev.)
This is the second drone I've ever build and it's not tested out yet. Hopefully it will successfully take off tomorrow.
Hi